Flashforge 3D Printer Parts Flexible Build Plate Kit for Creator Pro, Dreamer, Inventor and Creator Pro 2 Upgraded Print Platform

The media could not be loaded. This is a MUST have if you have a FlashForge Creator Pro 2Easy to put on and get lined up, relevel and calibrate and you're all good to go.

Everything about this plate is great. Completely remove the bed to install, removed stick on oem bed and installed the magnet. With the added thickness of the magnet and flex build plate are too level the bed.Has to put a spacer on back of my Flashforge to level it out and allow for adjustment. Overall after changing spring/shimming

Not anywhere near as flexible as it is described. Not a huge fan of this product but love the idea

There are 2 big problems with this product when printing with ABS filament.You first apply the included self-adhesive magnetic sheet to the existing aluminum print bed. Then you place the included steel print bed on the magnetic sheet. It has the blue plastic print surface shown in the catalog.The recommended bed temperature of 105 to 110 degrees C for ABS bakes the magnetic sheet to the underside of the steel plate which makes it very difficult to remove. After prying the steel plate off of the print bed, its even more difficult to remove the ABS printed part(s). The print bed is flexible so you would think the parts would pop right off. That is not the case. The ABS sticks so well the the blue print surface that it is extremely difficult to remove the parts without damage.This may be a very good product for other types of filament but not for ABS. I made two attempts and gave up. The parts turned out okay but I damaged one getting it off. Now I have to scrape the adhesive from the magnetic sheet off of my build plate and go back to using glass.Do NOT use this product for printing with ABS.

Installed on Flash forge Creator Pro. You may have to adjust the small nuts higher on the leveling screws if you can't level it.. otherwise install was easy and popping prints off is great!Highly recommend this kind of upgrade and this is a easy way to do it.

Worthwhile upgrade! Did not need z-axis adapter. Squeeze the leveling screw tight and allowed about half turn adjustment during calibration. Now most prints do pop off, even the PETG prints. Highly recommend.

Such an improvement! Can't wait to get some for our other machines when they come back in stock!

I bought this mainly for the custom size cut magnet sticker. Then I put my good Ender 3 removable PEI sheet on top. Of course the PEI sheet is larger but no problem/collision for printing on the Creator Pro 2.Not sure if a shim is needed but I printed a 2mm one and double-sided tape it on, plenty of spring left with shim so I suspect if you do it tight no shim is ok.Tbh if you can find a cheaper one with same size magnet go for that. This surface is not very good, slightly hard to remove prints especially prime lines, bottom texture is meh.