ALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V

PROS: * Inexpensive * Two USB ports * Display screen * 12v and 24v * Supports multiple battery types * Very customizable * D2D Dusk to dawn (unexpected feature I really like) CONS: * PWM Pulse Width Modulation rather then MPPT * Connectors are a little small (It will fit 10 Gauge wire but just barely This is a PWM controller but for the money you save buying this controller rather then an expensive MPPT controller you could buy an extra 100 watt solar panel. For instance a Renology 20 amp MPPT controller is around $100 more. My last 100 watt panel cost me $108 delivered. The more expensive MPPT controller might be a better choice if space is extremely limited and you need to squeeze out every watt. For the rest of us this is a pretty good choice. The display: It's not the worlds greatest screen and I wish it had a back light but I have terrible vision and I can still see it just fine. If you mount it somewhere dark bring a flashlight. The default screen shows battery voltage, battery level, and whether the battery is charging. Buttons scroll through other information like charging amps, load amps, temperature of controller, and optional settings. The USB ports: These are convenient. I have charged my phone with these ports quite a few times. They are rated to deliver 3 amps combined. You won't be fast charging with these ports but they work fine. 12v / 24v: I won't go crazy explaining this but 24v can be better with long cable runs. I use 12v with short runs for convenience. This controller will do either. If you need 48v they make a controller that does that too. Supports multiple battery types: I use lead acid but you can also use Lithium Ion, and LIFePO4(Lithium Iron) For portable use Lithium Ion and LIFePO4 can save weight! Customizable: I won't go into every setting here but you can change things like cutoff voltage, charging voltage, low voltage reconnect, and turn short circuit protection on and off. D2D Dusk till dawn: I wasn't expecting this feature. This allows the controller to automatically turn on things like lights as soon as the sun goes down. If you want to set up outside lights this feature works great. I have been using this feature for solar night lights that actually work. This would be great for lighting a cabin, remote shed, or a long driveway. I was going to subtract a star because the manual didn't contain details on some advanced features but when I contacted the company they quickly responded with an updated copy of the manual. The updated version explained some features I previously didn't understand.

The charge controller works fine and I received prompt and courteous customer support after having a brief issue with a different product I hooked up to the ALLPOWERS Solar Charge Controller. I thought the charge controller didn't work properly but the folks at ALLPOWERS helped me diagnose the problem and the controller works great. I purchased this controller to charge the battery in a ham radio go box I made, and it has worked wonderfully for that purpose. I've had no issues with the controller, it's lightweight, small and easily hooked up. The main thing to remember is to always attach your battery to the charge controller before anything else. The battery basically turns the controller on. For the price, I don't believe you can find a better PWM charge controller, and the ALLPOWERS people were prompt and courteous in resolving my concerns. Any questions, please let me know and I'll try to help. Thanks for reading my review.

Pretty amazing for being the most affordable solar charge controller of decent quality. Was easy to install and is working as described in my van. Some little quirks like float volts can be set, but not equalize volts. Load on/off does not turn USB on/off. But just having USB, float volts setting, digital volts display; pretty amazing for the most affordable. 4 stars because a simple common question arose during install and I could not get an answer from the manual, the support phone, or the support email. To improve it could include a more thorough and clear manual, and a prompt proper English response to support emails. The question was if it was okay to disconnect and reconnect the battery for days at a time, without disconnecting the panels. The manual mentions always connecting battery first, but also says the controller handles a low battery voltage, so not clear. Relevant to most RV installs, to know if panels need to be disconnected every time battery is.

Oh boy, this is a good controller. I have a controller from Harbor Freight and there's no comparison. This controller is precise, accurate and smart. It's ideal if you want to charge a battery in the best way possible. It identifies what kind of battery you have and it provides the ideal voltage. It protects the battery from overcharge and it also has an optional feature that protects the battery from over depletion. Yes, I wish it had a couple of features that it doesn't have, but for $20, I have no complaints. This is real bargain. Here's what I wish it had: 1. An instructional manual written in comprehensible English. You'll have to go on YouTube to see this thing demonstrated if you want to know how it works. But the good news is, the chances are you will not want to change the settings. The default settings are ideal for AGM batteries. 2. The ability to use it without a battery. Why is this important? It's not. But if you connect it to a solar panel without the battery attached, you run the risk of ruining it. So long as you are sure you connect the battery first, you'll have no problem. And when you disconnect it from the system, disconnect the solar panel first. Just remember you'll never want the solar panel connected without the battery. I especially like the fact that I can glance at this controller and see the state of charge of my battery. I don't know of any other controllers that have this feature. It's a great feature and I wonder why it isn't even mentioned in the documentation. If you are in the habit of just checking voltage, that' a habit you should break. I was going to spend $50 on an amp hour meter but then I realized I don't have to because of this controller's feature. I don't see any controllers out there that are as good unless they cost more than $100. I'm quite impressed.

Funktioniert seit ein paar Jahren einwandfrei! Bin zufrieden...tut was es soll

This is the best and accurate Solar Charge Controller you can obtain; don't waste your money on cheaper solar controllers that are inaccurate and poorly built, buy AllPowers for a top quality build! I am not being paid for this review; only posting an honest review!

Acheté en Juillet 2024, il fonctionne toujours bien avec un panneau de 50Wc et une batterie 12V/26Ah Plomb AGM. Par contre, il faudrait se mettre d'accord sur les réglages du type de batterie : D'une part vous avez 3 réglages listés : B01 (Plomb-Acide) - B02 (Lithium) - B03 (LIFePO4) D'autre part, 4 réglages : B01 (Plomb scellée) - B02 (Plomb gel) - B03 (Plomb acide liquide) - B04 (Lithium) Le tout sur la même page de produit... Alors quoi ? Plomb Gel et Plomb scellée sont toutes les deux "étanches", pas facile de faire la différence... Dans la deuxième liste, le LIFePO4 n'est même plus présent. Merci, pour le bien de tous, de faire une bonne fois pour toutes la lumière sur les différents réglages de batteries !

I like the quality construction (inside it) and the features. The adjustable voltage setting to have the loads shut off is nice. Same for the adjustable setting to have the loads energized again. Having two current readings; one from the solar panel and another for what is being drawn off the battery is nice. I bought this to replace the bare bones controller that came with a Coleman 100W 12V panel. Nothing wrong with it but it has no display, was non adjustable and had questionably sized wire compared to the heavy wire from the panel. For the price I might buy another for my cottage system. The manual is good. The print was small for my old eyes so I had them email me the PDF manual. Now its on my phone where I can find it and zoom in to read it (or print full size). I would probably change the menus/buttons a bit if I was programming it but that is just being persnickety.

Why did you pick this product vs others?: Good product. Working fine at high current. Not much heating up.