Junction Box, Zulkit Project Box Waterproof Dustproof IP65 ABS Universal Electrical Boxes Enclosure with Fixed Ear Black 5.91 x 3.94 x 1.73 inch (150 x 100 x 44 mm)(Pack of 1)

Good quality materials and accurate description of dimensions means these fit perfect for what I needed. Tip: Holes drilled with a stepped drill bit turned out perfect with the density of the plastic where the first hole I drilled with a normal bit walked around a little on the surface.

I used one of these to create a waterproof switch box for our outdoor cat shelter's heated floor. The ample size gave me plenty of room for what I needed, which was just space for 2 switches and the main power entry point. The included pre-drilled holes/mounting points are a welcome touch as well. There are numerous spots inside for stand-offs or mounting items inside, although I didn't utilize any of them. Being made of ABS, it will obviously be brittle, but working with care, you can easily avoid any accidental cracks/breakage. I used a combination of my drill and dremel to cut out the openings for the 2 power switches and the actual power cable's female port. The seal/gasket material that is included was more than enough, and I've found that as long as you tighten everything down EVENLY, it creates a very good seal.

Very good box! Best quality and great price. Thanks

This worked for my project. The box is sturdy and the mounting tabs work well. The gasket fit well and seems to be sufficiently water tight (I'd call it splash proof, not submersible). Only complaint, there are only two mounting bosses for a circuit board and they are not really well positioned. No screws are included for the mounting bosses. That's really the only thing that keeps me from giving this 5 stars.

Didn't use this but it seems sturdy

Mini solar charger and battery box

This year I wanted to line the sidewalk up to my house with a string of RGB smart Christmas lights. I put each light on a stake that pushes into the dirt and aligns level with the sidewalk. However, the length of my sidewalk was such that I had to buy a longer string of lights than I had sidewalk, so I had about 17 extra lights that had nowhere to go. So I purchased caps where I could remove the bulbs and cap off the sockets - mistake. I should have removed the bulbs BEFORE I purchased the caps and would have noticed that the light itself is not part of the bulb. The bulbs are just caps themselves, the light is built into the socket and cannot be removed. So I returned the caps and wondered how I could solve this. I thought that maybe a waterproof box where I could hide the extra 17 lights inside would work so ordered this. This box is plastic, a rectangular shape with no holes on the top or sides except for the screw holes. It comes with a piece of elastic gasket that you can easily insert into a groove on the edges to help keep it waterproof when the top is screwed on. I checked to see that the 17 lights would fit and seeing that they would, I then drilled a 1" hole into the side of the box with a spade bit (very easy) then fed the 17 lights/bulbs into the box. I screwed on the lid and hid the box in the grass next to the last lit bulb on the sidewalk. Because it's black, one can hardly see it. There's still the issue of the hole in the box where I fed the lights being open to the elements or bugs climbing in, but I plan to use a gasket or waterproof tape to block that off. When I remove the lights after the season is over, these 17 will just stay in the box, ready for next year. This box worked great for my Christmas light needs - especially because I was doing a sidewalk, so I could hide the box in the grass. If I were doing a roof line and had extra lights it might be a challenge to hide the box but I guess it's not impossible. Nevertheless, this turned out to be a great solution to having too many lights on the line.

really water and dust proof-works great an the perfect size=even comes with gasket to seal it off

Excellent Project Boxes and they will hold an Arduino Uno with room to spare.

Awesome

Bonne qualité, pour usage intérieure dans mon véhicule, facile a installer , dimensions éxacte a la description, mes connecteurs ont été facile a installer en percant la boite. belle finition pour mon montage.

Exactly want we wanted. a strong waterproof box.

Good nice, not too big, only this is, you need to drill your own access holes