10Pack 3.3FT/1M LED Channel Aluminum U Shape Silver LED Strip Diffuser Channel with Milky White Cover Easy Installation U1SW WW 1M

The package includes clips and screws to hold the aluminum channel pieces in place. The Most Fun part of installing is laying on my back and drilling pilot holes in the bottom of the upper cabinets. The little clips work perfectly to hold the channel sections in place. The kit comes with covers and end pieces for the channels, including holes for wire access. My original LED installation suffered from some overheating at mid-strip junctions, eventually causing breaks and dark sections in the under-cabinet LED strips. I've been progressively upgrading the various rooms with aluminum channel for the strips, so the aluminum might do a better job carrying and dissipating local strip heat. This kit was for the third room install, with the heat-dissipating function already proven. This channel kit has a significant advantage over the deeper channel kits I used for the first two-- the available light distribution is much less limited by the channel walls. I'm only part way through this part of the installation at this point. If there are changes I'll update the review. So far though, I/m happy with the product and the results.

These LED light tracks look great and give LED strips a much more clean, professional appearance. Instead of using the included mounting clips (which require screws), I used double-sided tape to attach the tracks to the wall, and it worked perfectly. I preferred this method because I didn’t want to put holes in the wall, and the tape made installation much faster and easier. It took two 10 pack 3.3ft track kits to fully go around the top of a bedroom (approx. 52ft.) with 14ft left over for my living room (see picture). If you’re planning to decorate with LED strip lights, I highly recommend using tracks like these. They make the lighting look far more polished compared to sticking LED strips directly onto a wall.

Used for under kitchen cabinet lighting. Very easy to install. Very professional look. I used 2835 3000K led light. The nonsolder clip style strip connector for 2835 fit very nice in tray. The 5050 clip style to large to fit in tray, however the 5050 led strip does fit well. Could still work fine but not as elegant as the clip in the tray. Loved that half endcaps had predrilled hole to put connector wire through. End up with great "led fixture" and clip in place is great. If you want to trial your light position under cabinet for the light effect, very easy to do, or if you want to relocate very easy as well. I installed with the diffuser on, ran trial with it on and with it off, I couldn't tell difference so put them on for ease of cleaning and just "light fixture" appearance. Can't imagine every not using these or similar product if going to trouble to light under cabinet...

I used these with a cheap but bright 25ft strip of RGB led lights and for the money these do a pretty good job at diffusing the light. They make piercing harsh bare LED's much easier on the eyes without losing much light. You won't be getting perfect uniform brightness like neon, you still see bright circles where the LED's are but it's pretty good. Installation was annoying at first, the screws didn't seem to stick to my magnetic bit and I kept dropping the screw and bracket, but got the hang of it and all setup I recommend these.

Great product

Appears to be decent quality aluminum channel and diffuser however the reason for 3 star is back to lack of chinese QC as usual. First time trying this brand for an undercounter kitchen lighting install; plan on further update after completed and tested. Channels are 1M in length and hardware kit is also included for mounting of the channels. In a past life I have installed and managed teams for professional telecom installations and secure sites around the country - have just a bit of knowledge for installations requiring 99.999% up time. The company would send installation packs to save time and costs and one thing you did not want to be short on were the nuts and bolts that literally were needed to install correctly and professionally. For these 1M strips I would want to place NO FEWER than 3 clips per strip (preferably 4) however this pack has 25 clips, 20 screws, 10 endcaps, 10 endcaps with holes. For 10 channels and 10 diffusers - at least the end caps match assuming none of the channels are cut to length for the application. The 25 mounting clips with only 20 screws is a bit confounding and if the clips were a standard type part available locally it would just be a frustrating trip to a store with lost time but not the case here. Will likely end up just drilling straight into the channel for mounting after going to the store to acquire more screws for the manufacturers lack of QC. UPDATE: As expected, not enough mounting clips. The diffuser works well but had to make a trip to the hardware store to pick up a pack of 100 screws. The clips make a small gap that helps with heat dissipation but ended up placing 2 clips and added screws at ends by drilling through the metal track making a solid connection but eliminates gap. For comparison see photo. Photo is a competitor brand but not an apples to apples comparison - the other brand is twice the track but pay attention to the hardware, you can see that this track (left pic) does not contain even half of the hardware of the competitor brand (right pic).

These work great for diffusing white for LED strips. On top of that they are easy to mount and I like the install clips because you can take the light strips on and off with easy. One thing I will say they’ll probably great for normal RGB strips but when using Phillip hue led strips they have a giant plastic cover around the strip so it fits tight in the aluminum strip and when you try to apply the lens cover it doesn’t clip in the place/hold. The remedy was scotch tape just wrapping tape around the lens and the trim to hold it in place which work fine for me. You don’t really notice a tape unless you book close cause it’s clear. On the plus side because if it’s so snug in the strip you don’t even have to use the adhesive on the Phillip hue back side. The lenses I cut the size with sharp scissors. And the aluminum strips I cut on my chopsaw with ease. Overall great product and would buy again if I was adding more LED strips.

Easygoing and they work perfectly 👍

These LED channels are pretty good. They make my strip lights look much cleaner and help diffuse the light evenly. Easy enough to cut and install. Recommend for a more finished look. Note that there are some hot spots, however.

MUY BUENOS PARA PONER TIRAS DE LED

Slimline and wide enough for normal led strip to fit, well made Chanel with easy to fit diffuser lid

I would not recommend buying this product, fitting the plastic diffuser cover is a nightmare.

These take a little getting the hang of but are really good. They need more clips to secure them when you cut them to different lengths.