Rain Bird 32HE In-Ground Pro Rotor Pop-up Sprinkler System Kit with Click-N-Go Garden Hose Connection

I was unsure of buying this as didn’t know if my water pressure would be any good. For the price I thought I’d give it a go. I like the fact that you can just plug a hose into the ground. I was installing a new lawn which meant I didn’t need to try and not damage any existing turf. Getting the exact levels right was still a lot of effort and I still had to do a fair bit of digging, even with 2 inches of top soil. I’m not sure you would fit this to an existing lawn easily. You have to dig substantial holes for each sprinkler and the plug in station. Now installed it works perfectly, covering my entire garden in the lowest setting. * advice. Put the distance setting on the lowest when you install. I did the opposite and found out that if you do the spray nozzle flies out and water just pours out and nothing works. It took me a while to find the little blue nozzles and work out what went wrong.

This is cool. I have a completely automated irrigation system for my garden lawn. **WARNING** This was a lot of hard work but it is so rewarding. Things I needed and used are: water pump (https://www.amazon.co.uk/dp/B09Q66NMLV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) I had low water pressure so needed a pump to raise the sprinkler heads. Water butt (https://www.amazon.co.uk/dp/B0FZV9DDS8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) This water but was more expensive than I needed. so any water butt will do. It stops back presure. Decent connectors (Hozelock - [home bargains]) The inexpensive connectos I had just leaked badly under pressure. Hozelock stopped all leaks and worked. Suction hose (https://www.amazon.co.uk/dp/B08F553G8S?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) You need a connector to suck from your water source. This one worked with my chosen pump Metal pins (https://www.amazon.co.uk/dp/B0D6FQ5C3G?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) When laying the spinkler hose pipe this held them in place nicely Long nose spade (https://www.amazon.co.uk/dp/B0FJ62ZJ9T?ref=ppx_yo2ov_dt_b_fed_asin_title) This is what I used to dig the spinkler hose trench. Smart plug (https://www.amazon.co.uk/dp/B07QWKDT96?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) Connected to Alexa app this automates the times the sprinkler is On and then Off. External power socket (https://www.amazon.co.uk/dp/B0CWY2Z3C9?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) The pump requires power. this is a very good external power plug socket. My setup was way more expensive than what I wanted but I now have a lawn that I am proud of and virtually maintenance free. Oh and Amazon. I just advertised a shed load of your products a monetary thank you would be nice ;) PROS: - This looks like it will last a long while and waters ever part of my lawn. CONS: - Depending on water pressure you will need a lot of extras. - It's not easy to install (because of the trench) ONLY images I can share is of a perfect lawn. The sprinkler heads pop up and down about 4 inches out of the ground so be aware how far down you dig your trench. Only dropped 1 star because unless your water pressure is high enough you will need a lot of things to remedy it and it becomes a bit expensive.. The photos will show a newly laid lawn

These do not work, only 2 pop up about 10 mil and dribble water around the Base of them, you need to physically push them all the way back In to activate all 4 but this is supposed to be a fully active system and for that reason it is unfit for.purpose.

I bought this set after quite significant research. I first bought a mains pressure tester, to ensure that they pressure at my outdoor faucet was sufficient. A £10 cost, but we'll worth the insurance of knowing you've got enough to actuate the sprinklers. I read 2.1bar which meets the minimum requirements. Having read some over reviews here I also purchased some clamps to stop the push connectors from popping off over time. My lawn is fairly large, and ultimately I needed two kits installed on 2 separate circuits which trigger at different times to ensure each get the full 2.1 bar pressure. Installation of the first kit took me about 5h. This was partly because of a couple of minor mistakes in length cutting which took time to rectify. Undoing the push fittings was very difficult. I also advice getting a pipe cutter for this job to make clean cuts. Again a minor £10 outlay. The second system took me about 4h, but this was much longer because of the very dry lawn I was cutting into. For the first set I was able to cut the a half moon lawn spade, and then push the tube down with a slat of wood. The second needed me to take up turf and essentially relay topsoil and seed. Both circuts have been in for a week now, both hooked up to a LinkTap controller, and have been working basically quite well. They do need about 30seconds to spring into life. Those furthest on each circuit do seem to dribble, gush and leak a little before fully actuation... which is annoying. Over all, it's a little more than I wanted to pay for the setup (which uses 7 of the 8 sprinklers I have from the 2 kits I purchased) but hopefully an investment into a better lawn. For advice, I get about 4.2m range on each sprinkler, and the head setup is a 10min job for each circuit. I run them for about 10mins each morning, which seems to be doing the job in the very walm weather we're having right now.

It’s ridiculous that they make a statement that it needs at least 8 gallon per minutes flow rate, but doesn’t state which type of gallon. Gallon is not a real SI measurement and there are different sizes. How do I know which one? This is insane. This is technical info, should be precise

Very good. Installed and all is well. Only downside is that it does not go as far as advertised. Still get a good coverage though.

UNFORTUNATELY THIS WAS A NIGHTMARE.TUBING NEVER FITTED OVER JOINTS I HAD TO HEAT THE TUBING UP FOR IT TO BE COME SOFT,THEN ABLE TO APPLY.,THE MAIN HOSE POINT IN HAS A BLACK CONNECTOR AND THE TUBING FITTED PERFECTLY. ALL HEADS LEAK SO NO PRESSURE. TO LATE TO ASK FOR A REFUND. TOOK ME HOURS TO DIG THE GROUND. SO SO UPSET.

Lawn looks great, no longer occasionally watering the lawn once its damaged. I use a wifi water timer and can choose how often to water the lawn and what time of day. But it is a pain to install with all the trenching (hire a trencher its worth it) and fiddly to get working if you want it to work with lower water pressures / add an extra sprinkler. I've bought spare nozzles (expensive) and used hot glue and a drill to make the holes point more upward. Bit hit and miss but the throw has increased by 50% and the spread is much better. (Yes I tried the screw adjuster first) only comes with 0.75 nozzles. If the nozzles were better I'd give it 5 stars.

Muy práctico, funcionan muy bien!

I installed this Rain Bird sprinkler kit in my front lawn, and it has performed exceptionally well. The instructions were clear, and all the parts fit together properly, making the installation much easier than I expected. The pop-up rotors provide even water coverage, and the adjustable spray pattern made it simple to customize the watering area. Once connected to a timer, the system has been reliable and keeps my lawn consistently watered without any issues. The components feel durable and well made, and everything has held up well through regular use. If you're looking for a convenient way to upgrade from manual watering to an in-ground sprinkler system, this kit is an excellent choice. I would definitely recommend it.

This had proven to be a very effective and fairly inexpensive way to add a sprinkler system to my lawn. I use this with a faucet timer. This is my third year of using this product and I am very happy

did exactly what i needed it to do. works great.

Colis reçu dans les délais. Tout est compris dans le kit et après quelques petits réglages, tout fonctionne parfaitement. Même avec une pompe sans un débit de fou, les arroseurs couvrent l'ensemble de mon petit jardin. A voir pour la fiabilité dans le temps.