360° Swivel Steel Support Pole Mount, 28 Inch Large Slide Out Keyboard Tray, Under Desk Drawer & Desk Extender, Height Adjustable Ergonomic Tilt, Black

Installed using the extenders. No problem. Enough choice of location to mount all 4. Mat/cover is trash. Too floppy. Wrist pad is hard, teaches you not to rest too heavily I suppose. Squeaks a bit during use as weight is transferred via wrists. I assume a bit of grease will fix this when it annoys me enough. Big wheel for loose/tighten is a bit cumbersome (imo not ‘elegant’ as described) but is functional. Lock in place is fine, tilt lock is fine. Forward/backward slide is held by friction. So far so good, after one week. Board is wide enough for trackpad, keyboard and separate number pad. Board is NOT CARBON FIBRE. Board is compressed wood fibre with a sticker/lamination to make it look like carbon fibre. Do not spill anything! Board is NOT THE DESCRIBED DIMENSIONS. Is not 72 x 46.5cm. Actual size is 72x25cm. I will not be sending this back unless it breaks. Totally solves my space issue.

Pros -Frees up desk space and drops the keyboard and mouse if your desk is too high to be comfortable -Matches most carbon themed desks perfectly -Adjustable enough to find a sweet spot (If you can get over the unnecessarily large knob) -Sturdy as heck (it does have wobble but you get used to it and when it gets a little knock, just the tray wobbles and not the whole desk) -I've seen complaints about the sliding mechanism but it honestly does not cause me any issues and I have to slide it in and out all the time to get in and out of my chair. Yes it would be nicer and smoother on ball bearings but it doesn't keep me up at night. Cons -I miss my right kneecap. Whether or not I sit cross legged, the adjustment knob is just too big and obnoxious and I am constantly battering my knee on it. It also does restrict my options for it's placement. I've seen people mod it but I've just learnt to live without my right knee cap ever being the same. -The wrist rest is awful, it's too thick and rock solid. I took it straight off and used it as a doorstop. However now I can see the fixing holes all the time -MY BIGGEST GRIPE - Once you take off the wrist rest, the mouse mat doesn't fit flush. A second option included would have been great because good luck to anyone trying to find a nice mouse mat that will fill this tray. It's odd size and shape make it impossible. Plus the mouse mat slides around if you don't find a solution to fix it in place. I sit at night fantasy shopping for pretty RBG mousepads that I can never have. I'd even give Eureka my money for a new one.

When it comes to adjustable under desk keyboard mounts there is not a lot of choice out there (that are held securely with screws and not a c-clamp hand tighten), from the few I found online this is the only one that would suit my needs for the standing desk I have which has a thick metal bar/rail (as shown in image) along the middle underside, this keyboard tray comes with brackets which can be mounted to the sliding mechanism at various positions to bridge over the bar/rail (other brands sold these separately). My bar is roughly around 2" and this bridged over it easily with a little room to spare. I have a full sized keyboard/numpad with a trackball mouse and this is ample room for this setup but If you use a optical/mechanical mouse (why are you still using a mechanical mouse?) with a full sized keyboard then I think the movement of your mouse will be restricted. It has height/side/tilt and rotational adjustments for nearly all requirements and doesn't excessively hang down to much when pushed in under desk even with the bracket extenders fitted. At £104.99 (at time of purchase) I was sceptical about buying this as it seemed very expensive but as it had all the features I needed (height/side adjustable, drop brackets, keyboard length) I went ahead and am really glad I did.

I bought this to drop the keyboard and mouse down to a comfortable height. It does this perfectly and allows me to adjust the height on the fly for gaming / typing. The tray does flex a little, which in hind site is to be expected. All things considered I'd expect more flex than there is. The brackets that are supplied allow for a good amount of customisation for locating the tray on the EUREKA ERGONOMIC Gaming Desk 112×60 cm RGB Gaming Table with LED Light P44 Computer Desk, as the table support bars are in the centre I used the desk C, configuration for mounting. I was also surprised by the quality of the screwdriver that was supplied.

It is very strong and moves i to alot of places but it's very wobbly if it was 49.99 I'd be happier with it but alot of money for what it is

The self-tapping screws needed a bit of pressure to get started, but once fitted, this is a solid piece of kit. I’ve been using it for over two years now, and it’s still sturdy and reliable. It adjusts easily to find the most comfortable position and slides away neatly when not in use, keeping my desk tidy. A great addition to any home office setup!

Needed something to use on a Xrocker table to sit the keyboard on - and this fits the bill nicely. Installed using the stand off legs - so only attached using 8 screws - but seems to be sturdy enough. The stand offs are large enough to locate the sliding mechanism clear of the table frame. To assist used some gorilla tape under the mounting feet. Good amount of adjustment - the only criticism being the slide mechanism - which is comprised of 4 x nylon blocks in a channel as opposed to rollers - and a little stiff. The plus side of this though is once pulled out and adjusted left/right up/down it remains in position. Nice firm wrist rest, and also comes with a mat to cover the complete tray. I have seen criticism of the mat - in that it can stretch or move - but I haven't experienced any issues to date.

It took me quite a few hours to set it up. I have a standing desk and thankfully it fits. If you use a rollermouse red, there is a little hump on the keyboard pad so this may get in the way. The videos online showing how to set it up are inaccurate, the instructions have no text.

Super. Auch alleine einfach zusammen- und anzubauen. Ziemlich schwer das Teil hat über 7 kg also stabil. Leicht ausziehbar, fraglich ist nur wie lange die Kunststoffführung halten. LG :)

The good: * Sturdy * Extra wide and can have a Logitech G613 gaming keyboard with enough space left for my mouse. * wrist rest is nice and firm The bad: * the slider mechanism (or a lack of) is terrible. once assembled,it's difficult to pull the tray out or push it in. this is because id doesn't actually run on a ballbearing slider mechanism. it's just metal on a metal rail so with the weight of your hands, keyboard, mouse and weight of the tray it makes it difficult to slide it in and out. I'm still keeping it as it's really wide and I can deal with difficulty in pushing or pulling but others might be put off by it.

This tray is fantastic. I would buy it again in a heartbeat. I just don't think that i'll get to that point. I'll go into a bit more detail. Comfort: This tray is very comfortable. It is very easy to adjust. Adjusting this tray is all done via one knob, which is located under the tray. This knob is the only problem that i have with this tray. This knob allows for the entire tray to be adjusted to fit your needs, which is incredibly simple to use. The problem is not with the ease of use, it's with the location. When i slide this tray over my lap and then i slide my body under the tray, this knob resides exactly where my knee wants to be. Disregarding this unfortunate placement, this tray is extremely comfortable, and even offers some limited negative tilt (which i prefer)! At first, i was concerned by the method that the tray slides back and forth, which is just some sliding plastic on metal rails. After using it for a while, it occurred to me that the design was simple on purpose. It is not easy to slide, which keeps the tray in place without requiring a locking mechanism. This allows me to slide the tray in and out without adjusting any knob, but also keeps the tray in place unless i want to move the tray! Sturdiness: This tray is very sturdy. I am the kind of person that leans on the keyboard and slams on the keys (from learning to type on a typewriter), and this tray doesn't even budge when i type on it. It feels like i'm typing on a desk! It allows for multiple movements, which do not affect the sturdiness of the tray. This tray is incredibly sturdy. I speak about how i mounted it in the next paragraph. Easy To Install: This entire tray was not difficult to install. The tray arm assembly can come out of the rail itself, which makes installing the rail underneath very simple. I installed this using the standoffs, as i have a very complicated situation on the underside of my desk. There are actually more orientations under the desk than are advertised, as there are extra holes in the rail! this made it so the very limited space that i had under my desk could be effectively utilized. I would recommend pre-drilling some pilot holes in your desk to ensure that assembly is easier, but other than that this was a breeze.

Stra consigliato per scrivania ... A scomparsa.... Io lo uso per una masterkeyboards midi in Green Garage estudio. Robusto!

This product was purchased with some caution. However, it comes packaged with extra braces and screws for different types of desks. I was hesitant and concerned it would not fit my Sit Stand desk as it has a massive mount in the middle with the powerpack. This suits it perfect, and it holds a lot of weight at 3kg and is big enough for an extra large keyboard and large ergonomic trackball. I love how it fits, and it easily slides under my desk. The only negative drawback is that the twist lock is rather tight and springs up very quickly and if you are too slow you can get your fingers caught in the top. i just gently hold the front of the table and I can adjust it quickly.