Replacement Earpads Ear Pads Ear Cushions for Sennheiser HD465 HD485 HD435 HD415 ATH-PR05 ATH-T22 ATH-T44 ATH-T3 Headphones

First off, unless you use double stick-tape or glue to hold these to the headphones, you'll need to re-use the plastic ring from the old set of ear pads. These do fit the HD485 but you'll need to do a little cutting to make them stay on. The material that wraps around the backside extends too far, it completely covers the plastic ring (and then some) and prevents the little plastic clips from properly grabbing the plastic ring which is what holds the pads in place. I had to trim back that material, exposing the inside edge of the plastic ring and giving the clips something to grab onto.I was a concerned at first because there's stitching around the inside edge of that material (that I had to cut away) and I thought, without the stitches, these might completely fall apart but it was fine. As long as you leave a little material wrapped around the edge of the plastic ring it'll be sandwiched between the ring and the headphones and hold in place.

I was apprehensive about these as some of the other reviews mentioned having to trim the "leatherette" earpiece to get the new pad to fit onto the earpiece. Before trimming I tried to put them on and they went on perfect. I YouTubed the instructions to replace the ear pads and found the official Sennheiser instructions.Literally a 3 minute job to take the old ones off and install the new ones.Very comfortable, don't know how long they will last as I've only had them a couple of weeks.

Either I was sent the wrong item or the description is wrong. The pair that I received did not come even close to fitting the ATH-T22 headphones -- which is too bad because they seem like a pretty good quality. They are soft and seem like they'd be comfortable.

I have a pair of Sennheiser HD485 headphones. A common problem with 485s is that the cloth earpads that come on the headphones tend to get really flat over the years. Mine got so flat that I couldn't even wear the headphones anymore.These replacement pads fit the HD485s flawlessly. They are nicely firm but not at all hard. They are very comfortable. They are absolutely a suitable replacement in both fit and quality.Because these are vinyl (instead of the original cloth), they can get a little warm, but it's hardly an issue.

I was a bit hesitant about buying an off brand replacement for my Sennheiser headphones, but these are great. My old ear pads had all but dissolved after about 10-years of regular, 5-days a week use. These new ones are pretty comfortable and seem to be of good quality. Just pull out the plastic rings from your old ear pads and pop them into these and then install.

So I have big ears. They usually don't fit in phones like these so I bought the flat/pad type on purpose. I can see why the doughnut/cone shaped ones are popular. This is a massive improvement over the factory configuration and large enough inside hole to fit my giant dumbo ears. They seal off better so ambient noise will not disrupt as much, but makes the sound coming from the headphones better, with deeper bass. I hope they last as long as the first set did for me!The ring from the old pad type ones needs inserted in these new pads. If your ring is cracked or ruined, this wont fix you.

The description is incorrect. These DO NOT fit the ATH-T22. They are too small.

These fit and look perfect. They provide more padding than the originals ever did.