Thermalright Peerless Assassin 120 SE ARGB CPU Air Cooler,6 Heat Pipes CPU Cooler, Dual TL-C12C-S PWM Fan, Aluminium Heatsink Cover,AGHP Technology,for AMD AM4/AM5/Intel LGA1700/115X/1155/1200/1851

I’ve been really happy with this CPU cooler. The installation was straightforward, and the instructions were easy enough to follow. It keeps my CPU running much cooler than the stock cooler, even while gaming, and the fans are surprisingly quiet. The ARGB lighting looks great and was easy to sync with my motherboard, giving my PC a much cleaner look. The build quality feels solid, and the included mounting hardware made the installation secure. For the price, it’s hard to beat. It performs like a much more expensive cooler while staying quiet and looking great. I’d definitely recommend it to anyone looking for an affordable air cooler with excellent cooling performance.

Very good gpu cooler, pretty big so make sure it’s compatible with your case, and also make sure your ram is low profile or at least not big to the point where it will have constraint issues, I paired it with the patriot venom 32 gb ddr5 6000mhz cl 30 and it just barely fit, but it was good, the argb was very good, looks great, assembly wasn’t bad but the heat sink is a bit annoying, some cpu coolers have a cover over it so that you don’t scrape your hands over the heat sink when trying to put the fans on, but for the price it’s expected, performs great, keeps my components cool on idle at about 30 Celsius, never goes above 50-60 Celsius at full utilization.

First off let me start by saying I have built computers before, but am by no means a computer expert. I spent 2 years trying to figure out why my PC experienced so much stuttering and low performance in some games. I bought new GPU's, new CPU's, more RAM, and still the same performance issues. One day I decided to check my temps and noticed they seemed to REALLY high in some games, and almost seem to correlate with drops in performance. That's when I did some research and learned that CPU's tend to throttle themselves when temps are too hot. I bought this hoping it would drop my temps and holy mother of god - it's like I'm gaming on an entirely different set up. The air flow is insane. It dropped my temps by about 10-15 degrees at least. Every game I played was running so much more smoothly and could be ran at higher graphic presets without stuttering or major frame lag. The fan itself is pretty large so make sure you're not putting it in a tiny case, but man its SO worth the price. Installation was pretty simple if you know your way around the inside of a computer. As for noise, I can't hear it at all, its very quiet. I could not recommend a product more if you're experiencing issues with CPU high temps. save yourself the money and hassle of expensive cooling set ups and try this first.

I was afraid of this beast that it would crush my cpu, but it was easy and keeps it WAY COOLER than my previous Ryzen, and takes all the stress out of the process, no pun intended. I used to burn it up now it's not a concern unless I am rendering then I see the cpu get throttled. The sliders for my cores were all maxed out. But I am really happy with it as this is expected behavior when rendering 3d. Installs easy and level of comfort good! Oh it's quiet too. And the RGB looks sick!

Keeps my i7 very cool. 25 to 27° C idling & plenty of headroom under load. Cheap but very effective cooler. Installation was tricky due to it being awkward to get paste on because of it's size & shoe. Also screws have to be turned a lot before contact so you have to screw fast to keep the paste from getting tacky. Was certainly doable though. Fans are very quiet, especially at idle. Downside is it's big, very big. You need small memory or you'd have to put a fan on the back side to use bigger memory sticks. Maybe not for a novice but worth a shot.

Nice well built CPU cooler. The ad didn't indicate the CPU power limits, but with two 120mm fans it should handle 150W. Easy install, but I don't like the fan wire clip attachments, used a different method that didn't dent up the fins as bad and more secure. Highly recommended.

I recently installed the Peerless Assassin 120 SE ARGB in my build and I’m extremely pleased with the results. A few highlight points: With 6 heat-pipes and a dual-tower heatsink, this cooler handles high thermal loads surprisingly well for the price. It supports both Intel (LGA 115x/1200/1700) and AMD (AM4/AM5) sockets out of the box — easy to integrate into different systems. It is impressively quiet. According to the official spec the noise level tops out at ~25.6 dBA, which means minimal fan noise in daily use. The ARGB lighting is a nice bonus for anyone who cares about aesthetics, and it does not seem to compromise performance. My experience in use: Installation was straightforward (with the back-plate and mounting brackets included). After setup I noticed lower idle and load temperatures vs the stock cooler, and the system remained quiet even under sustained load. It also had good clearance around my RAM slots and GPU (always good to check fit in your case). In terms of value vs performance, this cooler really stands out. Minor note: You’ll want to check your case’s CPU cooler clearance, the heatsink is ~155mm tall. Also, if you’re doing extreme overclocking or very high-end CPUs at 300 W+ loads, this may not quite match the very top-tier 280/360mm liquid-coolers, but for most builds it gives excellent bang for the buck. Bottom line: If you’re looking for a high-performance air cooler that doesn’t break the bank, the Peerless Assassin 120 SE ARGB is hard to beat. Highly recommended.

So far so good. Just got it installed and everything runs smoothly. Pretty easy install. Directions are kind of hard to understand but there is many YouTube videos for it.

Reseña del 310824. Para poder instalar es muy útil el video que esta dentro de la descripción del producto. Es un sistema de ventilación grande, en mi caso quedo justo (quizás hasta apretando) las memorias ram, por lo que te recomiendo tener esto en cuenta al momento de armar tu set. Ten en cuenta que debes revisar la posición del cableado a conectar para que te sea mas fácil conectarlo a tu tarjeta madre y que al momento de ensamblar esto te ayudará que los cables no estorben a los ventiladores.

CPU Fan is strong and powerful. Very Quiet which is a key point.

Expensive, but it does the job

Awesome product Just the fans clips are kinda hard to put on Rest setup is really good and fan performs really well

جيد ماشي حاله بس كبير شوي تعبني في التركيب بس راضي عن النتيجه