BETAFPVExpressLRS Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone

This device was easy to setup through the ELRS Configurator application over the integrated WIFI. Connects quickly with my Radiomaster Zorro, and works great with an Arduino over UART.

My first foray into ELRS. cool. So tiny.

Spent almost an hour soldering, testing ports 1 through 5 in betaflight then desoldering and swapping tx/rx and uarts 1,3 and 5. Finally left it on 5 as t motor showed for the f7 hd and just kept trying to get it into bind mode. My mistake was waiting for the blue light on RX to come on before disconnecting/reconnecting power. You cannot wait on my flight controller, not sure why but connecting and disconnecting 3 times fast did it for me. If you get regular flashes then it's not in bind mode. You will know the "double flash" when you see it. Mine came with 2.4 firmware while my tx(zorro elrs built in) is still on 2.3 yet it bound just fine. Also, if you wait long enough out of bind mode it will automatically enter a fast flash indicating the wifi Hotspot mode is active and you can connect a d enter your router info there(be sure to enter 2.4ghz info not router 5ghz info).

Great, but expensive compared to others

Lasership should put very light packages in the mailbox

Warning, do not buy these things, do not buy anything from beta fpv because it will never last unless it's just going to be a wall hanger! go to a more reputable company that doesn't make things that regularly go bad under normal use! I'm done with beta fpv, one of these light receivers with the flat antenna destroyed my $120 aio fc.... So I've bought about 15 of the Nano receivers from betafpv, and they work great when they're working, I did have one of the first eight of them go bad with about 10 minutes of use on it, but three of the past five that I got have been no good so i stopped getting them, I've had five of these lite receivers and I haven't had the ones with the ceramic tower die but the tower eventually will break on light to hard impacts, the antenna will just fall off I've had three of those do that and then I solder a short piece of wire on and they seem to work good if not better than new. Do not buy the flat antenna, I've bought two of these flat antenna ones and both of them have failed and when they fail they short out the 5v and kill your flight controller, one lasted about two flights and the other died while i was setting up the flight controller before i even got around to flashing the firmware, beside the range is terrible.... Everything I have bought from beta fpv has died at some point or another and usually not at my fault.

The standard for ELRS isn't easy to understand, but when you've learned it, getting this set up is a breeze. I have a few more set aside for future projects.

Takes a little bit of setup, youtube helps a lot. Once setup pretty easy to use. Works great so far👍

Meine 1S Tiny Whoop drone hat mit diesem Modul eine unglaublich Reichweite.

snel geleverd en dit artikel is wat ik wou

Nonostante la piccola antenna in ceramica, il modulo elrs performa veramente bene. Dandovi la possibilità di coprire anche kilometri con un setup corretto ed una buona radio. Consigliato!

Es muy pequeño para el alcance que tiene

Es una pasasa lo pequeño que es. Perfecto para montajes que esten muy apurados de espacio