3 Pack Concrete Mold Silicone Planter Mold for Cement Pot DIY Succulent Pot

Excelente producto, muy buenos moldes

Absolutely love these molds! They make such cute little succulent pots! The molds themselves are really sturdy as well, especially due to the provided inserts. One thing to watch out for though, I used epoxy resin with these and in my experience with them, they had a tendency to flash cure (not sure why, as the same batch of resin didn't flash cure in my other molds, but only in these ones!). This isn't necessarily a bad thing in my opinion, just be mindful of your pours to avoid bubbles, and work quickly!!

These are amazing! I would have given 5 stars if only there had been instructions. Here is how I did mine: What you need: -Quickcrete -Water -Bucket you can destroy -Stick to mix concrete -Paper towels -Olive oil -Strainer to sift out rocks from quickcrete—this is optional but will make a nicer final product. -A cup or cup measurer -Mask (use when handling dry concrete) -Molds (silicone goes inside hard one) -Little glue sticks which come w your purchase for drain holes if you want to make drain holes 1. Oil the outside of the silicone mold 2. Put your mask on the. Scoop about 4 cups quickcrete into bucket. Strain out rocks if you wish. 3. Add about 3/4-1 cup water to bucket to start and mix with your stick. Add more water as needed to make a slurry. 4. Pour slurry into your silicone mold until concrete slurry is to the top 5. Tap the sides with a stick to get the bubbles to come up. Tap tap tap!! 6. Put your drain hole sticks in if you want them. 7. Let set. (I put leaves on the bottom of mine after about 10 min—not necessary) 8. Wait 12-24 hours you can peel off the silicone and remove the little drain hole sticks. You may have to finish opening the drain holes with a thin tool (it is easy). Voila!!!

Makes very cute little pots with easy.

Es la primera vez que utilizo moldes para trabajar concreto y me encantó les paso mi resultado.

I did not like how thin the product was. I purchased to use as a concrete mold and felt the molds would not of held the mold in place

Such a fun little project. I used the quick crete 5000. Mixed it in an old peanut butter container and pour it in. Let it set for 24 hours and it makes perfect little pots. The silicone is very soft and peels off easily. Concrete didn't stick to it at all. Definitely recommend.

These molds are pretty good. I did have to separate the square and circle molds to make handling easier. So far I have no complaints and will more than likely be ordering another set to double my output!

معها اوعيه بلاستيكيه تساعد على حفظ شكل وحجم المنتج وحجمها رائع