POWERTEC Sawhorse Brackets, Set of 2 Saw Horse Brackets w/ 500Lbs Capacity, Heavy Duty Brackets for Use with 2x4 Lumber, Construction Tools for Carpenter, Contractors (71026)

I had to replace 6 old sawhorses I made some 20+ years ago as they were rotted and wiggly beyond safety. I remember it taking days to measure/cut/grind/file/drill/hammer and then scrap and start over when I first made then. Those were my formative years. Now, much older and semi-smarter, I bought these as a shortcut method. I was very surprised how much easier it was to make these. No more angle cuts and wedgy braces that split and creak. With just a few simple 90 degree cuts and some holes drilled in the top runners, these things bolted together so well there wasn't any play wiggle. You can really tighten them down to make very rigid, solid supports that scream with stability. The durable plastic braces are very stout and made with good quality resin that does not creak or crack.With the time saved, I was able to prime and paint all the pressure treated wood pieces to make for the absolute most weather resistant sawhorses you could ask for. In the state of Washington, everything outside rots in just two seasons of winter, except for my super sawhorses! They are so durable now that I'm including them in my Will!

I started a project to build a pergola but don't have a lot of storage. I wanted something that I could use hat would be strong but I could "knock down" when no longer needed. These are super strong, easy to set up, can be used with different sized top boards, (I used 2x6's for the top) and 2x4 for legs. The only change I would add to the directions is to cut the bottom legs at an angle so the set flat on the floor. Maybe the original plan would be better on dirt. Highly recommend

I bought these brackets to make sawhorses to support my pickup camper in storage. They needed to be sturdy. With these brackets, they are very sturdy. The only reason for not rating them 5 star is that I used a 4x4 top cross beam and the bolts only work for 2by material. I had to countersink the bolts pretty deeply. But it works fine. Overall- good product.

It had been a long time since I needed a good set of sawhorses for some around-the home projects. These fit the bill very nicely. They are strong and have held up well. They were easy to assemble and, if necessary, can be taken apart rather easily for storage. Getting 2x6s for the top pieces was also a plus but they can also work with good old 2x4s. I must say that it took a bit of fiddling to get them properly aligned but once that was done, they have worked well for me.YES, I would recommend the purchase of these if one needed some good sawhorses.

Very happy with these. good design, sturdy. easy to assemble and disassemble.

These are great if you want horses that have a bigger top. I used some old deck planking to have a couple of horses that were a bit wider than the standard 2x4. Super easy to put together and they seem pretty sturdy. I've dropped plywood onto the horses and they don't seem to loosen up one bit.

For making quick and dirty sawhorses and benches, these are great.

I bought these because they were convenient and had the potential of being easy to take apart and stored. A problem I've encountered is that when the 2x4s dry out, they shrink so much that the clamps no longer hold -no matter how tight you make them. They bottom out and the legs become unstable and can slide right out when completely tighted down.

Needed to set up a temp grow light. Used these with extra long legs. Worked great for the purpose I bought them for. Haven't put any real weight on them but seem sturdy. I also have metal saw horses so keeping these for temp set ups.