Puduo Epoxy Resin Clear Kit 64 OZ

Very good and easy to work with.

I love this epoxy resin! It’s easy to mix, crystal clear, and works great for DIY projects and resin art. It cures beautifully with minimal bubbles. Highly recommended!

I purchased this Puduo Epoxy Resin Kit for small DIY projects and coating surfaces, and I’ve been very happy with the results so far. I’ve used it on a few pours and a tabletop project, and it mixed smoothly with no issues. The 1:1 ratio makes measuring easy, and once mixed, the resin levels well and cures clear with a nice glossy finish. I didn’t notice excessive bubbles, and any that did appear were easy to remove with light heat. Cure time was consistent with the instructions. One small downside is that you need to mix carefully and thoroughly to avoid soft spots, but that’s typical with epoxy and not unique to this brand. Overall, this feels like a solid, reliable resin at a good value. I’d recommend it for beginners and experienced DIYers alike.

Good product but be prepared for a sticky mess. Use only in your garage on cardboard with gloves on. It's so thick in my 50 degree garage that it doesn't pump well at all. I have to unscrew the top and let drizzle in the cup. Make sure you get it mixed right or it will just stay sticky for days. It also takes a long time to dry hard, like 48 hours in 50 degree conditions. Maybe it would pump and dry better in 80 degree conditions I don't know. If you heat gun it while drying you'll get the air bubbles out. It does dry very hard and looks crystal clear when done right. I use it for cedar wood projects and it has turned out well filling holes in wood and even turned out well in areas where I had to sand and apply stain again after using the epoxy on the wood

This was used by me as a first time project with Epoxy. I followed the instructions and measured to the line I needed for the mix. The project came out perfect. When mixing follow the instructions take your time. Lay everything out before. Stir slow a good while the drying time is long enough to work. I put the containers in very hot water prior and poured in an 80 degree room. Little fumes. I embossed flag on a border serving tray.

I am a new user to the hobby of making jewelry and other objects by using Epoxy Resins. I used this 2 part epoxy right away when it was delivered. I mixed up a batch of 100 ml, which is large enough to make a small pyramid, several geometric shapes and small molds of jewelry of various shapes. The mixture itself took about 4 minutes to stir and I could see that all the air bubbles were out and the mixture looked very clear in the silicone cup that I was using. I then split the mixture into 4 smaller cups so that I could add either a power color or a liquid ink color. After a little stirring I proceeded to fill the molds. This was all an experiment for me. I am learning about how to fill the molds and try colors out. I mixed some of the colors in some of the larger molds to see how they would blend or look next to each other. The epoxy mixture poured great. It flowed evenly to fill each mold. I had to learn to slow down as some of the smaller molds overflowed a it. When the pouring was done I had to let them solidify overnight. I looked at the molds the next day. Everything solidified within 12 hours, probably cause the molds were so small. Every item turned out great. The epoxy was great and easy to use. Clean up of the expos was easy because I used all silicon cups and a lot of disposable stir sticks and I was careful not to be messy. Using this epoxy Mx was great and I recommend it to all users, new and more experienced users.

I love this resin! It's perfect for small projects. I got it to create a pressed flower phone case, and have also bought other molds on amazon for making key chains and coasters. I included pictures of my projects thus far. It's my first time working with epoxy resin and this kit is GREAT for beginners! It includes popsicle sticks, plastic measuring/mixing cups, and the resin. My ratio was definitely a little off for my first project of the phone case/key chains, but it seems to be quite forgiving because it still cured perfectly. I was worried it would remain sticky and not cure because I was off, but it still worked like a dream. Follow the instructions-- they are so helpful! I liked their tip of placing the cup in hot water before pouring, as the heat will get rid of any bubbles that remain and will make the texture much more liquidy and easier to pour. It's a very thick/viscous texture otherwise. As other reviewers mentioned, the resin will remain quite flexible even after curing about 6-8 hours. This is nice if you want to adjust or bend, but personally, I recommend you don't take your projects out of the molds for at least the full 24-48 hours if you don't want them to bend. After the full 24-48 hours it becomes rock hard and looks great! Cures quickly and looks super clear. Also works well with mica powder, which I experimented with in my coaster. Beautiful! My old complaint is that if you want to pour from the cups onto small projects (like a phone case), it's much easier to work with a measuring cup that has a point or lip, or isn't just completely cylindrical? It makes a mess. Remember, make sure you wear gloves, wear a mask, and work in a well-ventilated space (with a fan if possible too!)

I was initially hesitant about the pump system, but it actually worked very well. As long as the pumps were capped after use, they did not clog or slow down, and they made measuring the resin much easier and more consistent. My main issue with this epoxy is the amount of bubbles. I experienced a large number of small bubbles during mixing and pouring, as well as an unexpected number of larger bubbles. Some bubbles were still visible even after curing. While it wasn’t catastrophic, it was noticeably more than I’m used to and required extra effort to manage. Curing time also took significantly longer compared to my previous resin brand, which slowed down my workflow. Because of the bubble issue and longer cure time, I’ll likely be trying other epoxy resin brands for now rather than sticking with this one. I do suspect the pumps may be contributing to the bubbles, so I plan to test the resin again without them before fully ruling it out. Overall, the pumps are a strong feature, but the bubble formation and cure time make this resin less ideal for my current needs.

This is by far the best resin I have used. I have tried several different brands and with all of them I have really struggled with hundreds of tiny bubbles which have ruined my projects. I make resin jewellery items, ie pendants, earrings, bangles etc, and small dioramas of the ocean using plastic toy sea creatures and tinted resin. This resin is smooth to mix, easy to pour and has no bubbles in it at all. It's fantastic quality. I have made several pairs of earrings this week since ordering this and they have all come out super clear and completely bubble-free. I can't praise this enough. I will be sticking to this brand from now on and definitely buying more. When I have used other brands of resin, even if I mixed it really carefully, heated it up and poured gently, I still had tons of bubbles in my projects - but this brand is clearly much better quality because the bubbles are virtually non existent. Love it!!

Just love this resin to bits bubbles self raise and burst,clear,easy mix , just amazing for smaller projects 😊

Crystal clear resin. Beginner to epoxy resin & love this product. Easy to use. 1:1. The best. Fast delivery ✅

كان نفسي استخدمه زجاجة جت نصها ناقصة والتانية مليانة 🥹🥹🥹

amazing but the amount is enough for one project hope it comes with a bigger size