SWIMLINE HYDROTOOLS Complete Sand Filter System, 12" Tank - for Above-Ground Pools Up to 8,000 Gallons, Single Speed Pump, 0.3 THP, 1,980 GPH, 4-Way Multi-Port Valve, 42 lb Capacity

I bought this sand filter and pump combo a couple of years ago for my little 1100 gal pool. It did a FANTASTIC job keeping the pool clean compared with the glorified fish tank pump that came with the pool. In my case, I was not able to remove the old pump from the bottom of the skimmer, so I instead pulled the impeller out of the pump and installed this between the old pump and the pool return. It works perfectly for my purpose but it would probably move even more water without the old pump in between. Anyway, this set up is great.Note to anyone that needs it: I did not bring it in for the winter and that was a mistake. The pump didn’t work when I tried it again early this summer. But with the help of some YouTube videos, I learned that if you pop the back cover off the pump, you can turn the impeller, breaking it free to spin again. It worked for me and it has been going all summer once again (knock on wood).

We have had small above ground pools for over 20 years but this is the first sand filter we have owned and used. Why did I not get one before?! This thing is fabulous! Our pool is literally SPARKLING clean - I have have never seen the water looking so good. We have a 18' pool and it handles that size without problem. The pump is fairly quiet - you can hear it running but not annoyingly. Ran great as soon as I set it up. It came with extra tubing and most everything you need. You will need o ring lube and possibly different tubing depending on your setup. The biggest downfall is the directions are not great when it gets to telling you which tubes to hook where. The directions are fine for putting the sand filter together but I found I had to do some searching of other peoples photos to see how to connect hoses thus I am including some photos of hose setup to help you out in case you get on the struggle bus like me (I have a bus pass). The plugs are plastic (as are 99.999% of everything made nowadays...ugh) so you have to use some care when tightening but nothing that would keep me from buying - just keep it under Hulk level and you should be fine. Directions were alittle lacking on when to backwash the filter but with alittle Googling I was able to make sense of the directions (pressure increase above starting pressure - time to backwash). All in all, a very nice, very affordable sand filter.

Does this product really work!?!? Yes, it does! And VERY well.To start it's powerful! The suc5ion is wonderful and it cleans my 12x20ft oblong above ground Coleman pool in about 2-3 hours giver or take how much cleaning needs to be done. This is even with the skimmer basket attached. Another big plus is that it comes with all the needed hoses clamps and tools necessary. Instruction aren't super clear but assembly is straight forward.However here what I think you should know.1. there does happen to be a leak that occurs when connecting the hose to the "pool" opening as noted on the pump lever. It's a drip but a leak nonetheless.2. The sand comes separately3. Make sure you have the pump/filter placed EXACTLY where you wanted before filling with the pool filter sand.4. I recommend using a cup to scoop sand slowly. Pouring the sand will cause alignment issues. (You'll know what I mean when you read the instructions.)But overall besides those miniscule hassles definitely worth it. Although I'm NOT looking forward to putting this thing away for the winter. It's HEAVY. Again miniscule and still worth the buy

We have a square best way 10 foot by 6 foot 3 foot deep pool. We had some pretty crappy weather here in Pennsylvania in the month of June. The pool was covered a lot with a tarp because we had a lot of 70s temperatures with a lot of rain. When we went to take the cover off of the pool, the one day, the water smelled, was aqua colored, and mosquito larva had infested it swimming all around. It was gross and the pool was unswimmable. We went that day and got pool chemicals and doused the water and bugs. Chlorine, shock, and algicide. We had an upgraded larger paper filter, filter on our pool. (Also bought from Amazon) After days of having it running and putting the chemicals in the pool it still was not clean or clear. It turned more bluish, but you could not see through it all and it still smelled like a pond. We then went and got clarifier. We ended up putting clarifier in the pool two different times because the pool still was not clear and looked milky and foggy. We thought we were going to end up having to drain the pool after a few weeks of not being able to get it back to normal. We kept adding chlorine every couple of days to try to correct the smelly aqua tinted water. Although all the bugs eventually did die and disappear. My daughter was upset because I wouldn't let her swim in it. Lol We needed a solution. I started searching online for a solution and read that we may need a stronger, pool filter or a sand filter, and that the water may not be getting enough filtration or circulation. I came onto Amazon and bought this sand filter. It took my husband a couple of hours to get it hooked up properly and put together. We let it run all night and checked the pool the very next morning and it was already 1000 times better. The next day after that the pool was blue and clear again!! Finally swimable!! had went through so many headaches within about three weeks to try to get our pool back to normal and apparently all we had to do was buy a small sand filter. It has been working perfect, and has a great amount of power for our pool. If something ends up happening with it, I will update my review but so far it has been great for us!! Picture attached is after leaving it run just for one night! Last photo is what we originally had on our pool.