Extra Long Arm Full Motion TV Wall Mount for 42–80” TVs

This is a super heavy duty television mount! It is wonderful quality and I can move my eighty six inch television very, very easily, all by myself in several different positions! My friend who put it up Puts these in for a living.So it was quite easy for him to install. The adjustability and angles I can get from this thing is impressive to say the least. I really wish I had the ability to get the television further into the wall so it didn't stick out quite so much, it is large. But for me it was worth it! I've had it on about six months now with no issues.

Great structure and durability this is totally worth your money! Installation and instructions were clear and easy to assemble.

I should have written a review for this wall mount a year ago. I needed an articulating wall mount for a 65 inch TV with the possibility of expanding to a larger on in the future. No big ask. There are hundreds of these things out there. The issue is that I needed it to turn a full 90 degrees and be able to hold the weight without showing weakness. After a lot of research, I found this one and boy, am I glad I did! It's great and it does what it does very well. It's strong and easy to manage.

Bought this for our 65" OLED and love it. We turn it every night during dinner and it does the job, and is easy to push back and forth. Installation was pretty easy, but it's beefy so it helps to have a couple hands.

I used this to mount a 55" LCD TV in our subdivision's clubhouse. The two pictures show the range of motion the mount provides. It can be used against the wall for small board meetings and swung out when there are larger audiences. All hardware was provided, although I chose to use a heavier duty lag screw to get into the studs. The bolts provided would be just fine for residential use. But in a public place, it could be subject to rougher use. I like the Spax brand of lag screw. Expensive, but substantially heavier duty. When finished installing the mount, I extended the arms all the way and hung on it. That is more than it is rated at, and it had minimal flexing. This mount came with a wall template. Figure out where the mount goes, and tape the template to the wall. Pro Tip: Install one lag bolt, making sure the mount does not pivot and scratch the wall. Then level the mount, tighten the one bolt, and use the hole in the mount to drill the second hole. That helps to keep the drill bit from wandering in the drywall. Double check level - drill two more holes, and finish it up. Very important to hit studs. If going into a hollow block wall, use toggle bolts. I like the Togglers brand. If you cannot hit a pair of studs, you should install plywood backing. Fasten the plywood across two studs, use toggles to anchor the mount to the plywood. If going into concrete, use expanding anchors - DO NOT use lead anchors because they are shear only. If there is a gap between the cement wall and the drywall, install washers to fill that gap or use a stop nut. You can crush the drywall against the cement if you don't do this. The installation is easiest with two people, both for the mount itself and setting the TV in place. I will buy another one of these when I upgrade to a larger TV at home.

Heavy duty, or should I say heavy? It supports the large monitor I bought, I ca extend it out from the wall about 3 feet, and turn it side to side, but I cannot adjust the monitor up or down. There is a slight tilt up/down adjustment but is very limited. To move the monitor up or down, I need to drill new holes in my studs. I bought this mount because a have a glass desktop and the stand that came with the monitor is too heavy for the desk.

Very well made. I was worried the TV might droop down once fully extended but that never happened. It’s built like a tank!

It's a bit clunky to go from 1 arm to 2 arm mounts but this product is great. It can go a bit past 90 degree on a 75" TV, I'm guessing that gets down to less than 90 degrees on like a 90+ inch tv. The mount is as heavy as my tv, no creaking or flexing when moving around. And most importantly to me my last mount would sit flat on the wall than have a twist from the weight fully extended this mount does not do that at all. It's centered in the level on the wall and fully extended. Only down side is It's expensive but if you have a 2-3$k tv you want something that's overbuilt and will never drop your tv off the wall. I feel confident this mount will be on the wall through many more tv's with plenty of room to get bigger tv's and heavier. I'm a little iffy on the last picture it's only being held on by 1 point of contact, the bottom screws are for anlge tilt. That being said no problems installing by myself and feels sturdy.

Ordered as it looked great. When pulling the tv forwards it drops a little and looks unstable as if tv too heavy. When pushing back it takes 2 people to lift slightly to get into tv gap

Ich hatte etwas stabiles gesucht um meinen Fernseher seitlich auf 45 grad zum Sofa drehen zu können. Die Installation war kinderleicht. Alte Materialien zum befestigen (Schrauben und Dübel) für alle gängigen Fernseher sind schon dabei! Ich bin sehr zufrieden.

Die Langarm-Fernsehhalterung ist wirklich sehr stabil und perfekt für unseren 65 Zoll Fernseher. Wir nutzen sie häufig, um den Fernseher zu drehen, und sie hält dem problemlos stand. Der Preis von 119 € ist definitiv gerechtfertigt, da die Halterung zuverlässig und gut verarbeitet ist. Eine tolle Lösung, um den Fernseher flexibel zu positionieren!

Love this TV wall mount! Very sturdy and easy to install in a single stud. Holds our older and heavier 37" flat screen securely. Great maneuverability with the extending arm, pan and tilt.

Did you want to watch the tv from anywhere in your house - this is the mount for you! It's super sturdy and heavier than the TV but easy to install and now I can watch it in any direction.