JENOLITE Rust Converter Spray | 500ml | Fast-Acting Epoxy Based Rust Treatment & Inhibitor for Metal | Converts Corrosion into a Stable, Ready-to-Paint Surface

I purchased this product not having used jenolite for many years using another brand instead , i needed a spray as using underneath my car on a project for surface rust ,prepare area with a wire bush and then spray it on ,clinging to rusty metal some drips but that was expected instead use the gel product from jenolite if cling is needing , it dryed well and leaves a black hard finish, that can be primed and painted if needed , its not cheap but its an excellent product for my needs , i will be waiting for a sale and purchaing more without question soon

After a bit of research into what product was best for my needs, I opted for Jenolite Rust Converter Spray. Stone chips had broken through the paint around the arch areas of my campervan, looking unsightly. A quick rub down on the affected area with 80 grit oxide paper back to clean metal, masking tape applied to avoid any overspray, then follow the instructions on the can - shake contents for a few mins, then apply from around 25cms, leave to dry circa 15 mins, then re-apply. It's clear initially, but as it gets to work it turns black, after 2 coats a thick protective layer is formed, after fully dry / cured the epoxy feels tough and has good coverage, I'm letting it fully harden over this week, and will look to apply a top coat of colour matched spray paint, and clear lacquer top coat to blend it in, and will then apply 2 coats of the Jenolite on top of the colour matched spray paint for added protective layer as it is clear. Good product, good performance straight out the tin with minimal prep, instructions are simple to follow.

Good quality spray. Can make metal go black on contact.

Fantastic product. Just take as much rust as you can first. My parts looks like new. Would uses again and recommend to anyone.

This works really good and cleaned up my brake discs and allowed me to paint them very quickly

Great product, and easy to use

i thought my days of getting under a car were over. I had a fiat in the 70's so when the garage told me there was rust underneath my 13 year old mini i decided to act. Jacking the car up using a plank and the kerb i was able to crawl underneath safely and spy out the rusty bits. you should use a wire brush to get rid of the loose bits - which i tried to do where i could reach. Because this stuff is a spray i was able to coat everywhere i could see even if i were spraying through small gaps. Once applied the surface turns silvery. you do need to do 3 coats with at least a 20 minute gap. it does not state the coverage on the tin - i only had a few bits to do - around 1 square m (10 sq feet). i used the bitumen spray to cover after a 2 day wait - the bitumen coverage is much more - i feel i used about 1/4 to 1/3 of that to the whole tin of rust converter. i cannot give this a 5 star rating as the proof of it will be in a couple of years not weeks.

Good gear its a game changer buy it

J'utilisais habituellement un produit concurrent beaucoup plus connu en France. La différence avec celui-ci est que la pellicule reste transparente si vous peignez un support non-oxydé mais elle devient bien noire lorsque vous repeignez un support oxydé. C'est parfait pour mon utilisation où je peux refaire la protection du châssis de mon vieux Dodge sans avoir à le repeindre derrière car il devient noir naturellement.

Follow the directions carefully. Spray OUTSIDE. Prepare to leave whatever you're spraying OUTSIDE for a minimum of 2 days with any sprayed areas OPEN. The fumes will go away, but they are very strong. The warnings on the can make this very clear. I used it to spray rust in the spare tire well in the trunk of my car which didn't rust due to water intrusion ... nooooo - it was mice that made their home in there. Their 'biological leavings' ate through the paint and caused rust. Also applied to other various areas that made light surface rust after sanding in the process of repainting a car. Coats really nicely, had no problem putting an epoxy primer over the top of this stuff (I gave it a week). Worked exactly as advertised. The more work you put into preparing the surface, the better the product will work.

Schnelle lieferung, EXTRA gute qualität !

super produit ! forme une couche de résine qui durcit en séchant. acheté pour couvrir des soudures avant peinture, le rendu est super propre. peut s'appliquer généreusement sur un support horizontal, mais par petites couches sur un support vertical pour éviter les coulures. un petit peu cher certes, mais généralement les produits contenant de l'epoxy ne sont pas donnés .

Spruzzato su ruggine . Tornata lamiera pulita . Copritevi , lo spruzzato sotto il canper me colato 2 gocce sulla spalla, brucia la pelle..