6 Set Drawer Repair Kit, Drawer Support Brackets

Like the title said, I was a little skeptical at first. It was a little challenging to get the right level of tightness, as once the brackets are screwed in you can't adjust. But once I got that figured out, it went in reasonable easy. Once in, it's secure, and certainly fixed the sagging (and dragging) drawer problem. Time will tell if the tightness lasts, but I'm pretty pleased so far. A few quick suggestions: 1. My drawer was pretty saggy, and holds a lot of weight (silverware drawer). One strap probably would not have been enough. Two probably would have, but since I had plenty of straps I put in four, two running front to back and two running side to side. This...made it VERY secure. If you're getting this for a drawer that holds a lot of heavy stuff, I'd definitely recommend running at least two perpendicular straps. But if you really want to send a middle finger to the sagging problem, jam four of them in. 2. If you DO go for the overkill and do four straps--two front to back and two side to side like I did--weave the straps. I found this helped keep all of the straps flatter to the underside of the drawer. 3. One of the ways I found to really get the strap tight was to: 3a. attach one end of the strap to one bracket 3b. screw in that bracket, but not all of the way 3c. attach the other end of the strap to the other bracket, and keep it just shorter than you'd think it should be 3d. get the screws on the second bracket securely into the wood, and then begin pulling back on the bitter end of the second strap, setting up a tension between your fist and the second bracket 3e. screw the second bracket ALL the way in like this 3f. return to the first bracket and screw it the rest of the way in. Voila! Tight as a drum.

Easy to install on weak drawer construction. Screws are very small by design to enable usage under the drawer.

These did a good job at fixing the warp in the back of my drawer, but were challenging to install. The screws are tiny and were tough to get into the wood without a drill or power screw driver. The listing doesn't say that you'll need those tools, but you do.

The Drawer Repair Kit with Drawer Support Brackets was exactly what I needed to fix my drawers with bottoms that kept dropping out, causing a lot of headaches. This repair kit fixed the issue completely, and the brackets have held up perfectly since installation. The drawers are now sturdy and reliable, with no more sagging or falling bottoms. I’m very happy with this purchase and highly recommend it to anyone dealing with similar drawer problems. It’s an easy and effective solution!

Initially I was not impressed, I unboxed it and the black plastic bands, 6 metal pieces slid out with an unzipped bag with 6 additional metal pieces and the 18 tiny screws. NO DIRECTIONS! I had to come back to my Amazon purchase for directions. Screws are not large enough to truly be sturdy but will suffice until I get to the hardware store.

I bought this to fix a set of Ikea Malm drawers. The unit was an older style unit with not support brace under the cardboard drawer bottom so the bottoms eventually collapsed from the weight. These straps solved that. The hook into the front and back of the drawers to keep them from bowing out and allowing the cardboard from being pushed from the track and falling out. The strap itself is a thick plastic and allows some extra support but mainly it is preventing bowing. I feel like purchasing this item has good value for theoney as we were able to extend the life of the furniture which would have been a pain. The installation was easy as well. They fit the IKEA Malm drawers and had good build quality once installed. I like the simple design too. I would purchase again for other drawers if I needed them.

Trash. Doesn't matter how tight you make it, there is still flex in the cables which means your bottom panel will bow still. Also the screws are so small that if you try to make the cable as tight as possible, this applies constant pressure on the little baby screws that they just pop out of the wood. Mine popped immediately. This is a good concept that is poorly executed.

We have an older Ikea Hemnes dresser that has 8 drawers. The newer one we have features some reinforcements, but the older ones develop sagging drawers over time. This worked great to fix the sagging and the drawer is now fixed. Well worth it!

This is an amazing item that I never knew existed until I saw it here on Amazon. Works like a charm to fix any sagging drawer bottom. The bigger size metal fasteners were more useful though. The smaller fasteners are too small as they have to be placed up too high on the thin ledge that most drawers have making the strap sit up too high off the bottom. Wish there was a choice of which size one could buy. Also had to use a different screw that was a bit more robust than the ones provided . But all in all happy with how this set worked. Great product .

Un peu cher pour des ferrures et un bout de sangle en nylon. L'idée paraît intéressante et est facile à mettre en œuvre. A voir dans la durée ...

Works great to prevent the thin drawer bottom from falling out.

First of all, the screws are absolute garbage. They strip super easily so plan to use your own screws to make it much easier. Second, there's no instructions besides the picture for the product so you kind of have to play with it until you figure it out. The people complaining about the strap sagging - you screw in the double screw piece of hardware first, then put the strap through and make the length slightly smaller than the length of the drawer bottom. This way you can get the strap nice and tight because you have to use a little force to get the single screw piece of hardware of the edge, then screw it in If you screw both pieces of hardware in and then try to tighten the strap, you're going to have a bad time. You can't get it tensioned. There's no mention of this in the instructions or other online reviews so I hope this helps

This product had no instructions. It was hard to put together. And it didn't work with my ikea drawers. So I returned it.