EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

Obviously vertical gpu mounts work best when you've got water cooling, but I decided I wanted to go with a horizontal fan look with my Wraith Prism and my EVGA 3080, so I opted for this gpu mount versus using the one built into my Corsair 4000D, as that slams the car right up against the glass.The product is built well. Assembly was actually much easier than it seemed it would be when I first took it out of the box, which for the record the packing was excellent and everything was packaged and insulated well. The riser cable is nice and flexible, although the end that goes into the PCIe slot of the motherboard is a bit too loose at the front end for my taste; had to keep pushing it back in after positioning the gpu, even after flexing the cable as flush against the motherboard as possible.That said, in my Corsair 4000D, with my Wraith cpu cooler, you cannot install the bracket. Period. There's no way of finagling it to get it to mount in the seven slots of the case like it's supposed to, as the gpu pcb and cooler overlap with the cpu cooler by a good solid inch.Regardless, the product is excellent, and given the needed clearance, seems like it would work very well when mounted properly. In my case, I've just got it propped up as flush against the back of the case as I can get it and am leveraging the included support bracket to help it stay in place. With the glass on and sitting at a normal distance, you can't tell anything is amiss.So, good product! Just make sure you take into consideration the necessary overhead clearance for the gpu.

The media could not be loaded. Arrived in great shape, packaged well. Instructions were a bit vague when it came to attaching the gpu, riser, and bracket all together. Since I've seen reviews for a totally different bracket, I want to be clear: this bracket has the logo on top of the lightbar, which seems to be of different design compared to the ones with the ezdiyfab logo on the front of the lightbar. PROBABLY GOOD TO PLUG IN DISPLAY CABLES BEFORE YOU SEAT THE BRACKET IN YOUR CASEPros: -adjustable support bracket -sturdy -adressable rgb works with aura sync -relatively easy install -looks greatCons: -can be a little tricky *patience* -'white' rgb doesn't get too white; you can see blues and purples amongst the LEDs so I had to kind of tune the RAM color to match its ice-bluish color which is still pretty cool

This was a monumental PIA to install. Instructions are terrible and just completely skip over the hardest part which is how the hell do you connect the riser cable to the motherboard once it's installed in the case? The cable is so long and the vertical mount is so close to the mobo that it's impossible to be able to maneuver the cable and connect it. Any of these so-called "guides" on how to do it on youtube of course gloss over any of the difficult parts and say "its so easy".

The media could not be loaded. You need EXACTLY 8" or more clearance between whatever platform your GPU will be sitting on, and anything above it (cpu cooler in my case).This is such a cool mount though!! I had a hard time getting it to install, because it's so weirdly engineered. But it's over engineered, it actually was pretty sturdy! Unfortunately it doesn't fit in my case with my 4080 because my cpu cooler is way too big.

Bought this vertical GPU mount a couple months ago. It was used for my old setup with a 3050 and was easy to install. Then I upgraded to a 4070TI knowing it might not hold the weight but It was able to handle the weigh perfectly and not even slack on my fans on the bottom of my case. The RGB is great and is honestly brighter then most good named RGB accessories. Also, the RGB is available to change through any RGB software.

After a yr of use both ez products that I bought turned yellow. None of my corsair premium fans or strip has faded as these ones.

funciona perfectamente se ajusta y soporta bastante peso, se ve muy bien

Update with a new pic:I'm dropping my rating a couple stars because in less than six months the LEDs went from being a nice bright white to discolored yellow. While I was initially inclined to think, "oh, maybe it's just a little grimy because I like to puff on some herb while I'm gaming", that doesn't appear to be the case here. I took it out and cleaned it thoroughly with no effect, none of the other lights in the system discolored like those did, and if I look closely at the LEDs inside the plastic housing, I can see that only some of them (all but 3) are discolored, so this definitely seems like a QC issue with the LEDs and not smoke damage. I've made no attempt to contact EZDIY for a replacement because I had modified the frame to get it to fit and wouldn't expect they'd replace it (nor do I want another one at this point), so I can't speak to the quality of their customer service, but ultimately, I took the loss and removed it from my system.Original review:So I knew upfront there was a risk that this wouldn't fit in my PC. I was mounting a 3080 on it between 3 Fractal Prisma AL-14 fans and a Noctua NH-U12A air cooler in the full size Fractal Torrent case. Out of the box, it didn't fit, the 3080 was about an inch too tall to fit under the cooler. It's also not the easiest this to put together but once it's together it is pretty solid. When I discovered it wouldn't fit, I looked it over and instead of returning it, decided I'd try to modify it to fit. I was able to drill new holes into the back plate that slots into the PCIe covers, a touch over an inch lower than the factory holes, showing me to attach the GPU bracket lower which got it to fit about as perfectly as it could've and it looks very nice now. My main complaint, or I suppose recommendation to the manufacturer, is that it doesn't just come with multiple sets of mounting holes in the back plate to allow people to adjust the height. As a 3rd party product, it's pretty easy to assume that it won't fit as is in a lot of PC's and having mounting holes at various heights would be just the thing to add the adjustability needed to install it in almost anything and would probably save you money in the long run as people who don't want to make the modification I did would still be able to use it rather than returning it.Tldr: I think it's a great product overall to add some extra flair to your build, but it's not very adjustable so be warned, it may not fit in your build without some modification.