DC 775 Motor 12V-24V 6000-12000RPM 775 Electric Motor Double Ball Bearing High Torque Large Power Low Noise DC Motor with Bracket DIY for Mini Angle Grinder Table Saw Drill Electrical Tools

Good value, good torque, works well.

This motor has two ball bearings, lots of torque and a reasonable current draw. Not all the 75 motors are the same. This one can be controlled by the upgrade 3018 controller on a 5 amp supply. Some motors have one ball bearing and a bushing, others have 2 bushings. This one is quiet with good rpm and good power. 20,000 rpm motors have higher current draw and may push the power supply with a load and should have a separate power supply and it's own controller, running off the 12V pwm output. (the 12V part is important on choosing the controller!)

The motor is nice and powerful, but be warned that when stalled the current can reach up to 20A when operating at 12V, well over the 10A specification.

Works great to replace seadoo spark reverse gate motor. if you have any mechanical ability buy this and fix it yourself, just need a little RTV to reseal and you have saved 1k. Great motor has been working for a year now

This worked well as a replacement in my Sea Doo Spark iBR actuator. Unfortunately, the failed motor wasn't the problem. I think my iBR actuator actually had faulty programming which caused the motor to burn out and fail. At any rate this is the one you want if you want to replace just the motor and not the entire actuator.

This is the motor you need for a Seadoo. Works great.