Tesla Model Y Trunk Partition Noise Baffle -Tesla Noise Reduction Trunk Divider Low Frequency Resonance Noise Reduction Layered Storage Gods Modified Accessories

I ordered this for my late 2022 Model Y performance. Overall it is fine. Very light but seemingly sturdy board. Plastic trim has a lot to be desired. It does not fit the wall perfectly and instructions weird unclear on where it went. I figured it out but one side needed to be trimmed a bit (driver side, passenger side fit fine). I also needed to add my own adhesive. What it comes with was half dried out and not binding. 3M foam adhesive did the trick.Overall fit is good and seems level without too much effort. Holds up weight as noted but that could partly be my added adhesion. Overall a good fit and I’m happy enough with it. It did not come with the table legs as pictured be aware of that. If this cost maybe 25% less I’d fully recommend it. Otherwise I say it is overpriced but still generally a good choice. I like it enough to say that.

The divider itself seems pretty solid. It feels like plywood or particle board with flat felt on the bottom and padding and cloth on the top. The mounting is a little sketchy, however. I'm not sure about the quality of the double sided tape. I think it will be fine after a hot day allows the mounts to soften into shape a little more. The mounts span the upper and lower panels in the trunk so neither will come off without removing the mounts first. The mounts tuck under the seal at the back and hang off the rear seatbelt openings at the front. The shelf fits solidly in the mounts by means of rubber tipped pegs which fit into a track.The thing that bothers me most is the presence of an ugly, horrible, nonsense logo plate on each side. They pop off easily enough, but appear to be attached with superglue so the residue will not come off (visible in the photos as white spots on the mounts just behind the shelf). I'll have to find something to cover those areas with.

So the side wall pieces don’t have anything to gauge if it’s lined up so you really gotta eyeball it with the panel lines in the trunk. The “lip” parts that hang underneath the seatbelt area were too long, so I had to cut it in half, Not sure if the fit was meant for EU/Chinese Model Y versions or if it was a bad mold(I have a 2022 US Long range). Overall really happy with how it looks, the shelf is perfectly sized that it puts some pressure on each plastic piece to the wall, but I think I need to replace the double sided tape with stronger 3m sometime down the line. Also there were two stickers on each side piece that I need to remove the leftover adhesive in the pics

I returned this item. There were no instructions. Not that they were needed. The package was pretty beat up but all seemed ok. I bought this item to cut down on the noise coming from the back while driving. The drivers side bracket went on easily. The passenger side bracket didn't fit. It seemed like it was too short. I would hook the front part of the bracket in the rear seat belt opening, but the rear of the bracket didn't make it to the rubber trunk seal where it tucks under. If you modify the bracket (clip the main support off), you might be able to get it to fit but for $199, I shouldn't have to modify anything. The brackets were very thin plastic. The cover itself seemed very light but looked fine. I really wanted this thing to work because there isn't much else available. I check online but I think everyone is selling the same thing under different brand names. I think I'll put a big cardboard box in the back with some foam on/in it.

No instructions included. Very tight fit. No guiding or anything included. Would not buy again.