VEVOR 3-Point Quick Hitch, 3000 LBS Lifting Capacity Tractor 28.31'' Between Lower Arms Attachments No Welding & 5 Level Adjustable Bolt, Adaptation to Category 1 2 Tractors, Black

Powder coating poor quality, flaked off during installation attempt. Steel does not seem to be heavy enough to handle a normal work load. Had to widen for my lower control arms to fit my Kubota Tractor. Spent $30 in hardware to make this happen. Once I go this working I was able to set up one of my implements. Top hook would not fit in my second implement as the bolts are in a bad location. I would need to purchase an adapter it seems to make this happen. Arms seem to not be square, wider at the top then at the bottom. Welds poor quality. I submitted for a return and will look for a USA built quick hitch.

The attachment came in bent on the bottom bad and the handel was broken off its cheaply made it did not survive ups deliver how will it hold up to a tractor attachments

One of the top handles was loose in the packaging because the drift pin securing the handle to the rod below had come out. The drift pin is too small for the holes in the handle and the connecting rod and does not fit tightly into the holes. The second one did not come out but is loose and easily pushed back and forth with one's fingers. The allignment/straightness of the lower arms is not perfectly straight/90 degree angle with the upper/cross arm, and the bracket for the top pin hook is not straight. The distance between the lower arms (inside) is 27 inches, not the 27.5 inches listed in the product specs in Amazon. I think this will be okay for the attachments that I am using but will need to check when the Cat I to Cat II adapters arrive. I will be seeking reimbursement from the vendor for the larger drift pins or nuts and bolts needed to securely attach the handles to their rods below. 7-17-22 In addition, the quick hitch does not fit a Cat I Kubota three point hitch. The bushings on the lower arms of the tractor three point hitch are 1.375 inches wide. The gap in the quick hitch where the arms are to fit is only 1.25 inches wide. The Kubota arms will not fit into the quick hitch without widening the gap. I am not willint to do this. I have repaired the loose handles with wider drift pins, at my expense, but now I find that I must return the item as not being able to fit my tractor.

The unit came in, Us mail refused to deliver to the house. Picked up the package and found one handle not attached pins missing. The hook was on backwards for shipping swapped around and found out the length of it was too short to use on my attachments. Bough a new extension hook, and different lower pins due to them not working one my tractor. Basically by the time I fix everything to make it work i could have bought a better one in the first place.

Lever lock come apart and my tiller jumped off the hitch. Very lucky I didn’t tear something up!

You get what you pay for here. The measurements are incorrect for small tractor. I would return but got bent installing. Save your money and get a quality hitch. All I have here is an over price 2” receiver hitch. Poor design and thin metal used.

This quick hitch will not fit a Kubota tractor.

not well made I sent back