Overhead Camera Mount Desk Stand, 3-Section Flexible Detachable Articulating Arm with 1/4“ 3/8" 5/8" Screw&360° Ball Head, C-clamp Tabletop Mount for DSLR Camera/Webcam/Microphone/Lights

Overall, I like this product. It's not perfect, but for the price, it feels like a good combination of quality and function. The Good: - I like the attachment mechanism of the 3 arms. Having the bottom screw be on an inline knob means they don't protrude and won't get snagged on cables, or get damaged in storage/transit. - The angling mechanisms feel extra sturdy as they lock into slots at different angles meaning it's not just a friction fit. This brings extra rigidity when you want your camera to stay put. - Extra mount accessories gives you a ton of flexibility. Full fledged camera, web cam, phone, lights, you can mount any device you need to here. - 3 piece length means you can remove one of the pieces if you don't need the added length for a shot. Also means you could later use these to extend another mount of some kind, or if you got multiples, you could mix and match for shots. The Bad: - Materials are... fine. Super light weight, so could be cheap, but assuming you don't overtighten anything and don't bang it around much, it should last a while. Given the price, I wasn't expecting reinforced steel anyway. - Because the angle joints lock at fixed angles, it's not infinitely adjustable. This is a tradeoff for the extra rigidity. - Each angle maxes at 90 degrees, so there's only so much angling you can do. - No rotation outside of the base unless you rotate where you connect the pieces. Not a major issue, but the extra stability lock if you have it the correct direction doesn't help if you twist them a bit. Overall, for the price, I felt it was a good value for the product you get. It does it's job well, and should be good for anyone getting into a hobby that may require this. Could be useful for still shots on projects, overhead shots for unboxings (why I got it), or even just a camera or light mount for a front facing shot to get the camera at the right level. I don't regret the purchase, as it will get me by till I find I need something better.

As someone who owns more mounts than a medieval knight owns swords, I can confidently say the DImotliyor Overhead Camera Mount earns its place in the armory. Most mounts promise flexibility, but this one actually delivers—especially when it comes to overhead shots. Whether you're filming a top-down cooking tutorial, sketching, unboxing, or just showing off your desk setup like it's a museum exhibit, this mount makes it easy. Setup was refreshingly straightforward. No need to summon an engineering degree or sacrifice a weekend. It clamps securely, adjusts smoothly, and holds steady—like a loyal tripod should. I’ve used it with a DSLR, a webcam, and even my phone (which is basically a camera with a texting feature at this point), and it handled all three without complaint. Is it perfect? No. But neither am I, and we’re both doing great. For anyone who needs a reliable overhead mount that doesn’t require a second mortgage or a spiritual awakening to use, this one’s a solid pick. Recommended. Especially if you’re tired of mounts that act like they’re allergic to stability.

Likes: -easy installation -joints are very solid once locked in -can be built in sections -includes phone and ball mount -rotatable base -very lightweight Dislikes -very wobbly under weight -included ball mount is cheap/weak -joints do not allow full articulation (somewhat mitigated by rotation and ball mount) Overall, for the price, it's a great mount. Most of the issues aren't going to be a problem for the majority of users. For a phone, or light camera, this mount is unbeatable. I tested the mount using a frontheavy Canon 90D dslr camera with a Sigma 18-35mm lens. As pictured, the whole setup weighs about 3.5lbs. While it does an admiral job of holding up my camera, it does appear quite wobbly, with slight desk movement. I have a very hard time believing it would be stable at 6 lbs as stated in the advertisement. The ball mount exacerbates the issue, barely able to hold my camera up at maximum torque, even at a relatively shallow angle. I seriously doubt the ball mount would work at a 90° angle for perpendicular shots. Luckily, you do NOT need to use the ball end to mount a camera to this stand. All 3 sections attach using a standard 1/4-20 UNC tripod connection, meaning you can disassemble and attach your camera to each section as you wish. With that said, it does appear to hold, even with the disappointing ball mount. The joints appear to have large, grippy internal teeth to ensure the mount does not lose integrity over time, although the initial sag from adding weight to the end is very apparent and must be compensated for during adjustments, which is a minor hassle, and cheapens the overall feel of the device. While there are some engineering problems that could be addressed, I am not unhappy with my purchase. If you already have a ball mount, or ideally an old, light tripod head, I recommend using it with this stand. If your device is 4lbs or less, I don't fosee any issues, however, above 5lbs I would be prepared for disappointment.

This adjustable arm mount works nearly perfectly for my DSLR camera. You have some flexibility because you can choose how many sections of it to install. Also, the rotating ball head makes it adjustable even more so you can fine-tune the placement of the camera and the angle, etc. I use my DSLR as a webcam so I needed to position it precisely above my monitor, and it's working well for that! The only thing I've noticed is that the camera sagged a little when I came back to it after a few days, so I had to make a small adjustment. This isn't a huge issue but you may need to tighten the knobs harder (not too hard) to get it to stay for longer. Overall, this product looks good/professional and functions as expected, so I give it a 5 star rating!

This is terrific! Heavy duty metal, the knobs are plastic but for my home business level of use, it's perfect! The table clamp is fantastic- wide, sturdy, once cranked it the arm won't shake or move at all. And it has a large space for a variety of tabletop thicknesses. The arm segment adjustability and webcam mount on a ball joint is perfect, I can do mid height or higher to see the entire table, and with bending the arm at a right angle I have a roomy workspace without bumping into it. My webcam autofocus FINALLY works, my old table arm was flexible and kept jiggling and was always at an angle, the autofocus couldn't handle it. I love this so much I think I will buy another one!

It's perfect for photoing or videoing items on a tabletop. If you do "review videos", it's a must buy.

This is more robust than a lot of other mounts out there. You can definitely mount a DSLR and it stays in place. It doesn't have a ton of adjustment but I'm using it exclusively for overheads and it's perfect for that. The quality is good and it feels robust and not something that will fall apart with repeat usage. Highly recommended.

Not as flexible as some but provides a very sturdy support for filming. I use my phone as the recording device, so not sure about the ultimate weight it can support, but it's suitable for a large phone at the very least. Plus the fact that it's very light makes it easy to take with you if you're on-on-the-go

Good

Buen material, producto de calidad, solo que para un peso de 2.5 kg hay que hacer un ajuste fuerte y solo con un soporte, para esa carga no es adecuado usar dos o 3 soportes conectados.

Pratique , simple, et efficace ! Rien à redire!

super einfach einzurichten / einzustellen und bleibt in der Position wie es eingestellt ist. Auch wenn man etwas schwereres dort befestigt!

Decent quality and good controls, don't overload it and it should be fine.