melos Computer Tower Stand, Rolling Printer Stand with Drawers, Pc Tower Stand with Lockable Wheels, Office CPU Stand, Cabinet Under Desk for Fax Machine, Copier, Scanner, Printer, Scanner

Put it together per directions, but the drawer doesn't close because of the outlet cord. Everything else was fine

The measurements are all wrong, not a single one is correct!Updated with some pics.You'll notice in the few before last, it looks like there are 3 different measurements and they are, it all depends on which way the legs are bowed.In order to get my rose will PC Tower to fit in the opening I had to remove the bottom shelf. By removing the bottom shelf that allowed enough room for my 18 inch tall PC Tower to fit. I also had to remove the back panel that houses the three prong and USB outlets. Not too worried, I'm going to cut a hole in my desk and put it in there. The biggest downside using this with my PC Tower is the power, reset,fan speed controls, 2- USB 3.2, 2-USB 3.0 ports are either completely blocked by the drawer or depending on which way the legs are bowed the door will shut if I left a little. It's a little bit of a pain to use the drawer like that but I don't use the USB ports on top too much or the mic and headset plugs. When it's in the configuration that the drawer moves in and out easily all I have to do is pull the drawer out a couple inches and I can change the fan speed, hit the reset or power button.Now that it's pretty much where it's going to call home (except for when I need to access the rear panels), I'm going to make braces for each side that attached to the exterior so it's not all wobbly. Other than that I plan on keeping it but my rating is not going to change!Probably one of the best parts about it is I don't have to take it apart completely to remove the glass side panel to access the interior of my tower.Just be aware without the bottom shelf the tallest tower that will fit with a little assistance is 18" (not including feet, mine sit on the inside of the frame) or 17" if you want the bottom shelf (that gives it the strength of the legs don't bow) and a drawer that opens and closes without issue or tinkering.As far as assembly goes this took me at least three times longer than the other cart that I ordered that looks kind of similar but has a cloth type drawer and a wire rack bottom.The pro is that the cord for the outlet is heavy duty.The USB ports charge at 5.1-5.25V, 1.01A-1.85A measured using a USB 3.0 inline power tester.The 18.9" is really 17.75" My PC tower is 18.5" so it's a bit of an issue!The 4" is really 6"The 11.4" is really 11.75"The 15.3" is 15.81"The 26.9 is really 27.9" it may be a little taller, I will update after I straighten out the bend in theThe Drawer The inside part of the drawer is 8.25"x13.25"The 9.8" is really 9.25"The 14.7" is really 14.25"

I had previously ordered a similar one and realized that it was too small. I ordered this one because it was a similar style, but it's still too short for my tower. It's the exact same size as the other one I ordered, with the only difference being the power cord.

I really like the sturdiness of the stand I put together so far, however I have once cracked piece. I was on the last step of the install and found part of the drawer cracked. There’s no way to contact the seller, part of the reason I’m leaving 1 star.