Solder 350 Pcs Seal Wire Connectors

Great product, used these to splice several broken wires in a chick brooder. There is a large variety of pieces. Easy to use and is working well at this time. The heat shrink and sealing work well. Great value for the money. Looks great.

I think the reviews complaining about these connectors are not using them correctly. They worked perfect for me. They have a strong hold better than crimping, an airtight seal, and if you use the proper size for the wire you're working with they shrink to a glove tight snug. I've had zero problems with connectivity on any of my projects. These are not regular heat shrink tubes. You can't use a lighter or a torch. A lighter won't melt the solder, and a torch will melt the tubing and your wire before it melts the solder. I used a heat gun I got off of Amazon for $20. It has two heat settings, and a reflector on it so the entire tube was heatedly evenly in seconds. Spend just a few extra seconds around the solder ring. Don't immediately try to pull on the connection. Of course it's going to come apart while it's still curing. These are made to withstand shaking and movement, not heavy weight pulling. No one is going to come and tug on your wires to pull them apart. All that aside, I absolutely recommend these shrink tubes to anyone who's doing at least minor automotive electrical wiring. I installed a dash cam, aftermarket radio, and rear view cam into my car using these and they have held up perfect. Short of it is, don't blame the product for human error.

⚡️If you do any automotive, marine, or general electrical work, stop messing around with crimp connectors and buy this multipack of Heat Shrink Wire Connectors! This 110,piece set is an absolute must-have to keep on hand and delivers a connection that is superior in every way in my experience! ​⭐️The Solder Seal Difference: 📍The Rock-Solid Connection: The low-temperature solder ring in the middle melts quickly and reliably, creating a perfect, electrically sound bond that is stronger than any traditional crimp that I've done or attemptd in the past. There's no guesswork or worrying about pull-outs! 📍Weatherproof and Durable: As the heat shrink tubing shrinks, the internal adhesive melts, creating a completely watertight and corrosion-resistant seal. I've used these in underground fencing, electric fences, ATV's, Trailers, and on automotive wiring where exposure to moisture is guaranteed, and the connections have held up flawlessly! 📍Incredibly Easy to Use: All you need to do is simply strip your wires, insert them into the connector, and apply heat. The color-coding makes identifying the correct gauge simple, and the whole process has taken me less than 30 seconds per connection. They have always shrinked tight and look incredibly professional when finished! ​⚡️This multipack provides a great assortment of sizes for virtually any job. The quality has always turned out top-notch, and the reliability and durability that they have added to my projects are well worth the price. This is the only way I connect wires now. Highly, highly recommended! ⭐️⭐️⭐️⭐️⭐️

These connectors worked out good, used them to rewire my boat trailer. Perfect fit and a good seal. Only thing I noticed was the solder doesn’t melt completely but enough to make a good connection and it does shrink down to tighten connections.

These work well and we're easy to use. We replace the cord on our DeWalt sander because it was pretty frayed and these are small enough that you can butt lines together and still able to fit him into the sander housing. The shrinkage were truly good and we used a heat gun to melt the solder by simply holding a tablespoon on the opposite side to reflect the heat back and it worked really well. My husband is not good at doing electronics or repairs but he was able to do this and I am impressed at this product. To buy a new sander would have been $90 plus tax to fix this it was $20 for the cord and $10 for these so I was able to fix it for 1/3 the price.

There's only one problem and amazingly most of them just gloss over it.... The melting temp of the solder in this product is WAY too high, and and the shrink wrap *will* fail catastrophically long before the solder can accomplish its task.. This is a design problem not a user problem, and it's potentially dangerous unless you completely verify the connection and then insulate the piece securely prior to energizing the circuit- Its very possible, and actually probable, you'll have exposed wiring if you don't take these precautions. The fact is this is a terrible product, and if you care about the quality of your work you should run away from this stuff as fast as you can. It's easier and actually faster to do a manual butt-splice than it is to mess around with this garbage.

I've used this product in the past and liked how easy it is to make a reliable strong and water proof join, but I order a new pack and have had a terrible time getting the solder to flow that I come to expect it to. I not sure if this is a one off, but I have no correspondence from the seller on my issue. Be aware the connection may test good but my not last long. Again I'm assuming I got unlucky with a bad batch.

These work great

easy , handy, organized