Silk Dual Color PLA 3D Printer Filament Bundle 1.75mm +/-0.03 mm, Silk Coextrusion PLA Shiny Filament 0.25kg/Spools,4Pack(2.2lbs), Blue&Green, Red&Green, Red&Blue, Gold&Red

This is a very nice combo pack. I bought jt for my AD5X to do some multi color prints without breaking the bank. These are very small rolls. More like a quarter of the size of a full roll. It does kind of give you an idea of what colors you like and what colors you don't so there is that. Sometimes with some colors you really don't want a ton. In all truth you're getting about two whole rolls of filament in quantity. It's really uo to you if that is a good value or not for this price. For me I like having the opportunity to try all of these different colors. The filament is fine. Prints fine, I have been running it a little hot at 210 and printing at 0.08 and I'm getting excellent details out of it. So far the diameter of the filament has seemed to stay near 1.75. I haven't had any issues with clogs at all. Also, I did read winding has been a struggle for some but as of now I haven't had any tangle issues at all. So all and all, I think this is a great multi color choice.

Really nice filament if you’re going for looks. The dual-color effect is awesome and the silk finish makes prints look super clean and shiny. Not quite as easy as regular PLA—I had to tweak temps and slow things down a bit. It’s also a little weaker, so I wouldn’t use it for functional parts. Overall, great for decorative prints and totally worth it if you want that eye-catching finish.

I’m extremely impressed with the ERYONE Silk PLA Filament Bundle. The colors—Liquid Gold, Silver, Red Copper, and Green—are absolutely stunning with a rich, glossy silk finish that really makes prints pop. The shine looks almost metallic and gives decorative models a premium, eye-catching appearance right off the printer. Print quality has been excellent. The filament feeds smoothly with consistent diameter, no clogs, and very minimal stringing. Layer adhesion is strong, and details come out crisp and clean, even on more intricate designs. I printed a decorative multi-color piece and the surface finish required almost no post-processing. Each spool was neatly wound and vacuum sealed, and the smaller 0.25kg spools are perfect for color-swap projects or testing without committing to a full roll. Great bundle for artistic prints, display pieces, and gifts. If you want vibrant color, silky shine, and reliable performance, this bundle is a fantastic choice. Highly recommended!

Worked well with Bambu Lab printer. It’s what they recommended so we bought it. Looks really good when printed. Nice multi color pack. Small rolls - but gives lots of choices for projects

I recently tried the ERYONE Silk Tri-Color Coextrusion PLA Filament, and it was quite impressive. The blend of red, blue, and green creates a unique and vibrant effect that adds a stunning visual appeal to prints. As a silk filament, it has a lovely sheen that enhances the overall look. While the print quality was good but not the best, the 250g spool size is perfect for experimenting with new colors. Overall, it's a great filament for those looking to add some unique and colorful prints to their collection. I highly recommend giving it a try!

I ordered this filament on Black Friday as a whim and had low expectations. I haven’t used many silk filaments and no multicolor filaments, but this filament changed my mind. You are able to run this filament in your 3D printer like any other PLA, and achieve exceptional results. I printed on a Bowden style printer which is not best practice according to the manufacturer, but I had no issues. The filament did not twist, and the shifting color was achieved. I ordered the 4 pack of colors, which is a great way to experiment with this filament and have color options. The only issue was the 4 pack each roll has 250g of filament, and use smaller than standard spools. The filament on these smaller diameter spools likes to unwind faster than the machine was taking the material. I watches the print for the first few minutes as I was concerned about tangles, but no tangles formed. I did find the material to be a little more brittle than a “normal” PLA, and did not like to peel off the raft and broke into small pieces. I would not use it for something that flexes, a living hinge, or weight bearing near the mechanical limits of PLA. I think if you have a basic 3D printer these kind of filaments are a great value and a way to extend the types of finishes you can achieve.

this is complete Garbage filament. I tried it on a new printer and although everything came out it was completely trash. I haven't seen such garbage PLA for 5 years when I used a much cheaper filament.

Summary: Eryone is great easy filament to work with and gonna buy more now. Def recommend this one. I have two ender 3 that runs with octopis. First ender 3 has all metal microswiss and second ender 3 has everything stock except it is direct drive. Both Ender 3s are direct drive. I used generic PLA in Cura to start with and I will list out below what I changed. First Ender 3 (All metal microswiss with PEI sheet and CR Touch) Retraction Distance = 0.8mm Retraction Speed = 35 mm/s Combing Mode = Not in Skin Second Ender 3 (Direct Drive Stock with PEI sheet) Bed Temperature = 70C Print Speed = 50 mm/s Retraction Distance = 1.5mm Retraction Speed = 35mm/s Combing Mode = Within Infil At the first, I ran temperature tower, retraction tower, and Benchys as test subjects. I ended up using generic PLA temperature except for second Ender 3 then tuned retraction for Direct drive mode. I noticed that my stock Ender 3 was struggling with adhesive but I was having great lucks to slow print and keep stringing inside of infill. I printed Darth Vader and Flexi-Rex with stock Ender 3, and the print came out great. Rest of other prints are done by first Ender 3 and print quality looks super great. I find that Eryone is great as Overture which is my favorite filament to work with. Now I will be buying more Eryone since quality is great especially you didn't have to change much. Plus look what I have made and I love what I have printed. Color looks so sick for models and they will be in living room where everyone can see them. For tips to make color looks clean, try print with low infil for base and then use vase mode or support block to have rest of model to be 0% infil. All of models can be found on Printables.

Bel filo, consiglio

primero que nada, buen producto..... pero me saco canas verdes al principio, se atascaba en el extrusor, compre un extrusor nuevo, y tan tan.... pero no era el extrusor, uso una creality K1 SE y para imprimir bien y sin atascos no pongan el filamento dentro del tubo de teflon pues esto causa los atascos, la friccion dentro detiene el flujo, empeze a imprimir como si fuese TPU, directo al extrusor y todo solucionado no fue necesario bajar la velocidad de impresion al tenerlo directo sin el tubo bowden

Great filament. Prints well. Always be sure to dry your filament.

Update Dezember 2023: Inzwischen konnte ich auch das Tri Silk erfolgreich testen. Selbst mit 250mm/s waren die Druckergebnisse wirklich gut. Neben einer Silvester-Brille ist vor allem das neue Cover für den Xbox Controller wirklich sehr gut geworden. Nach diversen Drucken mit Eryone Filament bin ich inzwischen definitiv überzeugt! -------------------------------------------- Ich bin 3D Druck Neuling mit dem AnkerMake M5C und wollte mich jetzt auch mal an ein "feines" Filament wagen, nachdem ich bisher nur einfarbiges PLA+ probiert hatte. Natürlich hat mich beim Eryone auch der attraktive Preis und die immer wieder geltenden Rabatte gelockt. Nachdem man - gerade als Neuling - das Setting einigermaßen eingestellt hat, war ich überrascht, dass ich den Testdruck (natürlich den Klassiker Benchy) im Schnelldruck richtig sauber hinbekommen habe. Auch wenn man hier natürlich den Schnelldruck sieht. Denn PLA - so habe ich es inzwischen gelernt - sollte man nicht unbedingt zu schnell drucken. Der zweite Druck - ein Hand-Modell für Ringe und Schmuck - erfolgte dann deutlich langsamer. Leider passten die Retraction-Settings nicht ganz, so dass ich zwischen den Fingern Stringing hatte. Aber dieses konnte ich gut mit einem Entgrater entfernen. Das Ergebnis lässt sich sehen. Der seidige Effekt mit den beiden Farben macht sich bei solchen Drucken richtig gut finde ich. Ich bin sicher mit dem Eryone PLA noch viel Spaß zu haben und schaue schon auf weitere schöne Farbkombinationen. Vom Preis-Leistungsverhältnis - gerade mit den Rabatten - eine absolute Empfehlung!

In het beging wat moeilijk en veel draadjes net als een spinnenweb . Is wat werk aan na het printen