Anti-Mould White, Waterproof Mould Protection, Long-lasting White Silicone Sealant for Kitchen & Bathroom, Powerful Bath Sealant, 1 x 274g Cartridge

I used this UniBond Anti-Mould Sealant in my bathroom a while ago, and I’ve had no issues with it since. It applies smoothly, seals perfectly, and provides a durable waterproof finish around the bath and sink areas. Mould does occasionally reappear around the seal over time, but I can’t fault the sealant itself for that — it’s more down to the general bathroom environment. Overall, it’s a high-quality, easy-to-use product that delivers excellent results and lasting protection. I’d definitely use it again for future bathroom or kitchen projects.

Very good product. Did the joint. Good adhesion and the price was very good too

I used this UniBond White Silicone Sealant to re-finish a kitchen worktop. After two years, the majority of the sealant is still bright white, however, there is a small patch of black mould on the section just behind the taps. To apply the sealant, I found the best method was to use a plastic sealant finishing tool (See below). This tool helped me to smooth out the sealant and create a clean, professional-looking finish. It also made it easy to control the amount of sealant that was applied, which helped to prevent any excess from building up. The sealant itself was easy to use and had a nice consistency, making it easy to spread and smooth out. It had a typical sealant smell and didn't cause any irritation when I used it. In general, I found this sealant to be a good quality product that was easy to use and provided a nice finish. However, the small patch of black mould on the section just behind the taps is a reminder that it is important to keep the surface clean & dry. Applying this can be done with a standard caulking gun, but for a more professional finish, a plastic sealant finishing tool can be used. Here are the steps to apply the sealant with a plastic sealant finishing tool: (YouTube also has some good videos showing how to apply it using the tool) 1. Cut the nozzle of the sealant tube to the desired width. 2. Apply a steady and consistent bead of sealant along the area where you want to seal. 3. Use the plastic sealant finishing tool to smooth out the sealant, ensuring that it is evenly distributed and fills all gaps. 4. Use the tool to create a smooth and clean surface, paying special attention to corners. 5. To apply the sealant around corners, hold the tool at a 45-degree angle and use the corner of the tool to press the sealant into the corner. Then use the flat edge of the tool to smooth out the sealant, making sure that the corner is filled and the sealant is flush with the surface. 6. Clean any excess sealant with a damp cloth or paper towel. 7. Allow the sealant to dry and cure according to the manufacturer's instructions. It is also important to note that the surface should be clean, dry and free of any mould before applying the sealant. If there is any mould, it is important to remove it before applying the sealant in order to ensure the sealant will adhere properly and prevent the mold from coming back.

I recently used the UniBond Anti-Mould White, Waterproof Mould Protection Kitchen & Bathroom Sealant, and I’m thoroughly impressed with the results! This sealant delivered on all its promises, making it an excellent choice for any kitchen or bathroom sealing job. Here’s why I’d highly recommend it: Pros: Exceptional Anti-Mould Protection: The anti-mould formula really works. In high-moisture areas like showers and sinks, mould can be a constant issue, but with this sealant, I haven’t seen any signs of mould or mildew reappearing even weeks after application. Waterproof and Durable: The waterproofing is top-notch. Even with constant water exposure, the sealant remains intact without any peeling or cracking. It’s holding up extremely well in my shower and around the kitchen sink. Easy Application: The 274g cartridge was easy to use with a standard caulking gun, and the sealant itself spread smoothly, making it straightforward to get a clean, professional finish. The consistency was just right—not too thick or runny—so it was easy to control during application. Clean, Long-Lasting Finish: The white color is bright and clean-looking, which really enhances the appearance of tiled areas. After curing, the sealant has a smooth, even finish, which not only looks great but also seems like it will stand up well over time. Great for Kitchens & Bathrooms: This product is versatile and effective in different areas. I’ve used it both in the bathroom around the tub and in the kitchen around the sink, and it’s performed excellently in both locations. Overall Impression: The UniBond Anti-Mould Kitchen & Bathroom Sealant has been a game-changer for me in tackling areas that are prone to mould and water damage. It’s reliable, high-quality, and easy to use, with great results that look like they’ll last a long time. If you’re looking for a durable, effective sealant for your kitchen or bathroom, I would definitely recommend giving this one a try!

Great product and my go to product for around the bath and sink but a little pricey

good product with price

Easy to use, brilliant white and does exactly what I need it for. Sealed all around our bath and shower. Hate using this type of stuff as I always seem to end up getting it all over the place, this wasn't too bad, still used a load of rags to clean up but over all really pleased.

My favourite company for sealant because you know it’s great quality but also this one is so good to apply. Others are cheap and runny but this is a perfect texture and gives the best finish.