CiT F3 Micro-ATX PC Gaming Case, MATX & ITX Motherboard Support, Windowed Side Panel, SD/TF Card Reader Built-In, 2 x 120mm Purple LED Fans Included | Black / Purple Stripe

Very nice case, metal frame and side panels give the affect of quality, the side window is clear if not entirely necessary. Plenty of room in there to run a graphics card thats maximum 300mm long. Air flow throught the case is good with my system running at 40 degrees idle and around 55 when gaming. The 2 fans are good very quiet and can be slid up and down to line up with cpu coolers. All screws and connections seem quality and threaded in without any hassle. Plenty of space for cable managment on the right side of the case allowing for some very thick cables to be hidden away nicely. The SD ports on the top are a very helpful addition and allows me to bin the numerous adapters ive had to run in the past. All in all extremely pleased. They should make a version with an included power supply as im sure CiT manufacture those too.

I bought this case for a budget Ryzen 5 3600/ RTX 2070 build and its a great budget case. Nice build quality, airflow seems decent and the case even comes with two purple LED fans to match the purple stripe design. The two included, pre-installed fans are quieter than expected and can either be powered by PWM on the motherboard or via Molex found on some power supplies. Fitting all the components was easy and the case comes with ample screws for everything you'd need. The only negatives Id mention is some 3 fan graphics cards wont fit in this case and there isn't much room to cable tidy properly. The case has a nice selection of ports on the top which include USB 2.0 & USB 3.0, audio ports and a memory card reader which is a nice bonus. The case also has a window on one of the side panels. The case is wide enough to house taller CPU coolers. I swapped the AMD stealth cooler for a double fan Arctic Freezer cooler and it fits in the case with some room to spare. If you want a budget case (under £30 for the purple version when I purchased) then I'd definitely recommend this one!

This is a good small form factor case suitable for Matx format. The 2 fans that come with the case are quiet and give off a nice blue light to light up the case. The case feels reasonably well made and sold. There are plenty of front connections (which are on the top right side of the case) including a USB 3.0 port.Cable management can be achieved with a bit of effort - but obviously there is not a lot of space around the case and it is a budget case. The main difficulty I found was actually manipulating the PSU initial wire as they end up quite close to the HDD bay at the bottom - but with a little bit of persuading it is manageable.The space for HDD's and SSD is great - they can be nicely arranged and organised which is a big plus point for a case of this size. There is no space for a CD drive - but I have no use for one anyway so not an issue for me - but be aware of this if you need to use a CD.Be warned though that the plastic clear side panel was slightly scuffed - which was a shame - but I chose not to bother messing about sending it back and it was going to be a mess about - however this is something to be aware of if you chose to buy it - quality control is obviously not something that is checked. This is, however the only minor point and I chose not to mess about with return. In saying that the scuff does not get in the way too much.

This is a budget case and it very light - however, the feature set is pretty good. It has a front and back case fan, which are both illuminated by 4 x purple LEDs. There are no sharp edges in the case and everything is coated with black, so it looks great.Airflow is great, with openings in front and back and vents in the top and bottom of the case. Installation of bottom-mounted PSU, mobo etc. is all very good with everything fitting well. There's even a little slide-out tray that fits either 3.5 or 2.5 drives. There's a top SD card reader, which is good and a bunch of USB ports. Everything worked really well and I'd highly recommend this to any one wanting something cheap, good-looking and easy to work on.

So I recently embarked on a mission to create the cheapest PC that works fine and does what I need to do. I ended up picking this case because it was very cheap and came with case fans. It feels well built and doesn't have any flex but with all this said the case isn't perfect.The SSD bay needed to be bent to actually let the SSD slide into place and there is hardly any room for cable management. Summing a list of issues into one statement, it is an arse to build in but definitely doable.If you have perseverance you can build in it and to doesn't look all that bad. I would recommend it.

As budget cases go, this is the best one for cost and features. A bit tight on space inside but manageable. Nice build quality, airflow seems decent and the case even comes with two LED fans to match. The case has a side window that lights up nicely. SD/TF card reader included and compatible to fit 6 internal hard drive bays. Room for 2 x 3.5" and 4 x 2.5" hard drive bays. I bought this case for a budget Ryzen 5 3600 build and as it goes, it’s a great budget case. The case has a good selection of ports on the top. If you want a budget case then I'd definitely recommend this one!

The delivery of this product was prompt. The case is very sturdy and looks nice. There is a nice finish to the plastic parts. The only downside is that it does not come with space for an optical drive but it has a fair amount of space in it. This case only supports MicroATX motherboards!!!. There is enough space to fit some of the larger models of graphics card in the case. The window on the side panel could be a little higher so then you get more of a view of the motherboard rather than the top of the power supply. There are many places that you can use to help cable manage and places in which you can tie down the cables so it looks neater. Overall this case is very well made for the price you buy it for.

This was a fun little build for my 12yr-old. Paired the green case with green CPU fan, green and black PSU wires and green sata cable. Love the look. Case was super easy to work with. Plenty of room to manage wires. I paid more than the case was worth but the green and black aesthetics on this case was the most appealing I found so was worth the extra $20 USD bucks to me.

I liked that it was cheap, with fans that are relatively quiet and that it has connections relatively easy to reach (SD Reader, Earphones and USB).The quality of the mounting points (where you use screws) are a bit weak, I damage a couple of them, hopefully I will not do so much work on it (open/close) so I guess it does not matter.It is adequate for my uses, so I am quite happy.

So its a desend case, but it has not enough space for cable management. Overal is okay for the budget.

Ser ut och fungerar bra

Che dire questo case mi ha rimasto positivamente colpito.Comprato per un pc low cost è il miglior componente che potrete trovare su amazon a questo prezzo.Materiali buoni, Due ventole Rgb (frontale, posteriore)Il vetro laterale è stupendo, i led fanno ottima figura che dire a questo prezzo il miglior acquisto che potete fare.