STANLEY Low Angle Sweetheart Jack Plane with Patented Lateral Adjustment Lock, 1-12-0137

Now, this is definitely a tool for the enthusiast that's for sure. And if you are then come on in.This Stanley plane of course buys into the resurgence - especially in the US - of hand tools used in woodworking. And amongst that movement, hand planes have taken on an almost hallowed status with online arguments to rival WW2. The upside is of course that companies like Stanley have decided to offer top end products that border on works of art. Which this is.Firstly the build is superb. The cast plane has a fine grain texture and quality that is immediately obvious. It is as perfectly flat as I can tell - and I've had 30 years as an engineer working with multi-million dollar bits of machinery installed to superfine tolerance such as steam turbines. I know when something is flat and it would take a high end marking out table and super high quality measuring tools to determine if this was out of true. You won't find it with a steel rule as the level is so good.It is fitted with an A2 plane iron which contrary to what some think is not some sort of esoteric metal offering the nirvana of surgical edge with the longevity of the Queen. It's simply air hardened steel that is a nice balance of edge and life. Personally I prefer O2 steel (oil hardened) that will take a finer edge but require a bit more regular honing. A2 is the buzzword right now for planes so this comes with it.Handles feel tactile and comfortable. I like the matte finish which isn't as quite as the old planes would have been as they would have had a gloss varnish on them. Adjustments are excellent with a quality finish and feel.I tried this out of the box on some end grain and it cut well. Of course like the plane pedant that I am I honed it afterwards and tried it again to see if it was better which it was. But not by a huge margin. Tick one for Stanley.Overall a great alternative to the much more expensive Veritas or Lie Nielsen planes.

I was expecting to have to put a bit of effort in to get this working but, to my surprise, it actually took decent shavings right out of the box on Ash and Beech. All square and a good level of fit and finish. Mouth and blade adjustment work well. As with most things, a dud is sure to slip out now and then but I found nothing untoward with the one I received. I bought this because I have a lot of accurate jigs to make out of plywood and acrylic on the shooting board, (not the kind of material I want to use my LN or vintage planes on), and it could then assume a permanent role as a general "household" plane but I'm sufficiently impressed with it that it might stay in the workshop.If I had anything negative to say it would be that the lever cap certainly isn't as nice as a big lump of bronze but it doesn't affect performance. I also think the handle is a little on the chunky side and definitely not as comfortable as my favourite vintage Marples planes or my Lie-Nielsens but it's not a deal breaker for me.Compared to the other low angle jacks out there, the Lie-Nielsen is almost exactly twice as much, the Veritas twice as much and then some and even the Quangsheng is about £40 more. By any reasonable criteria it's a perfectly acceptable tool but I'd even go as far to say that it's actually rather good for the money. Yes, a Veritas or LN would beat it soundly in a woodworking magazine shootout but it works just fine under real world conditions and any minor shortcomings, (the handle, lever cap), are perfectly forgivable considering the price. Probably not one for tool fetishists but as functional item I can't really fault it.

When it works, it is very good.Lateral adjustment is very finicky, I've had to rework my shooting board so it hits the blade centrally so it doesn't move the iron.The knob that also locks the mouth was manufactured so the wood touched the adjustment lever before the brass insert. This caused more friction when locking the mouth and the lever to move when tightening, and eventually the brass insert pulled out of the knob. I epoxied it in again so that the brass made contact first and had no further problems with it.The iron was not ground square, so the lateral adjustment always had to be at an extreme. I had to regrind it on a bench grinder and it's ok now.My one's sole is flat. I had to file down the corners as they were very sharp and marred the work easily.Overall it's a very good plane, and is my preferred shooting and end-grain plane, but it took nearly as much work to get it performing well as it would a second hand one, which is a bit disappointing.

I'm sometimes puzzled by 1 star reviews. People have complained about nuts being too short so the cap iron won't grip properly, others have complained that the plane wasn't packaged properly. I'm not saying that these reviewers are wrong, I'm just saying that in my experience, none of these drawbacks occurred. My plane came in a huge box with lots of packaging. When I unpacked the plane and wiped off any excess oil, I found it easy to assemble and adjust. I used the plane without doing any tuning up or sharpening the blade and found it a delight to use. I used it to clean up the outer veneers on birch faced plywood. This I've found to be particularly prone to tear out, but using this plane I found no tear out issues at all - so far at least. This, coupled with the fact that it is about £150.00 cheaper than the Veritas or Lie Neison equivalents make this a real bargain. Delivery too was much sooner than I expected. In short, I'm delighted with it. It looks gorgeous, the handles feel very comfortable and hopefully, this plane will give me pleasure every time I use it for the rest of my life and beyond.

Most woodworkers struggle with rough grain, end grain, tearout and other evils of the forest. I have been using hand planes for a few years and finally bit the bullet to buy something costing over £100. Well it's worth it. ( yes - I know one can spend 4 times as much on a Lie Nielsen, Veritas or Clifton but you don't have to)! The plane is simple, solid, well presented and ready for work. The silky finish that this plane leaves is not to be believed, nor the way it cuts through difficult grain. Of course the basic rules apply - check grain direction etc. but it is a fabulous addition to my tool cabinet and I am a happy man! Sweetheart it is! Well done Stanley!

Haven’t used it yet but have taken it apart and am very pleased with the quality. The blade is sharp and perfectly flat, the base of the plane has a nice smooth finish and all the edges are clean and the handles give a comfortable and solid grip. Worth the money and looking forward to using it.

Overall this is a good value for money, but as some other buyers have stated, the sole of the plane is not ground paralell to the bed of the blade. As a result the blade is protruding from the mouth on an angle, restricting both the lateral adjustment and the closing of the mouth. I had to regrind the sole to a more correct angle, now the plane works great. Given that most planes need to have the sole flattened out of the box anyways, this was not a total dealbreaker for me, but I could easily see why others would think so. Not really high enough standards to claim this is a high end tool, but at the same time a pretty amazing tool if you get a good one!

this is the second new plane I have found that can be used straight out of the box, No need to sharpen or flatten the bottom or blade. Used it straight from the box and it worked well. No need to pay twice the price for those expensive planes and then pay £90 to have them 'fettled' to be able to use.Well done Stanley.

Excellent petit rabot pour les finitions et les ajustements précis ! Le Stanley 1-12-137 tient bien en main, et son format compact permet de travailler dans les moindres détails : chants de planches, arrêtes, petits ajustements d’assemblage…La lame est bien affûtée d’origine, mais un petit affûtage supplémentaire permet d’avoir une coupe vraiment rasoir. Les réglages de profondeur sont simples et efficaces, et le corps en fonte donne une bonne inertie sans être trop lourd.Parfait pour les boîtes en bois, les finitions d’ébénisterie ou l’ajustement d’onglets. Rapport qualité/prix au top chez Stanley. Je recommande à tous les bricoleurs et menuisiers exigeants.

Vale la pena perderci un pò di tempo per spianare il fondo e darle una buona affilatura perchè poi ne esce fuori una pialla eccelsa, usata per tutto, fantastica anche su legni molto impegnativi

Para un uso profesional bien, hay que ajustar porque lógicamente viene con la cuchilla retraída, la cuchilla llegó muy bien afilada para afeitar los pelos del brazo, quizás ti eres hábil un pulido y corta el aire. Con el filo que trae saca un viruta muy muy fina si el lo que quieres para terminaciones, y para desbastar increíble porque su pero permite con la inercia hacer cortes increíbles y sacar material para iguales tablones largos o tableros 👌🏻.Sin duda merece la pena la inversión, hay la mitad o menos de baratos, pero para uno no profesional y acabados decentes.Hay garlopas mucho más caras ,a no ser que hagas trabajos de abanisteria muy exigentes ésta garlopa va de sobra.Un pero es la tapa de aluminio que sujeta la cuchilla si vas a realizar trabajos "bestias" pero por eso en vez de sacar virutas gruesas y en 2 pasadas mejor 5 pasadas en virutas finas, además conseguirás igualar más uniformemente 😊.Herramienta para toda la vida. En la imagen de ve solo recién salida de la caja y ajustado la cuchilla.

Es costoso si . Pero muy bonito y eficiente da gusto tenerlo

Die Bewertungen für den Sweatheart fallen ja sehr unterschiedlich aus, da ich aber im Juni 2021 kein anderes hochwertiges Exemplare eines 62er Jack von Veritas, Lie Nielsen und Co. kurzfristig bekommen konnte, hab ich für ca. 160 Euro mal den Versuch gewagt.Und ich war positiv überrascht. Mein Exemplar ist sehr gut verarbeitet, die Seitenteile stehen im Winkel, das Messer ist anständig und nahezu gebrauchsfertig. Einzig die beworbenen Kirschgriffe stimmen nicht. Die sind aus gebeizter Buche. Nicht schlimm für den Gebrauch, aber halt nicht richtig deklariert. Ich denke man wird mit dem Teil lange Spaß haben. Lediglich der Keil bzw. Lever Cap ist aus Alu. Da bin ich mir nicht sicher ob der auch die 100 Jahre schafft, beim Rest bin ich mir sehr sicher. Der Mechanismus für die Maulverstellung ist leichtgängig, hat einen großen Bereich und läuft absolut präzise und mit sehr geringen Toleranzen. Lediglich einen Anschlagsbegrenzer zum Messer könnte man vermissen (für mich aber nicht wichtig, muss man ein wenig aufpassen). Schönes Produkt für einen angemessenen Preis und top Lieferung von Amazon wieder mal.