msiMEG Prospect 700R – 4.3" Touch Panel Display - Tempered Glass Side Panel - Vertical GPU Mount – 4X ARGB 120mm Fan – Liquid Cooling Support up to 360mm Radiator x 1 – Cable Management System

I chose to buy this PC case after a painstaking process of researching computer terminology, components, compatibility, and much more fact checking. I compared it to many other cases, weighing the pros and cons of each. As this was my first build and the fact that I did not know what I was doing, I took a long time to consider my options. My considerations included aesthetics, features vs. price, easy of construction, materials, and the ability to add and subtract components as newer technology released. Now I may be way off the mark but I estimated the value of what I would get by choosing this case against what I would have to buy on top of another case that was $150 or less. Yet, things like the materials are not so easily changed if at all. Side Note: I do recommend stretching before lifting this case as it is made of quality materials which just so happen to make it quite heavy. I am young and exercise on occasion but found the initial awkwardness of not knowing where it was safe to hold it to be bad news for my back. I also recommend a strong table that can support more than 60lbs.Now, my critique of this case involved the ARGB Fans, LCD Screen/Features/Sensor, space to assemble, space for the parts to breathe, the number of additional cooling features, the size of cooling features, placement versatility of said cooling features, ease of assembly, possibility to fit an eATX Motherboard, and a Vertical Mount option for the GPU.The ARGB Fans that come with the case do their job. I may buy one more fan for the top and place it by the Exhaust Fan in the back to balance out the pressure and reduce the wear of the single Exhaust Fan currently on the case. The LCD Screen has good features that are useful but not critical. The LCD Screen is more for fast aesthetic changes and to get an immediate but general idea of non-specific data such as Weather, Fan RPM, Ambient Case Temperature, etc. Before buying, I assumed that aesthetics do not need to be changed all that often. Depending on your setup, lighting control would be better off with other software. The same can especially be said for temperature monitoring of individual components. Fan Speed is decent but being able to alter the Fan Curves is preferable. Again, additional software is better than relying on the LCD Screen if you want to fine tune and develop a profile for gaming versus casual use. The case is fairly user friendly and as long as you come at it with a plan, you will reduce frustration immensely. I highly suggest taking apart the modular features before adding components in order to learn how you may wish to place everything inside. Knowing you can remove the top panel and the filter, for example, told me I could plug fans in without struggling to fit my hands between the CPU Cooler and the top of the case. Also, knowing how to gain access to your PSU is important when you want to run a bunch of wires through the same place. The last thing you want to do is take everything out just to realize a panel could have been opened to access the problem. The room I have left over in my case is currently excessive but welcomed for future growth. There is little to obstruct airflow and cable management is fantastic. Just be advised that a big case demands cable length. Even with this case pushing Full-Tower size, I had enough length to get everything to where it needed to be. I love the fact that I can add a bunch of 140mm Fans if I need or Liquid Coolers/Radiators. I am not even limited to where I choose to place it. However, this case does not allow placement of a Radiator on the bottom. Although, it is usually not a great place for it due to air getting trapped in the pump thus damaging it. That is unless the pump is pumping from below, hopefully allowing the air to naturally rise away from the pump. The eATX option and Vertical Mount is good to have but I may never require them. Be advised to the Vertical Mount option being in a contest for space with the Fan Cooler you planned to use on your CPU and the fact that you will need to order a Riser Cable if you did not get one by other means. I am fine with the Horizontal Mounting Method but I would like to have the vertical option with my current build. This case lends itself more towards being a Liquid Cooling Case rather than simply an Air Cooling Case. I am sure it can do both well despite not having Liquid Cooling components of my own. The panel to add those components may need some finessing when removing/adding. I had a wire being pinched that likely happened when the Modular Plate was first placed inside at the factory. Everything worked but, like with anything dealing with PCs, just take it slow when replacing the panels/parts/components.I hope this helps! Just take your time and do the research. Ask questions and plan your approach. Good Luck! Have fun building!

I was originally looking for a full tower but liked this case. Turns out is is not far off in size from my old Coolermaster Storm Trooper full tower case. It is big and heavy. I will list PC specs below for size comparison.Installation was easy, pleanty of room for cable management, along with tie downs and routing for the cables. Also pleanty of room for large CPU coolers. The vertical GPU mount will not work with most air coolers unless they are low profile, if you plan on using it then get an AIO.Fit and finish on the case is great, easily removable hinged side panels and the hinges are greased. Comes with quality fans already plugged into the fan/ARGB controller. The cables in in the case were routed neatly from the factory. I am not great at cable management and feel it looks acceptable.The only downside I have found is the functionality of the screen. It can work standalone without any software installed on your computer, but will be missing some fuctions. The software required works but can be a bit confusing, and as of right now it says there is no internet connection while trying to log in. Without logging in, some of the options do not work on the screen. Hopefully this is fixed soon.Everything has proper airflow with the factory fans, running benchmarks the GPU stayed below 80c and cpu below 60c. MSI AI cooling in the MSI Center app seems to work well, and you can set manual fan curves.I recoomend this case, it has a lot of space and looks great. It looks better in person than the pictures online.PC specs-CPU - AMD 5800x3dCPU Cooler - Be Quiet Dark Rock Pro 3Motherboard - MSI x570 Gaming Pro Carbon WifiGPU - MSI RTX 4090 Gaming X TrioPSU - MSI 1000w MPG A1000G

This case is solid, a builders dream. I really enjoyed building my rig in it. The ease of toolless aspects to get parts in and out. MSI nailed it with this case. The LCD screen is bright and vibrant. I loved the cable management aspects really made for a clean build. For my build I used the MSI MEG ACE X670E and have a 5080 and a 360 MM AIO. It keeps air flowing and enough space for everything.If you want a high quality case that is beautiful- snag this one!

The media could not be loaded. This will be my first build for my son.Cable management is cleanComes with four pre-installed fans.I like the ease of access with the lamborghini Style doors.I appreciate the touchscreen feature to monitor system temperatures, control fans, change ARGB colors, and even weather is nice.The case overall looks and feels premium.

Stated " Very Good - Tested and works great. Includes original box and cables. Ready for use. Good used condition. Light wear from normal use." 4 fans don't work, cable was cut display don't work. I can't see how it was tested. 8 hours into the build, contacted the seller and they seemed to be willing to work with me to make things right then they decided not to, They messaged me "want a refund" Undo 8 hours of work or buy a controller for $18 and settle for display not working. Bought the controller and settled But BEWARE of this seller and what their description of product !!!

Best case hands down I've owned so far. The layout to run everything is great along with being able to slide the PSU through the back instead of the side is a nice touch. Its very spacious considering the size difference between this and my previous Sekira 500X. The LCD screen and the chassis is very sleak while offering really good airflow. The only thing i miss that my Sekira 500X had was a removable top slide mount for my AIO. While offering modularity, Sleak design, Good airflow design, good layout for running all the wires to keep it neat this case is well worth the price compared to other brands.