Wera Kraftform 2054 Micro Screwdriver - Hexagon Tip Sw 2.0 / 60

As with everything Wera, a nicely made tool that is a joy to use. So much nicer than using Allen keys. These are amongst the most expensive small drivers but well worth the extra.

Wow what an excellent tool this is!

A fine screwdriver

Good quality as always

Used it to screw an m2 nut on a bolt holding a flange to the front of a model plane. The nuts are small and the shaft of the screwdriver needs to be slim to avoid catching the flange. The Wera was just slim enough to get access to tighten the nut. Quality is what you expect. The end of the handle rotates to make use more comfortable but felt a little loose. Hopefully, Wera quality will shine through and it wont be a problem. They are expensive at around £13 for one and you can buy a set of five nut spinners by Mannesmann for less than one Wera on Amazon. In my particular use case the Mannesman shaft was 0.3 mm wider than the Wera - not an issue for many uses but on model planes where access can be difficult small distances can make a difference. In my case the Wera saved the day but the recess for the nut is quite deep so I had to put six nuts in first to bring one nut to the top of the recess ready to be screwed on to the bolt. This is a bit of a faff and the recess in the Mannesman is much shallower so less fiddling about getting the nut just pointing out of the end of the driver ready to be screwed on to the bolt.

The screwdrivers themselves are fantastic. Made to last and fit precisely so don’t damage screws. The only issue I had was with Amazon’s delivery of a single piece. It was in a plastic ziplock bag in an Amazon card pouch and you could see where it had been buried under other items. The screw tip only being 0.12mm thick could have easily been damaged.

This single Torx 6 screwdriver costs more than some other complete sets of similar tools; but the key point is that this one actually does the job while others just deform when confronted with a difficult job. I own a lot of knives which use Torx screws as part of the assembly. Very often the ancillary screws (for example, for the pocket clips, which I despise) are Torx 6. Sometimes they can be very tight. I have had several cheaper drivers which just gave up and lost their shape when the screw didn't loosen easily. The Wera opened the ones that could in fact be opened. When faced with something which was just too tight, my strength gave out before either the driver or the screw itself did, so that the driver retained its shape and its availability for further jobs. Worth the extra money for the particular purpose.

Great, bought these because Rolex was trying to charge £70 for their version. Bought this and it’s perfect. Would recommend

Well made very strong for its size

Needed a 2mm screwdriver for electrical work in the controls field working in PLCs. This on is perfect. Well made screwdriver and a true non flared 2mm

Quality is there.

WERA is the best when it comes to screwdrivers.

チェコ産か知らんが精度はバッチリ。