Mowei [3+2 Pack for Galaxy S23 Ultra Screen Protector [Fully Support Fingerprint & S Pen] 3X 3D Curved Tempered Glass and 2X Camera Lens Protector for Samsung S23 Ultra 5G

Haven't done this kind of screen protector before, but after using Zagg and other film types for my last several Note series phones, I wanted something that wouldn't get dented and marred from using the s-pen as often as I do (digital artist by trade). I figured this would be much messier, but CAREFULLY FOLLOWING THE INSTRUCTIONS led to a nearly perfect install. I had one tiny bubble right under the middle that I missed until after curing. I was pleasantly surprised by how cleanly it removed, and I used a second one and it came out flawless. Edges had 0 excess to clean up, fingerprint reader worked perfectly, and does the s-pen (though I do will miss the little bit of drag film gives). After the first 45 second cure, I did put more weight on the fingerprint reader weight (a small stack of quarters) for the next 120 seconds, and didn't have to make any adjustments to the fingerprint sensor afterwards. I bought a Zagg Santa Cruz case for it (crystal palace was sold out) and was worried if they'd interfere, but the fit is *perfect* between them, maybe a little under 1mm all the way around and the lens cover for the back is a flawless fit with this case. Very happy.

I've used Whitestone in the past but this Mowei offered a better value at a slightly lower price point. The kit comes with everything needed including the positioning frame, adhesive absorption pads, stickers to protect the input ports, cleaning pads, UV adhesive, a weight for the fingerprint area, a plastic ramp to lower the screen protector onto the adhesive, and the protectors themselves. Instructions are straightforward but come with a caution that most issues arise from not watching the prepared video first. I strongly recommend that you do watch the video, it is helpful even if you have used UV protectors in the past. Of particular note, the curing time is significantly longer than in my past experience; perhaps due to a different adhesive being used. I followed the instructions exactly and had no issues at all getting this screen protector properly aligned and cured. Fingerprint registration was also straightforward. The real test for me was about how well it would work with a case. I was a bit apprehensive about the fit but to my pleasant surprise, it fit exactly perfectly with my Spigen NEO Hybrid. The screen protector is slightly curved but leaves just enough (and I mean precisely just enough) space such that it does not interfere with the case and the case does not "push up" against the protector as my old one did (creating a slight uplift of that screen protector). I really thought that the rear camera protector would be the place where the case would interfere but again, it very precisely and perfectly fit with my case. Overall very pleased with the fit and function. Looks like this will be my long-term goto for screen protection.

I've bought a similar screen protector with glue before called white dome so I thought, how hard could it be and gave this cheaper version a try. You know what they say, you get what you pay for. First of all, the instructions show a completely different set up than what was sent to me. The instructions said to put 4 foam bumpers yet there were only inserts for 3. The foam bumpers didn't send do their job! I followed the instructions step by step and still the glue went everywhere! When I mean everywhere I mean there was a thick layer of glue on the bottom of my phone that I had to scrape off with my nail cuz the wet wipe wasn't cuttin it. I even had to open another one of the packets that came in the box for one of the remaining 2 screen protectors to get another wet wipe but even then, lil bits of dried up glue was everywhere and was so hard to remove! Also, the smell of the glue.. after curing it smells like burnt glue. My phone still smells and I'm still trying to remove the dried up glue from the bottom and side of my phone. Good thing I took a lil piece of tape and covered up my speaker near my front facing camera or else that too would have been covered with glue. Do yourself a favor and spend an extra couple bucks on white dome. White dome, I'm coming for you. :'/ Rumor has it.. I'm still trying to remove glue from my phone and my phone still smells like burnt glue. :(

I like this companies product but they send you only TWO glue tubes and 4 screens. I had to get an entire new kit because my first one only had 1 glue tube left after I accidentally touched the phone and all the glue fell off before the screen went on I didn't have any glue. The second glue worked but then less than a year later it broke and both the protector and the screen broke even though it was in a heavy duty case. Because I had no remaining glue I had to purchase a new kit and that one only had one glue tube, the other was bone dry. Because I had bubbles with that first attempt I emailed the company per their instructions and they sent me out a completely new kit. It was aggravating because I didn't need the entire kit I just needed some extra tubes of glue! I have so many screen protectors but only one glue tube remaining should it break again.. It seems silly that I have 3 curing lights, 3 cases and 3 metal bases when all I really needed was one tiny glue stick! I did have to redo my fingerprints but not a big deal. I really like the companies products, it just takes a bit of practice to get it right. The video on YouTube by HighTechCheck is great other than it has an incorrect curing time of 2 minutes instead of the 5 minutes suggested by the company. The one supplied on the Amazon listing Is good, it just is a bit quick and bit difficult to pulse. The videos were instrumental in my success, so I would suggest you watch them. This is the best quality glass screen protector I have seen but all of them require a bit of skill to get it where you want it without bubbles. Edit: Oct 2023: The cover developed a star burst looking crack after dropping (twice) but it did protect my cell phone glass which would otherwise might have cracked so is still worth the money. I have 1 more so am hoping this one stays intact longer and I quit dropping my blasted phone.

Took a little time to get the front screen protector on given the steps to follow in the instruction video, but I was successful in doing so on my first attempt and overall happy with the product. The fingerprint sensor works perfectly after my prints were resubmitted and the s Pen works with the protector flawlessly. If you have the patience, and follow the instruction video, this is a great product! I will say, it does leave a bit of excess glue on the sides of the phone after installing but it was easy enough to clean off. The camera lens protector is an added bonus that comes with this product and is easy enough to install. It simply sticks to the camera lense, without any additional glue or curing.

First time installed, and it is very easy to install as long as you follow the video instructions. Glue covers the entire screen without out any bubble. Make sure to clean the cured glue on the edges after and not to expose the edges; otherwise you will see some white color around those edges. Wish that mfg could specify what type of chemical is for the glue, and how to clean your hands after. Right now, i just use hand soap to clean. Haven't had any chance to remove the screen and see how the glue and screen are came off from the phone. Will see! Overall it is a good product, easy to install, and don't have to worry about bubble or small dust like other traditional screen protectors.

This package is great and includes *almost* everything you'd need to get this screen protector safely and hassle free on your phone. For the most part, the videos shown on this page are helpful, but they do leave out a crucial component to set-up; you need to cover the speaker and remove your s-pen. While you can just use another sticker, it needs to be a very fine application as you don't want to interfere with applying the actual screen protector. The glue cures just fine with the UV light provided though it took me two times to get it "right". The first time there was a rainbow pattern around the selfie camera so I tried my best, waited 10 minutes, but still the rainbow pattern remained so I removed (did not cure yet), cleaned up the mess, and tried again. The second time I saw no visible flaws so began to follow the rest of the instructions with the weight but unfortunately the added pressure moved the protector back and caused a bit of a glue mess. I used the guide to hold the screen protector in place and a tissue to absorb any excess I could. I attempted to cure just the top of the screen protector quickly and remove the guide but somehow light bleed caused some very minor curing of the guide to the phone which was very unfortunate. I did my best and resolved the situation later with a bunch of alcohol pads, but first, I needed to continue to cure the rest of the glue. Here is where things just went south even more for me. I had accidentally cured my phone to the frame of the screen protector applicator. It took some force but I was able to pry it out and use another giant glob of alcohol pads to clean up the excess glue from the sides of my brand new phone. After inspecting everything thoroughly, I cured the sides, cleaned it all up *again* and was finally satisfied with the results. What should have taken 15-20 minutes took me about an hour unfortunately. TLDR; Cover your speaker, ready the absorbing materials for the bottom, and remove your s-pen. Best of luck!

I spent a while researching screen protectors for my new Galaxy s23 Ultra and decided to try this one since it came with 3 screens and also had pretty good reviews. I'm glad I did! It only took me one try and even though the application process wasn't perfect, the end product looks perfect. The process does seem intimidating but it's really not that bad. The hardest part for me was just getting the phone out of the contraption after the glue set for some reason. I'm thinking I didn't soak up the overflow glue enough and part of it glued to the phone. Oh well, either way I didn't damage my phone and it fits perfectly with my case and my phone is completely protected! And I still have 2 more screens to replace if this one ever breaks. The only thing is that my fingerprint scanner is kinda finicky. I'm not sure if it's due to the screen protector or not though since I didn't use it before. EDIT: It's been only a few days and now the edges are coming up and bubbling.

Brukar aldrig skriva reviews, men det här var så bra att jag var tvungen! Hade just fått tillbaka min Samsung efter att skärmen gått sönder och kände mig tvungen att försöka hitta ett skärmskydd som faktiskt sitter bra. Och oj vad det här var bra! Se till att se instruktionsvideon bara - för det är lite pillrigt att få dit det. Supernöjd!

Parfait, pas trop difficile à installer. J'ai réussi directement en suivant la vidéo. C'est facile, il faut juste faire attention à bien mettre la colle au centre de l'écran. Quand on pose la vitre, il faut attendre que la colle se diffuse partout. On peut même pencher un peu le téléphone une fois placé. C'est nickel et le lecteur d'empreintes fonctionne bien, mais j'ai dû reparamétrer mes empreintes.

Es una mjy buena opción para proteger la pantalla curva del s23 ultra, anteriormente use una de dome glass sin embargo se me empezó a despegar y por alguna razón ya no la venden en Amazon, asi qué me di a la tarea de buscar una similar y encontre esta, al principio dudé ya que en cuanto al precio es prácticamente la mitad de lo que me costó la dome glass, aun así me arriesgue y la verdad muy conforme con el desempeño y practicidad en la instalación, lo único en que debes tener mucho cuidado es en tapar los botones, bocinas, micrófono etc y lo mejor es que trae 3 cristales, apenas tiene 15 dias que lo instalé y de momento todo suoer bien

Although I had some teething problems fitting the protector, which I will put down to human error, Mowei's no quibble guarantee enabled free of charge replacements to be sent. This is customer service at its best, a thing sadly lacking in today's market place

After dropping my phone twice, I had two cracks in the screen on my Samsung Galaxy S23 Ultra. I had damaged the top third of my screen with two cracks on both the left and right. On the left was a small but deep chip, and on the right was a large crack stretching from the top near the camera down by about a third of the screen and across to the right edge. I was considering sending my phone for repair but decided to give this screen protector kit a try first. The installation video explains exactly what to do and it helps to have this nearby on a laptop to rewind and pause as you apply the kit. Everything is included for cleaning, applying the glue and finishing with the UV light. The two cracks on my screen are completely gone and the screen protector is almost completely invisible, apart from a small lip at the very bottom of the phone. There are no bubbles, it applied perfectly straight thanks to the guide tray, and it's super clear. Once I re-calibrated the fingerprint reader, this works flawlessly and there is no impact in the touch screen sensitivity. I did not have to enable the sensitivity feature in the phone settings. I don't normally leave reviews but this kit was particularly impressive. To think I nearly spent £200 odd on replacing the screen when this kit cost me less than £20 and done the job perfectly is unbelievable. The camera protector is an added bonus and actually looks quite smart. You would think it was part of the phone's overall design. Would I recommend? Without hesitation.