NAGA PETG Filament 1.75mm,Tough & Durable 3D Printer Filament,Blue PETG 1kg Spool(2.2lbs),Dimensional Accuracy +/- 0.02 mm,Fit Most FDM 3D Printer

This is my first review and I've had Amazon for over a decade, but wanted to share some info in case anyone gets discouraged trying to print with this. I've had my Ender 3 for over three years, and this was the second roll /brand of PETG I've used , I went in over confident after having dialed in settings for Sunlu PETG rather easily, this is a different beast but very good once you get settings dialed in. If you haven't don't it yet and have a bowden setup, you should upgrade to a Capricorn tube and get after market bed Springs and adjustment knobs, the higher nozzle temp will melt the stock tube, and the factory Springs and adjustment knobs can /will work loose over a long print (I found out on a nearly complete two and a half day print when a rear knob popped off and shifted the print). I'm running a 0.6mm nozzle, bed temp 90, nozzle 240-245, retraction 35, reduced fans to 60 at the third layer, they're off during the first few layers, and I've been able to pull 70mm/s print speeds with these settings on a glass bed, but still using painters tape for extra adhesion insurance. For the price of this filament I'll definitely get more, I've only used the gray so far, printing with rafts and tree supports, different colors will likely need adjusted settings, some colors retain heat more than others, this filament likes it hot and you don't want the layers cooling too quickly, I hope this helps some people with settings.

NAGA has a great PETG. I had ordered a roll back last year and used it and it didn't work out well. I contacted NAGA and they promptly got back to me and done everything in there power to assist. Wound up sending me a replacement free of charge and the new roll prints as great as they should. You can't beat this filament. Delivers in a day or 2 comes in a vacuum packed package and the print quality is amazing.. it's the same if not better than some of the big name brands. I definitely recommend NAGA to anyone with a print farm all the way to the beginner.. thanks

Update: seller reached out and sent another roll and it prints better than the first but I'm seeing it works better on prints with a smaller thicker base than with a large thin print (I purchased this for making fan grills but will use it for other random prints instead)I print mostly in petg and this is by far the worst I've used. It doesn't stick to the bed well no matter what I do. Never had adhesion issues with any other brand. Not buying this brand filament ever again.

Great PETG for the price! Once dialed in, this is my go to PETG.

I was suspicious at how low it claimed the recommended printing temp was on the spool (210-230). Very low for PETG so I decided to print a temp tower going from 260-220. Almost made it all they way through until it was just spaghetti.Anyway, print at 260 or regular PETG printing temp for you.

I'm on my 3rd roll of this brand of filament and I have not had any issues. I print at 230 on the hot end and 80 on the print bed. I print on a piece of glass and use magigoo and as soon as the print bed temperature cools enough the printed object comes right off.

Had no issues printing with it, good cheap petgFeels stronger than other prints, did some research and pink plastic is apparently stronger than most other colors, not sure if this is true here but I definitely trust this filament

First off, it's shiny, but it's PETG, not PLA. I was hoping for more of a dark olive drab, but this is more like a fresh Spanish olive. It's actually a pea green. Other than that, it's good PETG; I've had good luck with the NAGA filaments and will buy other colors again.The only other problem I have is that there was a section of the spool that got broken at some point, so it won't work with my Bambu AMS. It was boxed well, but Amazon has been very inconsistent on how they box up what I order lately. I even received a spool in a bag the other day ("Just like a box!" written on it..... nah). I've received a few boxes with the carboard spools dented up as well as this PETG; haven't worried too much about it until now as the spools work fine on a spool holder, but now I'm needing intact spools for the AMS.

Se funde bien

El CARRETE SE ROMPIÓ Y LA CAJA, TAMBIÉN TRAE UN POLVO BLANCO NO SE SI ES POLVO O ANTRAX