ELEGOOPLA Plus Filament 1.75mm White 1KG, PLA+ Tougher and Stronger 3D Printer Filament Pro Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs) Fits for Most FDM 3D PrintersCarbonfree Certified

This is by far the best filliment in its price range. I have used pla filliments ranging from 10-80$ per kilogram and, despite the price, this is among one of the best brands of pla I have ever used. Ellegoo filliment is not perfect, occasionally I have issues with under extruding but this can be easily fixed by creating a custom filliment profile for each color of Ellegoo filliment which takes about an hour of print time and half and hour creating the profile. Ellegoo filliment works best dry but you can still get surprising results if the filliment is left out of a dry box.After a bit of testing and tuning a filliment profile I have able to nearly eliminate stringing (when bone dry). The color of the filliment remains vibrant after printing at normal temperatures, I print pla at 220c and I did tests from 215-225c. I have ran through about 6 roles of Ellegoo filliment and I have never had a clog or obstruction. The one downside to the roles of Ellegoo filliment I used was the diameter of the filliment, it was not always within .05mm. This was not a huge issue but for about a meter of filament (per roll) I had streaks in the walls of my prints, this is why I use Ellegoo filliment mainly for drafts or prints That don’t need to look perfect.

I originally opted for an Elegoo filament as it was on sale and pretty reasonably priced, so thought I would give it a try. I was glad I did, as this stuff has been great, very little to no stringing, very accurate prints, oh and did I mention the great price. I have a Prusa MK4 and this stuff runts through it like it was meant for it. I have started ordering other colors from Elegoo (again good stuff and very good pricing) and some filament in pairs.As an added bonus I really like they use cardboard for the holder, it pains me every time a standard filament role goes empty and I have to throw away the plastic holders, so I was very happy to see a company take the green initiative and replace the plastic holder with cardboard.So as long as they keep the quality control up and the price down or reasonable, I'll keep buying what they are selling.

I don't have a whole heck of a lot of experience with 3D printing. I've only had one at time of writing for about 6 months. I purchased a couple different brands of PLA but I was definitely still learning, so not too sure what to say as far as comparisons go.I kept buying Elegoo because that's the brand that made my printer. They're also one of the cheaper filaments. Once I got my printer dialed in and watched plenty of YT videos on how to correct mistakes for beginners, I have had zero issues with this filament. Actually, once I got a drying box I had no issues. I live in the Pacific Northwest, so there is always a lot of moisture in the air. I will continue to buy this filament, and I have zero complaints about it.

The filament has a nice color and prints great. Did not need to change any settings. This is now my pla of choice.

Overall, the price was great, layer adhesion and tensile strength is great, but the thermal range labeled on the spools isn't particularly helpful, as the actual usable range for the filament is pretty fine, the white was poorly homogenized, creating random layer issues that I didn't have with the other filament colors, and burned at the temps listed, leaving brown spots. Did extrude and retract well, good packaging so it was nice and dry, and the spools were neatly coiled from start to finish and looked very nice, no tangling.

I used this for a planter that I wanted to print and it did an amazing job. When using this be sure to run your print head at 10C higher than you normally would and there should be no issues at all.I ran my print at 225 and I had no issues though the entire print job and on the first try with the filament.Elegoo has the best filaments that I've tried so far.

I use this filament on my Anycubic Kobra 2 3D printer. I think it's a better value than AC's filament. I will continue to purchase this filament.

I have not printed PLA for probably 5 years now. I switched to ABS and more recently ASA. I had my machines dialed in for those filaments, so I knew what to expect every single time.I am prototyping a piece right now meant to fit in a certain place with complex curves, and I was just burning thru all my ASA with new revision.I finally decided to see what some of the cheapest filament I could get same day. This 2 pack of white PLA+ was it, and for a great price.I popped it in my AMS and changed my X1C to a PLA profile and the very first print was perfect. Like unbelievably perfect. I'll proabably pick up a few more rolls just for that reason.My only complaint is the white is not white. As another reviewer noted, it is a cream color. For what I am using it for (prototyping) it does not impact me, but if someone wants a pure white this filament is not it.

The media could not be loaded.  A pesar de la recomendación de 60-70 mm/s, lo uso en una NEP4 imprimiendo a 250 mm/s de infill y 150 de pared exterior, es más resistente qué el PLA normal en cuestión de estrés mecanico, flexibilidad y temperatura. Se derrite fácil a la temperatura recomendada y el color es fidedigno, llegaron en vacio correctamente y en una caja de carton que incluye los 4 kg. No lo he probado para maseteros. Naranja y amarillo no lo he probado hasta ahorita pero están hermosos.

Hasta el momento es el MEJOR filamento que he comprado, y he comprado los mas caros y este siendo muy barato tiene la misma o mejor calidad que otros mucho mas caros como los Hatchbox, tiene un acabado mate de alta calidad, super facil de imprimir, y un precio excelente, y encargue varios rollos mas, muy parecido a PLA premium, pero sin el inconveniente de costar de 800 a 1000 pesos por kilo, ademas de que el carrete es de carton lo que lo hace mas ecologico

muy buen material, buenas impresiones en una ender 3s1me gusto que el rollo es de cartón, eso ayuda a la ecología

El filamento me resulto muy util y facil de calibrar. Ya me acabe un rollo y no tuve problemas de obstrucciones y detalles con hilos realmentenminimos. En el paquete de 2kg, super buen precio (al menos cuando los compre)

Por fin un filamento a buen precio y de buenisima calidad , no duden en comprarlo !