UNI-SHINE 4 Inch LED Fog Lights Halo Ring Work Light Compatible with Jeep Wrangler JK Unlimited JKU 2007-2018, with White DRL Amber turn Signal Front Bumper Replacements DOT Approved

The fog lights are great, very bright and has a nice light cut off. If I wanted to I could have used them as my headlights! But... The driver side had moisture in it so I had a replacement sent out. The replacement also got moisture in it as well but the Their customer service is really nice and dedicated to make things right and making sure this gets fixed!

These lights bolted right in and work great. They come with a different style plug than a Jeep Jk so that has to be cut off and wired in. If it was truly plug and play with no wire cutting it would be five stars.

I installed on a 2007 wrangler JK without any need to cut or add anything for the fog light feature. So I believe it will be the same for models until 2009/10. For higher model years they do provide an adaptor plug with open end wires which may connect to your jeep fog light wires. For the DRL to work you may need to get your own wires as the supplied wires are not long enough to run to the fuse box and are super thin. TIPS from not a professional: (1) For the DRL to work I got a fuse tap and connected to the cigarette lighter fuse slot which takes a 20 AMP ( just do a search to see the location}. (2) I connected the fuse tap in the fuse box where the cigarette lighter fuse was with the fuse tap wire facing inside the fuse box. (3) I connected the original cigarette lighter 20 AMP fuse to the bottom slot of the fuse tap. (4) I added my own 10 AMP fuse to the top slot of the fuse tap. ( 5) For the Amber turn signal to work you will need to slice/tap into a solid White wire where the original turn bulb connects. There are 3 wires: White located on the left, then a middle wire and a solid Black. If you ignore the middle wire and the black you are good to go. Don't get overwhelmed by the steps. If you follow the steps one at a time you should be ok. Unfortunately I didn't find any straight to the point 2-3 minute video.

I like these lights and they look great, unfortunately one of the fog lights wasn’t water tight and was taking on water until it finally gave out and doesn’t turn on anymore. I can’t figure out how to contact the company to hopefully get a replacement.

These were a pretty standard installation to upgrade the old lights on a heavy aftermarket trail bumper. In my case, the installation was literally as simple as snipping zip ties and unclipping the old lights, and adding new zip-ties before clipping the lights to my factory JK harness. (True, I ended up doing a little rewiring because the prior owner managed to short out one of the wires, but that's another story.)Nice and bright! I only set these up as fog lamps; didn't attempt anything fancy like turn signals or daytime running lights for the halos. Although, I'm so happy with them as improved foggies that I just might connect the DRLs afterall.Nice lights, as advertised.