LE LEMATEC Portable Sand Blaster Gun Kit, Pneumatic Tool for Rust Removal

Needed to clean up the evaporative cooler and this worked great. As others have said, need to refill it a bunch of times if you have a large job. Other than that, it did what it needed to do with no complaints from me.

Sand Blaster as described and easy to use. My project was to blast outdoor aluminum furniture in preparation for painting. I used Black Beauty Abrasive Blast Media Extra Fine abrasive 30/60 mesh. In hindsight I could have used a larger abrasive. If you have a large project you'll be wishing the hopper was a bit larger - only means more refills. Note, my compressor was on the smaller size, being a 1.6 hp, 20 gal tank, and 4.0 SCFM @ 90 psi. I did not have any problems at all using this blaster with the hopper. As my air started to run out, my abrasive in the hopper also ran out. After stopping and refilling the hopper, the compressor filled back to full pressure (120 psi).

Was looking for better results but that could be my air compressors fault 100-120psi I think rusty jeep project might be compound to small portable can't really aim down but small projects is great with right compound and psi. Good price .

I needed to sandblast some small parts and antique tools that had rusted. I took them to a local machine shop that does that sort of thing and they quoted me $150.00. YIKES! So I went to AMAZON and found this little device. I already had a air compressor so I ordered this sandblaster. It works great for cleaning up small projects! I realized that I didn't have any blasting medium when it arrived. NO PROBLEM! It comes with a screen. You can use it to sift the fine sand in your kid's sandbox to do your little jobs Bigger projects - I would order some blasting medium togo with this great tool. It requires about 90 Psi from your compressor to really be effective, so you will need an air tank with some volume to work properly. A portable DeWalt with two tanks like the one I have would work fine (or larger). For this price, this is a handy tool to have in any workshop. A great gift for the handyman!

Didnt not work as advertised

It seemed like the nozzle got continuously clogged. The compressed air caused moisture/condensation on the nozzle, and the sand blast material would get clogged up or something?? I tried about 4 different types of sand and soda substrate to put in theb product. It would blast out about 2 seconds of sand and then just be air after that. I'd try to tap it in the table and it'd work another 2 seconds and stop. VERY frustrating.... Not worth my time. Returned.

Used to sand hard to reach details in furniture and it did the job well. Much better than sanding by hand. My husband warned me that this would make a mess, but I had no idea. It took a lot of product for a very small area, but also would admit some of that might have been user error. It never clogged up on me, and I have other projects I am going to try this on with a different media to see if it works a little better for me.

Not many real/decent reviews on this. I was at first skeptical because I didn't have any media to try out on my Brembo calipers. I had baking soda in the kitchen and gave that a whirl. Did absolutely nothing. I was very disappointed. Read online that someone tired salt. Gave that a whirl, nothing.... Mad after reading other reviews and still optimistic I didn't give up yet. Not having a Tractor Supply or Harbor Freight near by, I decided to do what everyone says not to do...I went to Home Depot and bought play sand!!!! **I do not condone or am advising using sand because it can cause serious damage to your lungs from the silica** I figured it was worth a try and only $4 for 50lbs and right across the street from my house, why not. The result was surprising!! It made me start to believe this gun. I think a big problem is that the media control valve is misleading. It says on, or off. Never having sand blasted before I didn't know that regulating the amount that comes out of the gun does make a difference!! When I first started with the baking soda and salt, it was wide open. Tried salt again with the valve only slightly open and it actually did some removal. As you can see from the pictures this gun did its job. The sand is a little but too abrasive for the alluminum but IT WORKS!! Using 90-120lbs of pressure this gun ABSOLUTELY WORKS. Use the right material and the right amount of air to material ratio and you have yourself an at home sandblaster. Now, the next step is to get non harmful abrasive to my lungs and an open area to complete the job.

Haven’t had a chance to use it yet but seems functional for its purpose with it being gravity fed.

Works great. Excellent for small projects.

Excellent little tool, used for walnut blasting and did the job, but needed to be on max, ordered the extended nozzle as inlet intake blasting on car.

Llegó antes de lo que Amazon prometió , además la calidad de la pistola se ve muy buena, ahora que la use pondré imágenes de un antes y después del sandblasteo , la adquirí por qué voy a hacer una restauración de un auto

nice work