Hyliter Epoxy Resin Kit, Upgraded 32OZ Clear Resin Epoxy Food Safe BPA Free Easy Mix 1:1 Casting & Coating for DIY Molds, Wood, Jewelry, Table Tops, Bar Top, Arts and Crafts Supplies

Very easy to use as it’s a straight 1:1 mix, as always the more precise you are with your measurement the better the finished product. Mine was used for a pretty thin background, ice effect and worked beautifully. Hardened to a glassy finish and had zero sticky spots or bubbles. It remained workable for a decent time, enough time to get it exactly how I needed it to be. Overall great product I’d order again.

I've used a lot of different brands of epoxy and what sets this apart is the inherent lack of bubbles. I bought it to coat canvas art but it's way too thin for that and always leaves divots all over the surface no matter what you do. After ruining a few I set it aside for a while. I pulled it out to make some resin charms and for this use, it produces good results with no voids or bubbles. I'd buy this again now that I know what it's best use it.

This stuff is really great! I’ve never used resin before but always wanted to try- if you also haven’t tried it before, this is the one to pick.The picture I added is of my counter- this stuff is so clear you can’t even see it unless you look for it or light shines off it (which it does, it’s very shiny) (the weathered broken concrete look is intentional)This was the perfect product to protect my counter- an 8’x2’ thin concrete slab- I ordered the two 32oz bottles and I think the only thing is I wish I got more- another set of bottles or even just half of it would have been better, because it didn’t quite give me the full coating thickness I needed- it’s definitely not the fault of the product, I just didn’t get enough. And even despite that, it still performed waaaaay better than I expected. It is rock hard in less than a day, not even slightly tacky or sticky just smooth and shiny and perfect. I’m paranoid so I’m still going to wait to put my equipment back but I could easily put them up right now likely without issue and it’s only been 18 hours since I poured it.Easy and fun to mix, turned out better than I could have hoped for- just order more than you think you’ll need.For my project, I made sure the room was above 70 degrees F as recommended - it was actually at 77 for most of the night - and I mixed half and half at an exact 1:1 ratio, poured, then mixed the other half. These steps are crucial for a good end result.I will be getting this again for many future projects!!

The media could not be loaded. This was my frist time using epoxy resin and i couldnt have gotten a better one. I love how the instructions were easy to follow. Loved that they have all the tools you need for your project. I loved how the smell wasnt as bad as i thought it would be. But i would still recommend using protection for your face and hands and maybe opening a window.When i pour the resin into my molds it was easy and i loved how there was hardly any bubbles when it cured. I will recommend 100%

This is a decent resin bundle for the price. Your order comes along with all the extras you need to get started with resin. This does seem to be a thicker resin than the resin I normally use. That said, you could be more prone to bubbles or flash curing if you try to use this resin for the wrong project. I found the pot time to be about 30 minutes before it started getting warm. In my opinion, this resin would be great for smaller projects (as listed on the bottle it isn't reccomended to mix more than 6oz at a time) or for doming a finished project! The squeeze tips for the bottles would be good for pouring very small amounts of resin. The guide it comes with covers pretty much any scenario you could face while using resin but here is my issue. This guide has conflicting information that might be confusing for someone first using resin. There are multiple working times listed, conflicting pour depths, and different curing times. I would not reccomend using this resin for large/deep projects (the guide lists you can pour this resin 2-4in deep) as you would more than likely end up with a flashcure. The guide lists this resin application as a coating resin not as a casting resin. The guide seems to have been put together by picking sections from other how to guides (the guide mentions two other resin companies Alumilite and Pro Marine Epoxy). Most of the other information is helpful though! All in all I would reccomend this resin to be used for doming or very small projects!

It looks pretty thick after mixing but it will seep through tiny crevices like water. It took a couple coats to seal up. Looks really good as I had hoped it would.

Nice resin, very few bubbles. But, I didn't like how long it takes to cure!!I am unfortunately having to edit my review, I've my 3 items with this and 2 of them have cracked or broken. It's been 48 hours and 1 is still not cured!

I use this resin for trays, coasters, bowls, clocks, wedding preservation projects and its so clear. Very easy to use. Make sure you mix resin at least five minutes. Minimal bubbles after you pour. Cures wonderfully. It’s the best resin I have used.