Advanced Silicone Caulk for Kitchen & Bath, Clear, 10 fl oz, 1 Pack

I used the GE Advanced Silicone Caulk for Kitchen & Bathroom (Clear, 10 fl oz) and I’m really impressed with the results. The application was smooth, and once it cured, it created a clean and solid seal. I applied it around some cracks in our bathroom where tiny gaps had been letting ants and other small insects in, and since sealing it up, the problem has completely stopped.What I like most is that it’s truly waterproof and doesn’t shrink or crack like other caulks I’ve tried before. The adhesion is strong, and it blends in nicely since it dries clear. It feels durable and gives me peace of mind that I won’t have to keep reapplying every few months.If you’re looking for a reliable silicone caulk that holds up well and actually keeps pests out along with providing a waterproof seal, this is worth it. A little effort during application makes a big difference, and the results are long-lasting.

Works great, not super odorous like other sealant. Works great on keeping the water away from the wall & doesn’t flake off

I never thought I’d be this emotionally attached to a tube of caulk, but here we are. This caulk is the unsung hero my bathroom didn’t know it needed. It’s like the superhero of sealants! It swoops in, sticks like it means it, and refuses to crack under pressure (literally).Application was smooth, it dried clear, and now my tub looks like it went through a spa day. No leaks, no peeling, no drama, just pure, watertight commitment. Honestly, it’s more reliable than most of my houseplants and some of my exes.Fantastic for keeping my bathroom sealed, shiny, and scandal-free.

Bought to install a shower and a bathtub enclosure, with tile walls. Not much to say other than it is a good product (100% silicone caulk, in clear). I have used it before, and it always perform as intended, without leaks or cracks. You don't need a big opening at the nipple (I usually cut it slightly slanted). It flows out easy and you do not need to apply a lot (One pass with a thin film will do). Each 10 oz cartridge will cover about 50-60 linear feet, and it sets in less than an hour (about 30 minutes). Thank you.

Wowza this stuff is good. A little pricey but it's worth it compared to the cheap stuff. This is strong enough to hold up my undermount sink without any mechanical fasteners and then also used it to seal the perimeter from moisture. Easy to remove it you just let it dry and peel it off. When uncured it's really messy and just spreads all over.

Agh, this stuff is super annoying to work with (the physics of its consistency are tricky) and smells terrible, but it’s all there on the label. I had used plaster-esque caulk previously, not this clear silicone, so I had no idea how different the two were. But it seems to have sealed pretty well and once I got over the learning curve and ventilated adequately, it was fine.I will say, it’s SUPER invisible when dry; so make sure you clean out any crevices *really* well or the grime will be hermetically fossilized forever. Very glad I was thorough, because I’d anticipated more opacity.So far it seems to be holding up well. It also bonded really nicely to itself. I sealed a tub crack where it met the shower wall & kept getting all grimey. This has been a major quality of life improvement, in terms of cleaning.

Excellent for sealing airholes. I used it when making a homemade filter boxes and I got it almost airtight. More talented makers will make fine use of it. Very durable, but does not paint well so be accurate with it.

I had water under my sink and needless to say I needed to replace the silicone, used a putty knife to remove all the silicone, cleaned the area with a brush and rubbing alchohol then some compressed air and a heat gun to ensure it was completely dry which made installing new silicon with only 1 hour downtime total for a sink thats currently in use. This is crucial as we could not wait 24-48 hours without using the sink.Make sure to pierce the tube with the metal rod on your caulk gun after cutting open the nozzle, otherwise yea its not coming out and will come out the backside.Very low to no odor, it really is water-ready in 30 mins but it does take a full 24 hours to cure so be gentle with it and dont use any harsh chemicals until then.Was also enough to do my sink, the backsplash area, multiple large portions of my tub and still have 1/3 left.

Good product, good sealer..

As described

Excellent waterproofing, what to say more.

The best and dries fast ish

Great product. It worked better than other brands I’ve used in the past.