Lunsom Automatic Shift Knob Metal Car Shifting with Push Button Aluminum Alloy Shifter Lever Handle Long Stick Gear Head Fit Most Auto Transmission Vehicle (Blue)

Well made. Durable. Annd...looks good too.Note: This shift hanlde is all metal. On hot days it will absorb heat and sometimes be hot to the touch for a short time after you start driving if you have parked in full sunlight.Options:(1) Lace a leather sleeve around the handle.(2) Buy a set of large (good looking) motorcycle handle grips and slide one onto the shifter.(3) Cut a length of foam AC insulating tube and slide it onto the shifter.(4) Leave it alone. Its not a big deal. Why cover up a good looking shifter? The gray option looks a little like gun metal.UPDATE and..Still looks brand new. Atill works great!And on another topic about this itwm...I have been asked this question about its compatibility with at least 10 or 15 vehicles. Unforrunately, since I have never owened any of them I can't be sure of the answer.What I can say is, that using Amazons Automitive search function works. This is different from the search at the top of the page. You must enter all your info (Make, Model, Year, etc.). The system will list the components you ask for and tell you either "This will fit your ...". Or, "This will not fit your..."This is how I knew to order this item. It is a well made and good looking replacement for an Green Automatic 2000 Honda Accord EX.I have used this function successfully for several parts needed for different vehicles. Only once did it fail when it said that spark plug wires would fit the Accord. This was incorrect because the car uses coils.Obviously, the plug wires were ignored in favor of the coils which were also in the search results. They were bought and installed with good results.I'd rather not guess and send some Gent, or Gentress the wrong answer. We all know how frustrating it is to get a part back to the shop (ie. Garage / Shade Tree) only to find out it doesn't fit.So, the best I can offer in answering questions about whether this item will fit a particular vehicle is...Use the Amazon Automotive search function to find out."That is alll."

Well built and the feel is great. Adjusting it is easy and to me it works better than the original.

I went to put this shifter on my Jeep. It slipped down about halfway, not far enough to shift my car. And is now stuck and will not come off. Also did not come with instructions but should have been easy enough based on instructions in the details. I did exactly as it said to. Now if we cannot get it to come off I will need to replace the whole mechanism. Either way i still won't have a new shifter that i obviously need! VERY ANGRY!!!

Installed in my 2009 G37x Coupe 7AT because my OEM knob is cracking and the paint is coming off. Fits well enough, as the other reviews specified it does take some reworking with the rubber adapters, and the spring has way too much tension so I cut some of it. You will also have to take off the shift boot off in order for it to fit, because the plastic piece on the leather OEM one is not round and will not fit over this knob so it will bunch up and jam because of the length of the knob. I've ordered an aftermarket boot, but don't expect the stock one to work. You get what you pay for, it's a 17 dollar shift knob, don't expect it to be phenomenal, but it looks good and has good weight to it. I also had to put some grease on the button because of the button scraping against the metal and the noise was annoying.

This is literally what you pay for lol. Don't expect high grade metal or finish, but I will you the seems of the threaded portion are non existent and it's overall well made. I noticed that with the package it gave no instructions, but it's pretty simple and straight forward. I put this on a 2010 Chevy Cobalt this is the 4 speed automatic. Installation took about 30 mins give or take cause I couldn't figure out the orientation of the pin needed to engage the shifter. Any Cobalt 2005-2010 will have a white or black pin inside rhe auto shifter handle that will need to be installed I'm the new handle. I just tapped it and it fell out. That pin will have a fraction circle side and a barbed hook side the flat side goes downward inside the new handle. Then you place the handle on the shifter and this is where I got confused.. This handle has a button atop of it, but when I got it secured I noticed I never had to press the button. You see, this isn't a bad thing for me or maybe others cause I can go between gears without pressing anything now and I love that! It's so smooth! But what gets me is the button looks tacky as hell, and it's like I already this making it kind of ricer, but that button is ugly! So I'll be changing to a different one soon, but this one did the job! It's clean for any young kid and their first auto car they fix up and make unique to them!

Great shifter replacement. Works well and feels better than the original part. Two 👍s up! Thanks! Button works well, too. Took me about 10 minutes to install. :)

Fit perfect on my 1999 Acura Integra. Definitely improved the look, but as the stock one has a side push button this just made it worse ergonomically.It comes with some set screws which go into the three holes on the handle, that's what holds it in place against the pole of the shifter. It gives it a pretty firm hold. The thread size for this knob and the thread size on the shifter pole on this car are actually the same so I could use a screw to go into the pole along with 2 of the set screws for an even better hold. I didn't do that though because it would sit higher than I want it to be.The button is hard to push down and and is quite noisy as it comes, but if you take the spring out and cut it shorter it reduces the tension and makes it much easier to press down. To get rid of the noise I just put some grease up where the spring is, along with a bit on the sides where the button rubs the knob since that also makes a bit of noise. I didn't use any of the rubber pieces included as I wanted the shifter lower and it worked perfectly fine with the way this shifter works.

気に入る長さでキッキリ固定でき大満足です。

取り付けも簡単で何よりもプッシュ式ノブで難しかった延長出来た事が嬉しいです。

トッポBJに装着。説明書がなくても簡単に装着できました。多少の加工、調節は必要ですが、とてもいい買い物でした。

使いやすいですが六角のいもネジの山が弱いです。強く締めるとすぐなめてしまいます。

写真よりもやや見た目は艶がないです。梱包の箱はまぁ普通の下で、ボロいですが、中身はちゃんとしてます。取り付けの説明はないに等しいので車好きの方なら簡単に取り付けが可能です。夏は熱くて火傷まではないんですが注意してください。個人的には値段が安いので星３つです。