FILA EPOXYOFF, Epoxy Grout Haze Remover, Effectively Removes Epoxy Residue, The Product Can Be Applied on Vertical Surfaces, 1 QT

This project was my first time using epoxy grout. I wasn't as careful at cleaning up as I should have been and when I came back the next day the floor was covered in haze. I found this product after some searching and decided to try it. I poured it out and spread it evenly over the floor with a paint brush, let it sit for 30min came back with a floor scrubber and then mopped the whole floor 4-5 times with warm water. No haze left at all. This stuff is awesome. I did notice a smell not a bad smell and not to strong but I don't have a sensitive nose so it may be stronger for others. For reference purposes I was covering a 200 sqft office and used just under 2 quarts. (Be aware this cleaner is very slippery on tile)

Effortless removal of epoxy grout haze. We used a paint brush to apply the odorless gel to small sections of our shower floor at a time, waited the suggested 30 minutes and lightly scrubbed over the tile with non-scratch pads. The epoxy grout haze easily came off on the pads and then rinsed off the pads in warm water. Then we used a soft brush and water to rinse the product off the tiles. This product worked like a charm. Would recommend for removal of epoxy grout haze. You won't be disappointed.

We had a thin layer of grout haze over our new kitchen backsplash and it wasn’t super noticeable other than they were no longer shiny. We followed the directions on the bottle, used a paintbrush to apply and let sir for 30 min. Used a Scotch-Brite® Zero Scratch Scour pad we bought on amazon and scoured the tiles. Cleaning the epoxy off was a little difficult (used a few damp old rags). But my backsplash is shiny once again and im thrilled!

This stuff is amazing. I have had this grout haze for years and nothing I’ve tried before this worked. Not finished as it does take some time. You have to wait 30 minutes after application. Used a scrub sponge, scraper, and a wet cloth to get up the residue. Included the before and current after pic.

awful didn't work at all would not recommend

It says that I can use it for cleaning up Resin as well so I will do it but I still have a hard time getting it to work for the Resin.

We had a ceramic tile tub surround installed with epoxy grout that left a considerable amount of cloudy haze on the tiles. After two months of unsuccessful attempts to remove the haze, we ordered Fila Epoxy off. The entire application was completed by one person in less than a day. Directions for use were followed exactly -the gel consistency proved very convenient and easy to use for the vertical shower walls and wasn’t messy. There was very little odor and it cleaned up beautifully . Our bath is now haze free, looks wonderful and will be a pleasure to use.

Promising product, but for heavy-duty grout cleanup, be prepared to do several applications in order to get all the grout off. I originally thought I could grout my outdoor tile myself, but it didn’t go as planned. I ended up with grout smeared all over the tile that I couldn’t remove. This is the second product on Amazon I’ve tried. At first, I let it his product sit on the tile for 30 minutes and tried scrubbing, but nothing came off. After lightly wetting the tile, I managed to remove about half the grout. I’ve attached a picture showing the before and after from one treatment. I plan to reapply and keep working at it until I can get it all off.

Does the job and gets rid of stubborn residue

Not much to say only that was very dissatisfied that the product didn’t work at all followed all instructions even applied a second time but no result