

🎧 Power Meets Precision — Amplify Your Audio Game
The Fosi Audio V3 is a compact yet powerful mini stereo amplifier delivering up to 600W peak power to 2-8Ω speakers. Engineered with high-end TPA3255 Class D chip and premium Japanese and German components, it offers exceptional clarity with ultra-low noise and distortion. Its innovative full-body heatsink and vent design ensure efficient cooling for reliable performance. The amp supports swappable 8-pin dual op-amps for customizable sound profiles and features a volume-controlled pre-out for flexible audio setups. Ideal for desktop, bookshelf, or home theater use, the V3 combines minimalist design with audiophile-grade quality, making it a must-have for discerning millennials seeking high-performance audio with a sleek footprint.





















| ASIN | B0C36S8DCT |
| Best Sellers Rank | #7,772 in Electronics ( See Top 100 in Electronics ) #23 in Audio Component Amplifiers |
| Date First Available | May 5, 2023 |
| Item Weight | 2.51 pounds |
| Item model number | V3 |
| Manufacturer | Fosi Audio |
| Product Dimensions | 6.54 x 4.13 x 1.38 inches |
J**H
Great little amp for the money.
Ordered the Fosi V3 to replace a Fosi 20a I had purchased some time ago. The main differences are, the V3 is a more simplistic setup, promises more power per channel, and uses high quality parts internally. It can come with either a 32 volt or 48 volt power supply. Opt for the 48 volt power supply, you will not regret it. The larger more powerful power supply will get you higher volumes with better quality output On the back side of this unit are connects for a pair of speakers and an analogue input. The older Fosi 20a just did not have as much power particularly with only the supplied 24 volt power supply and fell short driving my Polk Atrium 6 speakers at loud volume. Now, I am using this as a garage system. Hence, the reason I chose to go on the cheap with this system. But....the Fosi V3 got decent audio reviews so what the heck. The garage system is a music system to accompany working on projects or the cars vs. just sitting and listening to music like I do with my home systems that cost much much more. So after connecting up an older generation Echo device to stream music, I used 14 gauge audio cable to connect the speakers to the amp. Very easy to do. The result is as you see it in the attached video. Loud enough for me and the overall sound quality is very good. So, this unit has few connectivity options but what it does, it does well. What I really like about this amp is its small size allowing me to store it in my garage wall cabinet. I would imagine this amp could be part of a home system in a small to mid size room Just be sure to match it up with a pair of good speakers. Speakers with a high efficiency rating will serve you best that is 90db or better. Recommended.
J**9
Excellent Beast of an Amplifier
Don't believe the 300 watt claims of the manufacturer. (I don't know why they just don't rate the amp with RMS real world specs). Still the Fosi Audio V3 is an excellent amplifier when paired with the optional 48V power supply, although it increases the cost. With the supplied stock power supply, the amp can deliver about 30 watts of real power and with the 48V power supply it can deliver about 80 watts of unadulterated bliss. The sound is clean with absolutely no hiss. You can tailor the sound by easily replacing the socketed OpAmps inside the amp, just make sure you insert them with the proper polarity. OpAmps can range from several to over a hundred dollars for a set. Better OpAMps can give you better depth and a wider sound stage as well as a mellower sound. Remember this is a no frills amplifier with only pair of inputs, it is basically a volume knob and nothing else. But this is perfect when used as a desktop amplifier to drive a pair of desktop speakers. In this mode of operation, you do not need the optional power supply since most desktop speakers are quite efficient and do not need much power. The 48V provides a more heft to the sound with the added power. It can easily deliver enough power to drive most speakers. With either power supply, the amp seems capable of driving even 4-ohm loads without distortion which most modern amps fail to do. Some Pros: * Cheap but great value * Compact size * Very efficient * Swappable OpAmps * High quality components: Elna capacitors, WIMA Output capacitors, Sumida inductors and NCC Capacitors Some cons: * Fosi used to supply the amp with the copper volume knob as well as the black one but it is now an added option. * The amp goes to sleep rather quickly after the input signal is cut. It takes about six seconds for it to come alive when signal is restored. * There is only one pair of RCA inputs * No Bluetooth capability * No subwoofer output
D**R
Fosi Audio V3: A Budget Amplifier paired with really nice speakers?
I had been hearing about the release of this amp from various forums and decided to experiment with it with a couple of speakers that I have acquired I’ve the last 6 years I or so. I’m a bargain hunter at heart. On one end, I have a pair of Klipsch LaScala’s from the early 1980’s that I resurrected from the dead. They were in horrible shape and came from a church that used them as their auditorium PA. They are know for their efficiency and usually have synergies with tube amps. On the other end, I have the electrostatic Martin Logan ESL’s, which sound completely different, are very detailed and have a reputation of being challenging to drive, although the newer Martin Logan’s don’t have this problem as much. I have been using a 90 watt per channel tube integrated amp and was really looking for an amp that was much cleaner and imparted less distortion, which a tube amp for the most part is built to do. The tube amp sounds great but it seems to blur the sound a bit, if that makes sense. With the LaScala’s, the V3 power was way more needed to drive them. It didn’t sound harsh or brittle and in fact, was completely quiet with the volume knob maxed. My tube amp imparts a slight hiss at the tweeter that is audible from my sitting position. The V3, checked all the boxes and did everything well. The highs and mids were nice and balanced and the biggest difference was with the low end. I have 2 SVS SB1000 subs and the V3 really provided nice and controlled texture to the bass region, something that was lacking in my tube amp. I won’t go as far as using the magical language to describe the sound that many audiophiles use but as this is a subjective review, what I can say is that the amp did its job and at this price, it really is a no-brainer for people that even are wanting to use this will quality speakers. Martin Logan ESL’s Challenge: These speakers are known to have dynamic impedance swings, with ohms that often dip, making them a tough act for many amplifiers. But the Fosi V3 didn’t strain at all. It provided consistent power, ensuring the ESL’s remained articulate and expressive. Much better than my tube integrated. The dips in ohms which could cause some amplifiers to falter, only showcased the stability of the V3. Very surprising for the low cost. Again, what can I say…these small inexpensive amps have improved to the point where they are an incredible value. Conclusion: The Fosi Audio V3 isn’t just a budget amplifier. It’s an amplifier that can be used with expensive speakers. For anyone hesitant to use the Fosi in similar use cases, give it a try. For the price, there’s very little to lose.
R**K
Ho acquistato il Fosi Audio V3 con molta curiosità dopo aver provato diversi amplificatori di classe D (tra cui Aijima) sono rimasto colpito sin dal dal primo ascolto. Sono un appassionato hifi da circa 35 anni, utilizzo anche amplificatori Mc Hintosh, ma ero davvero curioso di provare un oggetto così piccolo ed economico un grado di mettere in discussione le convinzioni dell'audiofilo più conservatore. Stiamo parlando infatti di un amplificatore senza fronzoli e colorazioni, con la sola manopola del volume, ma che assolve egregiamente al suo compito: SUONARE BENE! Naturalmente il tutto va inserito in un contesto adeguato che ritengo sia essere un ambiente di piccole o medie dimensioni oppure, come nel mio caso, un sistema audio da PC con monitor. Ho realizzato un impianto con il DAC Topping E50, Fosi Audio V3 e le ottime Cabasse Surf (piccole ma testarde con un efficenza di 85 Db su 8 Ohm) devo dire che sono più che soddisfatto del risultato ottenuto, testato con diversi generi musicali il suono risulta abbastanza lineare ma non privo di dettagli e dinamica; bassi rotondi e mai invadenti, alti molto dettagliati e puliti, le voci che spiccano per naturalezza. Insomma un piccolo gioiello che sicuramente vale molto più di quello che costa e che ti lascerà a bocca aperta ! Riguardo la potenza dichiarata di 300 W per canale va considerata con un alimentatore da 48V 10A per un impedenza di 4 Ohm, nella maggior parte dei casi invece, ovvero con l'alimentatore di serie da 32V 5A, tiriamo fuori una potenza di circa 50-65 W rms per canale su 8 Ohm, una potenza di tutto rispetto soprattutto perchè priva di distorsioni al massimo volume. La manopola del volume ha un controllo di tipo logaritmico, per cui bisogna girare parecchio prima di avere un buon volume di ascolto ma non abbiate paura di farlo; il grosso della potenza è nascosto nella parte finale. Sulla componentistica interna vi rimando ad altre recensioni più dettagliate, ma sicuramente l'ottimo TPA3255 (già presente su Aijima A07 e Fosi Audio BT20A) assieme ai celeberrimi Op amp NE5532 costituiscono ormai un abbinamento collaudato, ma il Fosi Audio V3 si differenza dai suoi rivali per l'utilizzo di una componentistica interna di alta qualità, in particolare condensatori ed induttori Giapponesi e Tedeschi. (potete trovare ulteriori dettagli sul sito ufficiale) e vi assicuro che la differenza con gli altri amplificatori si sente, e si sente davvero bene:) Degno di nota anche l'originale sistema di dissipazione del calore posto al di sotto del chip e collegato a tutto lo chassis; un sistema davvero molto efficiente che difficilmente manderà l'amplificatore in protezione. Molto interessante inoltre la possibilità di sostituire gli Op amp con un altro modello, sul sito Fosi Audio potete trovare alcuni consigli tra cui gli Sparkos SS3602, MUSES02, OPA2604AP, OPA2134PA ecc... (la lista è davvero lunga) facilmente sostituibili perchè gli NE5532 sono montati ad incastro su un adattatore DIP8. Personalmente, preso dall'entusiasmo del nuovo prodotto, sto testando il Fosi AUdio V3 con i nuovi Op amp ORACLE II-02, il risultato è davvero entusiasmante, ne scaturisce un suono non migliore di quello prodotto dagli NE5532, ma sicuramente diverso, più caldo, molto più simile agli amplificatori tradizionali o, se preferite, ad un valvolare. Insomma il Fosi Audio V3 rappresenta davvero un grande balzo in avanti per l'azienza sperando che continui su questa strada; un prodotto chenon ha paragoni nella sua fascia di prezzo e che per come suona vale almeno 5 volte di più. STRACONSIGLIATO !!!
M**E
super
Ó**�
Barato e eficaz muito bom
I**U
Ürün harika,ancak aras kargo çınarcık şubesi ürünü 5 gün şubede bekletti. Ürünü işleme bile almadılar. Bursa şubesinden çıkış yaptı çınarcık şübesi işlem yapma zahmetine bile girmiyor.Ürün teslimat şubesinde ama nerde olduğu belli değil.ürünü 5 gün sonra telefonla teyid edip ürünü kendim almak zorunda kaldım 60km yol yaptım.
J**D
I'm a music lover and this makes one of my favorite music devices. Delivers the best sound quality for me. Recommended.
Trustpilot
1 week ago
2 weeks ago