Laser Receiver for Green Laser Level, Two-Sided LCD Displays to Detect Green Beams Digital Laser Detector Used with Pulsing Line Lasers Up to 197ft Working Range, Rod Clamp Included - FD30

Using the Cigman laser level i got from Amazon (should work with any "Green" "Pulsed Laser" (not continuous wave 'mode'), I was getting accurate 'level' tones at 65 feet in direct sunlight. Likely could see sensor at 75+ feet, but only needed 60 and less for setting concrete forms to be 'on-grade' for our 60'x44' garage footings. Being over-cautious on the laser's self leveling capabilities, I ran a water-Level (can't beat simple physics) and found the laser was accurate to less than 1/16th of an inch at 71.5 feet! This means this laser receiver was equally accurate. One minor quirk that seems to run in most laser level receivers: at greater distances past 30 feet, the laser line spreads and weakens the farther you get from the laser source. In direct sunlight the on-target green led may not light up or tone. You'll see this receiver go from low to high rapidly with very minor movements signaling you're on target. Since it delivered me a less than 1/16th inch accuracy at 71.5 ft, this isn't a problem for simpler applications such as mine.

Had this product for a while, it came on time, well packaged, works really good, haven't had any problems, has worked well every time I use it, I would recommend this product

This receiver was an impulse purchase to help me lay out foundation footings for my sunroom addition. I bought a laser but it didn’t come with a receiver which I found out after purchasing. What can I say. It works great! Buy it. It’s reliable and rugged. Comes with its own carry case too. Very nice.

Worked for one day. Next day only beeped when turned on and no response to the pulsed laser light. Contacted customer support twice with no replies

used for establishing the grade of yard to help with water runoff works with companion transmitter perfect for DIY and works as well as more expensive units

Does not work on pulse mode on my Honminda 16 line laser level like is advertised...only works on the non pulse solid line ,but only on the lighter line brightness..not the full brightness setting,i guess it has to be a certain frequency But's usable for my intentions..i tried it outside about 30 feet away and works fine for that distance so far

I have 3 laser levels, and I thought for sure this would work with at least one of them, but apparently not. No matter what mode I put any of them in, this showed me nothing. However, after spending about an hour doing more research, I finally figured out that none of my laser levels work with this. Sigh. It's clearly my fault, as I obviously made a mistake. So I can't fault the product. The one bit of advice that I can give you is make sure your laser does "pulse mode", which it seems none of mine do. This seems to be a decent little device, but make sure it'll work with your unit prior to purchase.

Amazing product to use with fire core laser level. Just set the grade for my patio project out back.

Fonctionne très bien avec mon Niveau Laser G60.

Parfait

Great little unit for the price.

i was hoping to use the unit with my DeWalt Red laser level... but it simply does not work. refer to the attached video

Pour une fraction du prix d’un produit professionnel, ce détecteur remplit son travail pour un bricoleur comme moi. Super achat