Womier Low Profile Keycaps - Shine Through Keycaps 60 65 75 100 Percent

I've gone down this rabbit hole recently of trying to find the perfect keyboard. I ended up really liking the Royal Kludge RK84 with mechanical blue switches (I am a heavy typist, programmer/IT pro) except for one thing... the keycaps were WAY WAY too tall. Instead of sending it back, I decided I would keep the keyboard and get a set of low profile keycaps. Enter these... They came really nicely packaged in a two-layer tray that was laid out like a keyboard would be. There were keys for anything I could imagine needing (different sized Alt/CTRL/Function keys for different keyboard layouts, etc.). The finish is matte with just a little bit of texture. Overall feel is 4/5 (I prefer the soft-touch feel of my keychrons a little better). I had no problems whatsoever installing these and the fit was perfect. My keyboard has north-facing LEDs so shine-through is adequate, although some of the larger legends (Caps/shift) aren't completely uniform. Not enough of an issue to bother me. Again, 4/5. There is no legend for media keys or any of the specific shortcut functions for my keyboard (of course). While I think this makes for a really nice, clean look, you're going to have to refer to your keyboard manual for anything other than standard use. I don't tend to use media keys, and I've memorized the important shortcut functions (like connecting my keyboard to a different device) so it isn't a big deal to me. YMMV. I'm a big fan of the profile and the typing experience is superb. Even though they sit a little higher on the key switches, you can see the huge difference in height in the pictures I provided. They have a nice wide crown with narrow shoulders that make it easy to get an accurate keypress without accidental activations. I did some objective measurements using the stock keycaps, these, and my Keychron K5 and K3 keyboards (both low-profile). These consistently produce the highest WPM and accuracy scores for me. Again, YMMV. Keyboards are extremely personal, but if you are looking for a low-profile keycap, I would absolutely recommend giving these a try. I only wish they came in more colors so I could customize a little bit (even if it did cost me an extra $20).

The keycaps feel great to type on, the tactile feel is smooth and pleasing. The sound is a pleasing echo that tends towards bass. The lower profile makes typing much more pleasing if you're into the lower profile. The colors are nice quality, I wish there were a bit more variations but you can't knock it for that. Using them on a Keychron Q3 HE. The south facing LEDs on that keyboard aren't great. There is still light bleed between the keycaps just because of the nature of south facing LEDs but the legends do light up but you really have to push up the brightness on the backlight to get the edge keycaps to shine through. In other words, its good enough for south facing LEDs.

These are TERRIFIC keycaps that I can easily recommend. I used them to replace the original Keychron LSA keys that came with my K3 Max low profile keyboard; as well as a set of Nuphy NSA shine-through keycaps. The Womier keys are quality double shot PBT with very sharp lettering and excellent shine through By contrast, the Nuphy keys are dye sublimated PBT; the key symbols are fuzzy and the shine through is washed out. I especially like the tables on the Womier keys. They have deep spherical tops, similar to SA keys, that snuggle my finger tips for better comfort and typing accuracy. By contrast the Nuphy NSA have very large shallow tops that easily catch finger nails causing miskeys. The Keychron beat the Nuphy for comfort but doesn't match the Womier for accuracy. That said, I wish Womier included common media symbols on their Function Keys. I switch between working on Mac and Windows machines and having media symbols clearly inscribed on the Function keys makes my life much more convenient. I ended up leaving the Nuphy Function keys on my keyboard specifically because Womier lacks media symbols. Lastly, the stems on the Womier keys fit loose on the Keychron stabs. I found that squeezing the stems with a pair of needle nose pliers tightens them up nicely. But for the above two nits, I would quickly give these keycaps 5 stars.

I have a Keychron K3 Pro keyboard that I thoroughly enjoy. It is a low profile compact keyboard with no number pad. It's very slim compared to the original Keychron K2 mechanical keyboard I purchased several years ago that is still today going strong. I wanted a more of "black" look to my keyboard for black is sleek and modern making your desktop look cutting edge. I did my research and found the WOMIER Low Profile Keycap Shine Through Keycaps for Cherry Gateron MX Switches. They are doubleshot PBT design, oil resistant, and durable. These keycaps are 4.5mm in height compared to the 11mm full height keycaps. The finish I would prefer to be a "smooth" matte black. The finish on these keycaps is good, but could be better. They don't need to be shiny. Let's see how they work out in the long run. What is essential for good long term wear is to keep the keycaps clean of any oils and debris collected after use. I clean my keyboard several times a week with a simple damp rag. Twice a month, I use a rag dipped in Dawn dishwasher soap, and clean the caps followed by a damp rag. This usually gets the job done for long term wear. The one thing I noticed is that the caps lock keycap was designed with just the "plus" insert which is normal, but for my keyboard, it had "three" catches as noted in the attached picture. This is not a deal killer and I understand the vendor designed these keycaps to be generic for all types of low profile keyboards. However, they could have made one of the "caps lock" keycap with THREE catches. Again, not a deal killer, but if this one particular keycap gives me problems, I still have the original keycap as a spare. The included orange keycap removing tool was not of much use. It was too short compared to other keycap pullers that were longer and easier to use. In summary, this is a decent product that gets the job done with a couple of nuances that is no big deal, but warranted mentioning in this review. This is a value based product. I recommend them.

Overall decent keycaps. Bought these for my Keychron K5 Pro and had issues with the spacebar and shift key fitting properly. Shift key was usable but the spacebar was so wobbly it was tough to use and ended up switching back to the standard keycaps that came with the keyboard.

THIS REVIEW IS IN REGARDS TO PAIRING THIS KEYCAP SET WITH THE KEYCHRON K5 ULTRA 8K! (See end of review for a note on making the oversized buttons fit properly.) To start with, these keys are very slightly higher than the stock keycaps. That didn't bother me, but these are "low profile" not the stock "LSA low profile." They will feel slightly different, but in my opinion, not in a bad way at all. The keycaps themselves have a nice texture, and of course, they have a decent degree of shine through. They do give kind of a "hazy" shine-through look in my opinion but these are the only after-market keycaps I found compatible with the Keychron K5 Ultra with the exact same stem shape, so they'll have to do. All of the regularly sized keys fit perfectly out of the box, no problems there. For any oversized key (Namely: Spacebar, both Shift keys, Enter, Backspace, and on the numpad: +, Enter, and 0) you will need to very slightly modify the stems that grip the stabilizers (LEAVE THE MIDDLE STEM THAT GRIPS THE SWITCH ALONE). This is easy enough with a pair of needle nose pliers, as someone in another review mentioned. BE CAREFUL NOT TO SQUEEZE TOO TIGHTLY! If you do, the key won't fit on at all. I accidentally did this with one key, but was able to widen the affected stem again by sticking the end of my keycap puller wire in and slowly working it side-to-side. I would do this methodically, slowly pinching the stabilizer stabs in, then testing on your keyboard. You should feel them grip the stabilizers as you push it down. If that doesn't happen, try tightening the stem again step-by-step until it's sized correctly. If you do this right, the key will press down as smoothly as the stock keycap instead of feeling clicky.

I was looking to replace the stock keycaps included with Logitech's mechanical low profile keyboard, the MX / MX Mini. It all started with desperately wanting to get rid of the painfully boring monotone dark gray ABS plastic originally used. Personally, contrasting colors between the modifier and the alpha-character keys is something I favor a lot, and this new set by Wormier fitted the bill to perfection. The much brighter color scheme made for a way more interesting-looking keyboard (don't be fooled by the photos attached -- it looks way nicer in person vs. how poorly it photographs). Additionally, the way it feels when typing also improved significantly as a result of the PBT material used with the new set. Note that the keycaps for the spacebar and the F1-F12 keys were left with their originals parts for obvious reasons, which for me wasn't a bad thing at all: (1) it adds a final touch for a more interesting look; (2) this preserves the icon legends Logitech uses for specific firmware-based tasks; and (3) the backlighting effect also benefited from the increased color contrast between colored key sections. Gains reported "at every department" ---and all for only sixteen bucks!

Really happy with these. They do come with Command and Option keys — one of my main reasons for buying — though worth noting there are two sizes included and the smaller ones didn’t fit my keyboard, so had to use different keycaps for command and option on the right side of the spacebar. The height reduction is real but more nuanced than expected: the caps themselves are noticeably lower than standard Cherry profile, but on standard height switches there’s a larger gap at the bottom of the cap. So while you get roughly half the keycap height, only about half of that translates to actual typing height reduction. I expected this, but make sure you to manage expectations on how ‘low profile’ the result feels on standard switches. Still a great set for the price — good PBT quality and they look clean

When I got my Keychron V5, I immediately switched out the keys as I did not enjoy the stock one. I thought I was happy with Cherry profile but when in a rush I kept making typos. I then started looking into low profile keyboards but decided to take a chance on low profile keycaps to start in case I didn't like it. Since I switched to these I've been making considerably less typos and mistypes. My jittery coffee fueled fingers have no longer trip on the keys. They sound really nice paired with Keychron's silent brown pro switches. I chose this set as they are nice shine through PBT's. They feel really good and are as pleasant to the ear as they are to the eye. My only gripe is that the shine through is barely noticeable on the black keys. They show up in pictures but in person the legends are barely legible. I love the set and am going to keep it, but am looking for a similar set with black keys with solid white legends. I reached out to the seller, who responded quickly, that they do not sell individual keys as they are manufactured as a set. I'll wait for their other variations to go on sale to swap these black keys.

As a gamer had no issue with normal keycaps in mechanical keyboard. However, for work needed something more comfortable. These keycaps has this plus more. Using old program for work I needed some keycaps that are not on 75 to 80% keyboard layouts. This had all keys I needed and as long as you are able to customise keyboard layout you can do anything with these 118 keycaps. They have very slight lights coming out through them making it perfect for night use. Not too bright but can still see them in dark room. I was able to fit all keys for my need even if some of them did not have exact size to match RK H81 keyboard.

These keycaps are of high quality that provide great feedback and nice “thuds”. They look really good on my board with subtle shine through as well. Highly recommend!

No sabía si a mí teclado le iba a quedar, pero valió totalmente la pena, quedan perfecto y no tuve que comprar otro teclado para tener las teclas así.

Die Keycaps treffen genau meinen Geschmack. Die Keycaps sehen super aus, fühlen sich überraschend hochwertig an und klingen auch besser als meine alten xda keycaps, die ich vorher benutzt habe. Wenn man Wert auf Tastaturbeleuchtung legt, sollte man daruaf achten, dass die LEDs northfacing sind, sonst ist der shine through nur sehr schwach.