SUNLU 3D Printer Enclosure, Constant 3D Printing Temperature for ABS 3D Printer Filament, CR10 3D Printer Cover, Provide Plenty of Room, Fireproof, Easy to Install, Size 700 * 750 * 900mm

Bought this to block off odors and maintain the temperatures of my Saturn 4 ultra Resin Printer.The Enclosure fits the Saturn 4 Ultra perfectly, even when the lid is fully opened.The Temperatures so far range from 38* to 42* consistently through a print.It does keep the odors in the enclosure...until you open it and the concentrated smell blasts you in the face. Wear a Mask and Goggles.Overall I am very pleases with this.9/10

Easy to assemble, now able to print ABS without fear of prints failing

A little difficult to assemble as the outer cover was VERY tight to fit over the frame. I went for the bigger enclosure too as I have an Artillery X2 Sidewinder and the spool sits on top of the gantry so I needed the extra height. But once I got it put together, which was simple to do, it is fine. I bought it because of adhesion problems, stringing and spaghetti prints from the prints not sticking to the bed for the entire thing. But with the enclosure the drafts and cold spots do seem reduced. I've only used it a few times so far so I'm still reserving judgement on whether this was worth the money. So far all good!

Was easy to assemble, although needed quite a bit of force to get the poles in place. Has really helped reduce warping for all materials I use, plus it does slightly dampen the noise which isn't what I bought it for but a nice bonus.

I'd been after an enclosure for my heavily modded CR-10s for a while, I saw this at a good price and perfect size from a brand I knew and decided to take the plunge. I'm so glad I did, this enclosure is awesome, I assumed, wrongly, that it was just a case of building the frame around the printer and slipping the outer casing over the top, what I didn't realise was the outer case has a bottom to it meaning that when you zip it up it's completely enclosed. a big flap in the left side with Velcro to secure it is very useful for feeding wires through and a small hole at the back for power lead too. When I got my printer in it, it makes my printer look small, it's not. Highly recommend this if your looking for a large enclosure for you 3D printer. One thing to note is it can be a little awkward to get the casing on as it's a very tight fit, which is a good thing but still slipping it over the frame is not super easy especially if you have limited space like me, but it is worth the effort.

I have an Ender 3 Max.The size of this is perfect and the heat retention is great.I usually put the heated base plate of the printer on 80 degrees for about 15-20 mins first, to warm the enclosure.It's seriously cold in my conservatory, where this sits, and I now don't get any major warping problems on large flat surfaces.There are side flaps but nothing conducive to fitting an extraction hose, not that I have one.It's an absolutely fantastic deal. I'd buy another in a heart beat and recommend this one to friends.

Well packed and easy to install. Firm fittings and tight fit no slack and strong zip stitching. Cover ender 3 with top spool and space at side fir extra spool for dry storage. Slight noise reduction and clear view screen. Recommended and will be ordering more.

Keeps the heat in and at the same time drys out 3 reels of pla if placed correctly

I purchased an SUNLU filament dryer earlier this year and I was impressed with the product quality so I decided to purchase their 3D print enclosure based on that experience.I needed an insulated enclosure to properly print PETG with my Solvol SV06 printer. I am not disappointed. The product quality is excellent. The fiberglass rods are smooth and well finished. The parts fit snugly (which you need) and assembly was easy. You do need to "flex" the last few rods to get the frame in place inside the cover, but if you have ever used fiberglass rods with a tent, the method is similar. The zipper action is smooth, without binds or snags. Although I have only done a few prints I am very pleased with the product so far.

Fácil de montar. Insuperable relación calidad - precio. Cumple su función .

Gekauft für meinen Ender 3 Pro mit einigen Mods. Aufbau ging quasi ohne Probleme (man muss echt aufpassen, die Stäbe nicht zu vertauschen, sonst wird es kein Kubus), nur der Überzug hat einen guten Kampf geliefert bis alles sauber gesessen hat. Drucker passt problemlos rein, Loch für Kabelführung ist hinten rechts unten und nimmt auch mehr als nur das Kaltgerätekabel auf.Innen ist die Folie etwas knitterig, rein optischer Makel. Sichtfenster ist klar und gut zu durchblicken. Was mich stört ist der Reißverschluss, es sind 2 Zipper. Beide haben "in den Kurven" gerne mal Probleme und müssen vorsichtig geführt werden sonst verkannten sie. Wenn man das weiß, kein Problem, würde aber besser gehen.Vom Drucker produzierte Wärme wird gehalten, habe noch kein Thermometer eingebaut aber meine ASA Prints sagen, alles gut. Auch die Qualität meiner PLA Prints ist ein Tick besser geworden. Lautstärke dämpfen tut der Kubus aber meiner Meinung nach nicht wirklich, vielleicht sehr geringfügig, aber das ist denke ich ein subjektiver Eindruck.

Facile da montare e funzionale, fa il suo dovere.

Rien a dire, montage facile, semble être de bonne qualité, bref j'y ai placé une Prusa MK3s pour de l'impression ASA et ce caisson fait parfaitement le job. Je recommande.