ThermalrightHeilos Solid Thermal Interface Sheet, Solid Thermal Conductive Silicone Grease Sheet for CPU/GPU, Conductivity 8.5W/mk, Desktop/Laptops General Purpose,for Intel (30×40×0.2mm)

I bought two of the Intel versions. I applied it to my 13900K, and an EVGA 3090. Both of them had issues with sticking to the plastic, but I just slowed down and remained patient. Even with small tears in the material, you have to remember that once it heats up it'll liquify and join together once again. Both my processor and GPU are covered for a while as this won't suffer pump out. The temps are good immediately after installing, but they will get better with time which is even better. Remember patience is key with this product. I bought two, and used two.

The thermal paste wouldn't separate cleanly from the paper it comes on, so it couldn't be used.

Applying it is easy if you bother to take 2 seconds to read the instructions, however the performance is quite bad.It performs worse than the pre-applied paste that came on my AIO.I don't know if it's just terrible quality paste or if it's because it's a super thin layer. Either way, I think it's garbage.

Completely unusable product. I got two of these and neither one would peel off the clear sheet. It comes off the white sheet fine, but it tears or breaks when trying to get it off the clear sheet. Even if you can get it off, there will be thin spots and some spots where it's thicker because of the breaks and where it pulled. There's no way to get this to actually lay flat. Luckily it's cheap. I ended up throwing them both away after fighting with it for over half an hour.

The other reviewer is right on the money when they say that it is frustrating. I bought three in case I messed up, and 2 of the strips were crinkled - they are in a hard packaging box, but it was mailed in bubble wrap packaging. I would say it may be crinkled from the factory since it was the only thing "damaged" - the boxes were in perfect shape. I applied one, and of course it tore at the wrinkle in it, so I used the second sheet with a wrinkle in it to patch the 1st, creating my own Frankenstein of a thermal sheet. At least all of the bare metal on the processor is covered, and the pressure from the heatsink will level any high spots. Just be mindful of how Amazon sends your sheets - if in a bubble mailer, it may end up having a wrinkle in the sheet - if in a box and wrinkled, then its due to the factory.