8PCS Segmented Motorcycle LED Lights Kit with Brake Lights Turn Signal, Motorcycle LED Underglow kit with APP/RF Remote,RGB Neon Strips Multicolor 12v Waterproof for Harley Honda Kawasaki

Started great. Turn signals wouldn't work, but the brake light function was good, so left it at that. Then battery dying. Realize you HAVE to use kill switch when done or it will drain after a few days. Now.... lights will come on, but within a few seconds, have dimmed down to nothing. Can't change color. Kill switch off and back on... same thing. full bright and dim to zero within 10 seconds. I cannot find a contact for this company. will buy another set, but not from here. Do better. UPDATE SEPT 15: Seller sent an updated unit with a wired cutoff switch. I didn't wire that in, and am just using the toggle style cut off (for no parasitic drain) but 2 rides in extreme heat and still working like a champ after 3 weeks. Hopefully no further updates, but happy with seller for response and have amended to 5 stars.

Installed on 2014 harley ultra limited. Super easy install. Awesome kit, been on the bike about 2 weeks. Super bright and easy to use app for your smart phone with pre loaded colors. Also has option for custom colors. Comes with tape on the lights and so far I’ve put about 1000 miles on the bike and everything is holding in place nicely. I also used zip ties provided where possible without being seen.

These lights are amazing. We installed them with very little issues. We did not use the sticky that comes with them, in our experience, it's not very good. We removed the sticky and used extra strong clear gorilla tape. These installed easily, they all worked and the on/off switch is great. We installed them with the brake light wire so they also all turn red when I hit the brakes--I didn't get a picture of this, but it looks amazing. In these pictures the lights are on blue. We did not install the left/right blinker wires. I also was not able to get the app to work, however that was not a big deal to me, there are 2 remotes and that's fine. Overall, 5 stars from me!

The lights themselves work very well; they are bright, and the color choices are nice. However, when I hook up all the turn signal and brake light wiring, they started to malfunction. I noticed that when the lights and bike were both switched off, my tail light was gently illuminated, and the LEDs also were dimly lit. That's going to drain battery, and is unacceptable. Worse still, they occasionally would power up incorrectly and the system would just fade to black over about 2 mins. I was going to leave a 1 star and return them, but I solved the problem. PSA: you can fix the turn signal and brake lighting by simply splicing in a diode in the connection, with current flow AWAY from the control box on all three signal wires. If it doesn't work right, flip the diode around and try it again. Now that I've done that, the lights work flawlessly. My only complaint now is that the turn signal lights are wimpy, they kinda flicker instead of blinking brightly, even though they do exactly that when hazard is depressed.

Easy to install. If you have a motorcycle with a lot of plastic this will work well. I put mine on a heritage softail with hard bags and under the tank. And it glows awesome. Multicolor choice via the app. Hooked to the battery terminal so no battery issues. Adheres well to cleaned areas.

had installed 4 other light kits on as many motorcycles and they all worked great. Different maker of light kits before this kit sucks and would never recommend it to anyone. I get the lights to work, can change colors, turn off and on brake light works but the it just quits working. I have checked all the wires and reconnected the ground and positive wires. It works again then quits after a few minutes. I'm not an idiot and now how to wire a complete car. It acts like a bad inline fuse or a bad ground wire, I have checked the ground wire and positive and it's all good. Then 1 day after the install the unit FRIED. Also the check engine light went on and stayed on. Please don't wast your money. I have to buy another sew set. Thats $75.00 wasted.

The media could not be loaded. I looked at several light kits before landing on this one. This thing is exactly what I wanted. Easy to install, lots of functions and plenty of operating options from a switch to two different remotes, or a phone app. One important thing to note is the kit is advertised as waterproof however in the instructions, it says the control module for the kit is not waterproof. I sealed up the control module in a plastic bag so absolutely no big deal. I also taped the plastic connectors on the led strips just to make sure. It comes with different extension harnesses, so I had no issue putting them where I wanted on my 2010 Softail.

The media could not be loaded. I really like the way this kit came out. It gives my bike it's own look. I really like that the bike can be controlled multiple ways. The install took about 5 hours or so, as I took alot of the bike apart to hide the wires.The turn signal feature and break light feature really rock. Now instead of a little brake light in the back, the whole bike turns red. When I turn on the turn signal, that whole side of the bike flashes. Take your time and do it right. Plan it out first, and then go buy a ton of zip ties. They only supply a few in the box and I wouldn't trust 3M tape on its own, for long term. I wired it thru a power distribution box so that everything is off, when the key is off. For the price, you can't beat this kit.