Matx Case:High Airflow Micro ATX Case, Support MATX, Mini-ITX, Micro ATX Case Slim with USB3.0x1 I/O Port, Black with 80MM Fans

Pretty roomy with some tight cable management. Fitting the GPU requires some finagling, worked with the Asrock Phantom Gaming RX580, but I also fitted a Dell OEM RX5700XT just fine. Even had two 120mm fans mounted to the front and worked with both GPUs in place. Love the small form factor, and it feels sturdy enough. Main gripe would be that the PCIE screw holes on the back of the case don’t line up well and require some force. I would recommend a drill to work the screws in until they grip. Get some zip ties, and some generic round rubber feet as the case doesn’t come with them. Also, if you’re going for gaming rig, plan getting a mother board that has connectors towards the bottom for easier cable management. The MSI A520M and Asrock B450 worked fine in these.

I thought the case looked neat and for $35, I decided to give it a go. As others have said, if you keep the limitations of this case in mind, it's an extremely good value.I have the following components in the case:Gigabyte B450m ds3h v2 mATX motherboard paired with a 4600G CPU using a Thermalright Assassin X 90 SE V2 CPU Air Cooler.ATX non-modular PSU2 120mm case fans on the front.2.5" ssd mounted on the side/bottom.As you can see, this is not a build optimized for a small case, and while it isn't pretty, it is functional. I have no doubt that with an itx motherboard and modular PSU, it would be clean build with plenty of room.Temperatures were around 50 C when playing Dark Souls Remastered (1600x900, 60 fps using the 4600G iGPU). I have the case placed horizontally.Case feels solid; has good build quality. If placed vertically, case feet are pretty nonexistent, so be aware of that.This is an excellent case for what they're charging.**5/8/2024 Update**I decided to put a GPU into the system. Grabbed a SHOWKINGS Radeon RX 580 8GB, which is about 230mm long. This required me to remove the front fan, memory, and CPU cooler in order to install. It's a pretty tight fit, but as you can see it is doable. Once installed, I was able to reinstall a 120mm fan in front of it. As you can see in the pic, there isn't a ton of clearance between the card and the bottom, but as I have the system on its' side, air flow hasn't been an issue. Temps didn't exceed 69 degrees C when the GPU was at 100% utilization.So, this tiny little $35 case can fit a non-modular PSU, 2 front 120mm fans, a 2.5 SSD with SATA and power cables, and a medium sized GPU. It was a bit challenging to install everything, but I'm not some PC building savant or anything.I intend on installing an ITX MB, NVME SSD, and modular PSU in the near future which I anticipate will greatly improve the airflow and neatness of the system.

For 30 bucks, you really can’t beat this little case. I got it in white. Came the next day and was even small enough to fit in an Amazon locker. There’s enough room for an m atx mobo, or itx mobo. (M atx makes it alot easier to find parts for a good price but beware you will have less space than if you were to use an itx)Also enough room for a discrete gpu, but clearance is limited, and you will probably have to use a smaller gpu (such as 5700 xt itx or another single fan card like the 2060 or rx 550) I tried to put a sapphire nitro rx 580 inside the case and there was not enough space. Vertical gpu riser would def help with this and give you more options.You can mount 2x 120mm fans on the front panel which is fantastic for airflow, and it comers with a pre installed 90mm exhaust fan (little bit of a bonus) but if you’d like to replace the exhaust fan, there is only enough space for a 90mm alternative fan. Front panel connectors for usb, power button and reset sw are also included.My one complaint it the front usb ports. Only 2.0, no 3.0, and while the price is cheap enough, it’s 2024, and nobody needs 2.0 on the front of a pc case anymore. Which is why I’m deducting one star.Still well worth the buy in my opinion. This is perfect for a light gaming rig or an office/work pc.

I recently purchased the MATX/ITX High Airflow PC Case, and I must say, I'm thoroughly impressed. This case strikes the perfect balance between compactness and functionality. Despite its smaller size, it accommodates both MATX and Mini-ITX motherboards seamlessly, making it versatile for various build preferences.One of the standout features for me is its exceptional airflow design. The case comes with strategically placed vents and fans, ensuring optimal cooling for my components even during intense gaming sessions or CPU-intensive tasks. I've noticed a significant difference in temperature compared to my previous case, which speaks volumes about its cooling capabilities.Build quality is another aspect where this case shines. Despite its affordable price point, it doesn't compromise on sturdiness or durability. The materials used feel premium, and the construction is solid, providing ample protection for my components.Moreover, the layout of the case is well-thought-out, making cable management a breeze. There's plenty of room to route cables neatly, which not only improves airflow but also adds to the overall aesthetics of the build.In conclusion, this MATX/ITX case exceeded my expectations in every aspect. Whether you're a casual user or a hardcore gamer, this case is sure to meet your needs. I highly recommend it to anyone in the market for a compact yet high-performance PC case.