Devoko 10x10 FT Outdoor Storage Shed, Brown

The shed arrived in perfect condition and was packaged very well. The size was exactly as shown in the pictures, which was a plus. Assembly took quite a long time, but the instructions were clear and easy to follow, and we didn’t have any major issues putting it together. The quality and sturdiness are fair for the price. Overall, we’re happy with the purchase and would recommend it to others looking for a reasonably priced shed.

Im leaving 4 stars because of the poorly written instructions. Actually, not written at all but mostly just illustrations of the pieces. You have to use common sense and imagination to get it together. The base and walls were a breeze, but the roof and especially the door were the most challenging. My husband is 80 and I am 70 and we got it fully set up and in place in less than 4 hours with a few breaks in there. We were able to carry it around to the back yard without much trouble. It is not very heavy or cumbersome. We are going to anchor it to the ground with appropriate fixtures as we get high wind storms here in Georgia. The overall quality is good and it seems sturdy enough for our needs. I would recommend buying some well fitted gloves as I cut myself pretty bad a few times. The gloves provided in the kit are useless as you have to work with very short 1/2" screws lining them up with 3-4 layers of sharp edged metal.

Just finished assembling 8x10 unit. Unlike other units this unit is actually slightly bigger than 8 x10. We made a base 9 x 11 which worked out well. You definitely need a base. The base pictured used 2x6 PT for outer frame and 2x4 PT on 2 ft centers for cross member supports. Used 4x8x 7/16 OSB for the floor. Did a water seal on the OSB before assembling the shed since it isn’t PT. You definitely need a base if you aren’t assembling on concrete in order for all the holes to line up. Make sure the bottom frame of the shed is squared by measuring from diagonal corners to make sure equal distance. Secure the bottom shed frame to the base to keep it squared during assembly. The instructions were good and generally went together without significant issues. You’ll need to be careful attaching the top frame. The top frame on each side has a groove instead of individual holes so you’ll need to careful with the corners in order for roof panels to line up correctly. You may need to make adjustments in process. We managed to assemble the entire shed with only drilling two holes when attaching the final trim piece as the holes were off father than could be adjusted. Half the panels have a protective coating. After removing the film from one panel we chose to leave the rest covered as it took about 20 minutes to peel the film off the first panel. We’ll deal with the film a little at a time in the future. You can use an electric screw driver but it needs to have a torque adjustment. Some of the screws can strip if you aren’t careful but there about 450-500 screws which is more than we wanted to do by hand. We chose to apply dab of acrylic seal on each to the exposed roof panel screws as the included plastic washers didn’t cover some of the holes entirely due to alignment. It rained the day after we finished and the inside remained dry without leaks so the deal was a good choice. You definitely need two people for assembly of some of work. I recommend having a folding table to layout all the hardware to keep from having to continuously bend over to grab screws. Also recommend removing everything from the two boxes and laying them out to keep from having to continuously dig through the boxes to find the piece or pieces you are looking for. Actual assembly time with two people was about 13 hours over three days. Leveling the ground and assembling the base was about 4 hours. We had all the base lumber cut to size at Home Depot so we could start assembling as soon as we got home. You may question the the rigidity of the unit as you are assembling but once everything is completed the unit is pretty solid, more than I anticipated. Overall we are satisfied and felt the unit went together pretty easily.

Alright so got a bit of ground to cover here. I’ll preface this by saying that if you’re assembling this and you don’t have much experience with assembly, the instructions are a nightmare. I consider myself pretty handy with tools. Overall, between building the platform and assembling the shed, I’d say give yourself about 10-12 hours to get this all done if you’re solo. After getting everything assembled just a couple days ago, I now have water dripping into my shed. All plastic washers were used that were needed, but the issue was that some holes were not lining up properly. I will be going over what I can reach with silicone to try and seal up any orifices, but this is already a red flag for me. There is plenty of storage capacity, which is a huge plus, but the materials are so thin and inexpensive that you cannot count on hanging anything off of it. If you do, use command strips and only hang very light things. Alternatively, make/purchase free-standing shelves. I originally bought this back in October of last year. I started assembly as soon as it arrived, but discovered it was missing crucial parts to finish the framing. Those took a couple weeks to receive, and by the time I could dedicate more time to the project, it began to snow/freeze. Putting together metal anything outside in freezing temperatures wasn’t my idea of a good time. Lastly, the doors don’t close properly. I’ve tried messing with the hinges, even tried bending framing in a way to account for the mis-alignment, but simply put, it’s just a hair too snug and about a 1/4 inch off, which is enough to allow me to shut the door without lifting the left side. There’s likely a better quality shed out there to purchase folks, but if you’re not worried about stuff taking on light rain, this will do the trick, I just don’t expect the platform to last long due to the fact that I can’t climb on the roof to seal all the seams and stop the water intrusion.

This storage unit is a smaller model, not the standard 10 by 12 size. The storage is pretty stable once it’s assembled, and it feels decent for the price. At first I actually thought it wouldn’t be stable at all, but, um, the instructions are very limited. They don’t explain things very well. It leaked after a few rains, so I can’t really recommend that. They also use very cheap screws, and I think they should really use better quality screws and improve the instructions. So overall, three stars.

Pretty easy to put together, at least that's what my daughters said. It took them a couple hours. They did say some of the pieces could be marked better (left/right, front/back) as they had to switch some items around. It is thin metal, but good metal for the price. The colors are good shades of brown as well. It's held up to several good rains (light storms)

Very easy to put together. There are a lot of screws. It took two people about 8 hours to completely assemble. Very pleased.

We purchased this shed expecting a fairly straightforward assembly, but it ended up taking us about 4 days to put together. Part of that was because we had to stop multiple times to make additional trips to the store for supplies that we didn’t expect to need. A major issue was that many of the panels and holes did not line up properly. The screws provided were not always effective, so we ended up spending about $50 on self-tapping screws just to get everything secured. We also had to purchase silicone to seal the numerous gaps and openings because we did not feel comfortable leaving them exposed to the weather. The instructions were okay overall, but some of the pictures could definitely be more detailed. There were several points where we had to stop and figure out how things were supposed to fit together on our own. The biggest concern is the quality of the sheet metal. It is extremely thin. You can actually put a hole through it with a screw without applying much pressure at all. That makes me question how well this shed will hold up over time, especially in bad weather. For the price, I expected better quality and a much smoother installation. We finally got it assembled and sealed, so now we’ll see how long it actually holds up. I would recommend being prepared to purchase additional screws, sealant, and possibly other supplies if you decide to buy this shed.

El armado tiene que ser entre dos o mas personas forzosamente y las instrucciones no siempre son tan lineales Lego con varias piezas dañadas y mal empaque

La lamina es demasiado delgada, quedan varios espacios entre las uniones de marco a puerta y techos, con esto se va a meter el polvo y agua, por solo $10k mas pude comprar un contenedor chico... por eso, creo que esta muy caro el producto......

Muy buen producto medidas exactas y muy amplio. Muy recomendable

Llegó incompleto no trae tornillos , no trae instrucciones el empaque en pésimas condiciones

Llegó incompleto, sin tornillos y sin instrucciones, pésimo servicio