Auxbeam XP-Ultra Series 3Inch 80W Spot Flood Combo Ditch Lights, Far & Wide Amber White Cube Lights Offroad LED Bar, 9600LM Yellow Driving LED Pods with Light Covers, Pair

If you're in the market for LED fog lights for your 5th gen Toyota 4Runner, look no further than these Auxbeam pod style fog lights. Bright, well built, and they're plug and play! BUILD QUALITY & HARDWARE: The lights themselves are made with cast aluminum and feel sturdy, heavy and seem to be well put together. There are two mounting points on each side of the light and the kit comes with mounting brackets and all necessary hardware to surface mount your lights. It also comes with a wiring kit, which I did not use. I also purchased the Tacoma/4Runner kit which came with new bezels, mounting hardware and pig-tail adapter that adapts from the Auxbeam deutsch style connector to H11. The kit comes with two lenses, one amber/yellow and one clear. Behind each lens is a soft, what feels like silicone, seal which sits in a groove in the aluminum housing. I have faith that these will remain water tight as long as the seal is installed properly in the groove when changing the lens (check the gasket and allen screws before installing). My only real gripe with these lights is the paint/powder coat is inconsistent. The cooling fins are not properly painted and there are definitely lighter areas that don't have a complete coat of paint. If you're installing these behind a grill, in a bumper, or foglight housing, its not going to be an issue. INSTALLATION/TIPS If you are installing these on a 4Runner, be aware that there are NO INSTRUCTIONS provided by Auxbeam and there are only a few videos online to guide you through the installation process. Anyone with a little DIY knowhow can figure it out, but it would have been nice to include a quick guide, pictures, or instructions. If installing in a 4runner's factory fog light housing, remember to rotate and instal the bezel 90 degrees so that the larger part of the bezel is facing towards the center of the truck when you instal the light. You will also have a little play, like 3/16th or less, to manipulate the light and reduce gaps. Don't tighten the two screws until you're satisfied with the gap and a second pair of hands would be helpful. The passenger OEM foglight on 4runners is covered by a rear plastic shield which can be a pain to remove. Undo 3-4 clips that hold the the front foglight plastic bezel, move it out of the way a bit and undo the shield clips from the front and it will pop out the back. I am satisfied with the fitment (see pics) as I was able to get the passenger side light dead on, but struggled with the driver side. For good measure, I added clear high temp silicone to properly set the gasket in the groove before assembly and added dielectric grease to the connectors to prevent corrosion. PERFORMACE Okay so these lights exceeded my expectations. Light output has to be at least equal or greater to my retrofitted LED headlight bulbs I installed last year. I opted to install the clear lenses as I needed more visibility on rural/forrest/desert roads as opposed to inclement/dusty weather and I don't off road at night. Without any kind of diffusion, they throw light high into the trees and well out towards the sides, illuminating the side of road. It's "brute force" lighting with little light control. The included amber lenses are split with a diffuser only at the bottom and I would think that might give you a little better light control. I'm happy with this set up though as it increases night visibility exponentially. I'm satisfied with the color, they don't quite match by headlights and I would guess they are just below 6500k. CONCLUSION If you're looking for reasonably priced LED pod-style fog lights or you want to replace those terrible 4Runner halogen fog lights, these are a good bet. I won't speak about longevity as I've just installed them but for the price, you get a lot of light output. I'm now looking to buy another set and install them with amber lenses behind my grill, they are THAT good.

Super simple to install, I tapped into some Ford upfitter switches and they worked flawlessly. Incredibly bright and extremely high quality. Hard to find a better deal than these.

I recently installed the Auxbeam Color Play Series SAE Fog Lights, and I’m impressed. With the correct bracket, the fit was perfect—no adjustments needed. The wiring was truly plug-and-play, making installation quick and hassle-free. The housing is solid metal, giving a durable and premium feel. These lights are super bright, and the amber lens produces a vivid yellow beam that cuts through fog effectively. The fog beam pattern is wide, providing excellent coverage for low-visibility conditions. Overall, these lights combine easy installation, rugged build quality, and outstanding performance. Highly recommended for anyone looking for reliable fog lights with a sharp amber beam.

Perfect fit in my aftermarket bumper and good light output. I will say that wiring these in on a new truck is a job so be prepared because finding a running lamp wire to tie in was a task. The lights perform well and have nice output, to the point that I rarely use my high beams. The amber lens covers help protect from any damage plus the light color helps make certain things more visible while preventing glare from road signs and fog.

Very bright lights can reach quite a ways. Comes with clear and amber lenses. Only downside I had was the lenses are not very strong and shattered one when a rock from another car hit it. However Auxbeam is fantastic and are sending replacement lenses.

So, as the title says. These are hella bright! I bought the color play in combo beam pattern, they are hooked to my factory fog light wiring in my 05 Jeep Grand Cherokee. They replaced the factory fog light. I have not hooked up the turn or drl yet because we had a big winter snow storm roll in and I wanted them on the jeep asap. The beam is VERY WIDE and VERY long distance with 2 definitive spots in the center. No cutoff line just wide flood style beam with spots. So these will be getting moved to behind the grille and I will replace them with the color play fogs. They have survived 3 large snow storms and plenty of single digit weather so far and they're doing fine. Time will tell if they last. But for now they seem to be very water resistant. I like that it comes with 2 lens colors but, honestly I'll never use the whites. The mounting bracket is of great quality and seems very durable. The screws for the bracket to housing could be stronger but should work just fine. Let me be clear about the beam pattern... NOT FOR CROUDED AREAS... You will get flashed. Alot lol

These lights bought for my SxS, they work GREAT, very bright, great quality and I hooked up with Amber DRL … cool! Nice side lighting and perfect, wide, long-distance beam‼️

Great looking lights, easy to install. Came with two lenses.

サイコー！明るくてシーズンによってイエローホワイトと切り替えできます。

Comfortably lights are bright with a focused beam that will light up trees and dunes 100-200m away. When mounted on the front bumper, the side shooters still light up the side of the track (feels like 120°). If mounted on a roof bar then these may also replace ditch lights. Wiring hardness and accessories are all of very high quality too.

I’m happy with these lights, easy to install and very bright,

.

Muy buena iluminación, la ocupe para mi moto street glide 2023 y son excelentes