Hollyland Mars 400S PRO [Official] Wireless Video Transmitter Receiver Set, 1080P60 SDI HDMI Transmission System, 400ft Range 0.08s Latency 4 APP Monitoring 3 Power Ways, for Gimbal, DSLR Camera Rig

I'm going to tell you about the new Hollyland Mars 400S PRO HDMI and SDI Wireless Video Transmitters! So the Mars 400S Pro SDI & HDMI is fine, but what is it for? The Mars 400S Pro are intended to transmit video wirelessly from a camera or other video sources to a receiver (Screen, Atem Mini Pro, video projector, etc.) with a distance of up to 120 m and powered by a SONY NPF type battery and video resolution up to 1080p in 60 frames per second. So yes the Design is totally different from the other versions of the Hollyland wireless video transmitters. Like it or not, personally I like its shape and the fact that its center of gravity is lower thanks to the cold shoe placed below the transmitter for a faster and more stable installation in my opinion of course. After each one will form their opinion on it. In terms of construction, we feel a very solid and well finished product. Which is reassuring when you're a professional. At the transmitter level the color code used is red and blue for the receiver! Very practical when you are in the rush of an installation on a shoot or on a livestream. The screen on the front also allows you to quickly read the necessary information. I still find that a percentage indicator is missing from this screen. Even though I have noticed with “ATOMOS NP-F750 5200mAH” batteries a battery life of over 8 hours, which is more than enough for filming or live! On the box we find a USB-C port which can be used to charge boxes, but also with a usb-c to RJ45 adapter to be used as VIDEO STREAM! A very practical ON / OFF BUTTON but I would also have preferred a button with a long press to turn off or turn on the March 400s pro for more security. And of course the SDI and HDMI connector as well as the location of the battery and the two antennas. The practicality of having SDI on the box, for example in my case, I used the transmitter connected in SDI on the panasonic EVA-1 camera and the receiver connected in HDMI on the matem mini pro ISO. And you can use it inversely in both directions, that is to say connected the transmitter in HDMI and receive with the receiver in HDMI. I have had the product for a few weeks and have used it on a few LiveStreaming and filming. On the other hand, I highly recommend it for LiveStream, for example in my case I use 3 Mars 400S Pro + 1 Mars 300 Pro, and it matches up very well in terms of image delay. (About 5-6 Frames of latency) On the other hand, the good news is that the flow rate has been increased on this version, we go from 8 Mbps to 12 Mbps which is not negligible in terms of quality, especially when using Livestream. Hope you enjoyed this review of the Mars 400S Pro. Ciao!

Coming from the 400s to the 400s PRO II has been a seamless, pain-free process. I am a fan of the 400s Pro II! Particularly the exceptional build quality and versatile power options offered. While minimal delay could potentially pose a challenge for live broadcasts or pulling focus, it's inconsequential for my purposes as a Gaffer. I would highly recommended for its outstanding performance and flexible power choices. The seamless ecosystem integration enhances user experience, delivering top-notch video quality with minimal latency. The system is not only customizable but also offers great value, proving accurate ranges and excellent indoor performance. A perfect addition to your kit if you are already in the hollyland ecosystem, or a great place to dip you toes and start your experience.

This is actually my 4th set of Hollyland transmitters (I own a pair of 300s, The Mars M1 Enhanced Monitor, The original 400s and now 400s Pro II). The fact that the whole eco-system works so well with eachother is a huge plus. Depending on the requirements, I have found that each of these has a usecase and the flexiblity is very welcomed. I sold my 400s Pro Is mostly because I thought the quality output vs the 300s wasn't a big enough difference to keep. Enter the 400s Version II. With previous transmitters I struggled with audio and video syncing for talking head situations such as podcasts. There are plenty of tools in my audio and video mixer to correct this, but the lower latency the more I could trust my hardware in providing a usable audio/video sync in certain situations. I can say that both the video quality and latency work very well! This has made my podcasting and recording environments much easier and convenient to work in. It does what it says on the tin and does it very well so I am very happy with these units. Definitely keeping these unlike the version Is. If I needed 4k for my workflow I might spend the extra money for the 4k transmitters, but haven't needed them yet.

Love these devices. Rock solid image over a good distance and through obstacles. This is my second one to own, and looking to get more as I need them. Set up is easy. Almost no video lag. Phone app comes in handy when setting up cameras. Not great if you need synced audio with other devices in a live program feed, you would need to adjust for delay. As for monitoring video, it’s fantastic.

Overall I'm pretty happy with my Hollyland setup. I've had connectivity issues a couple of times and at one point had to stop down production to make sure the dancing pixels my AC was seeing weren't on the camera sensor. It ended up being some sort of interference issue so we plugged on. Outside of that. Excellent setup and the price is fantastic.

Very easy to connect Tx to Rx. Came with one power adapter which is very handy. Did have difficulty penetrating thick ICG wall, but did ok. With longer cable and better placement, this will do all we need it to. And has SDI out for our tri-caster.

I love hollyland products and these are amazing. Haven’t ran into any troubles with them at all yet.

Simply put, This device was flawless. I needed it for video transmission from two cameras in a different room about 10 feet from where in another room was the ATEM Extreme ISO video switcher. Plugged in the transmitters to the cameras, the receivers to the rear of the ATEM (HDMI inputs) and it found separate channels in the space of about 45 seconds and it worked flawlessly. I have two, and both were beautiful. The only thing I had a little bit of trouble with was the firmware update one required. Wasn't the easiest process because I couldn't get the Hollyland app to recognize the device that needed the firmware update.

Hay que indicar que solo viene la unidad receptora, no todo el Kit "emisor - receptor", la información del vendedor confunde un poco.

Hoy les contaré mi experiencia con el Hollyland Mars 400S Pro. Los compré el 2 de noviembre de 2020, y desde entonces se han convertido en mi producto favorito. Los compré el 2 de noviembre de 2020, y desde entonces se han convertido en mi producto favorito. Hablando del producto, me encantó su empaque compacto, se adapta a todas partes. El uso de colores para diferenciar entre transmisor y receptor es también un plus que otros modelos no tienen. Hablando de su uso puedo decir que son muy fáciles de usar, sólo tiene que poner la batería y un cable hdmi o sdi y que simplemente se conectan entre sí, usted no tiene que mover nada (a menos que desee cambiar el canal). También tienen otras funciones como el modo silencioso de los ventiladores, que en modo normal son inperceptibles, en modo silencioso lo son aún más. Los he utilizado en cámaras como blackmagic cinema pocket 4k y 6k, panasonic s1 y sony a7siii y en ninguna de las cámaras me ha dado problemas. Finalmente he podido mejorar mi flujo de trabajo entre fotógrafo y fotógrafo, ahora puedo estar hasta 100 metros de distancia y estoy seguro de que la toma siempre estará enfocada.

For this price, this is the best TX/RX you can buy in 2021. The video compression is really good, the image quality looks pretty similar to direct HDMI or SDI output. For the range itself, it's always better to calculate that it's half as what they say for video transmitters, even Teradeks. But I can tell you I tried testing it 300ft away and it still worked. Important to note that if you really need to receive a drop frame signal (like 23.97 or 29.97) - this isn't for you. The TX can receive drop frames, but the RX will output 24p or 30p. Not a problem for how I'm using it, but it might be for others. Bonus points to the Hollyland customer service. They found me on facebook after my purchase for some reason, and started chatting with me, eventually sending me free accessories like their mushrooms antennas.

Getting very good projection from my camera to screen without the jerkiness of a cheaper make I tried. There is a tiny bit of lag but I’m not sure there’s a transmitter/receiver device that can improve on it at this price

Good product