8P/6P Crimper Tool

I thought I'd get what I paid for. But I was SO surprised when I got the kit! The crimper is good. It's a little hard to get the cable end into until you figure it out, but it cuts close like it should. The tester is cheap, but it tests good, and the "dumb" end it durable! I dropped it from 15' and it survived. The ends are good quality and the end covers are good. I'd say the ends end covers are the same quality I'd get at Lowes or Menards. VERY SURPRISED OVER ALL for the price vs the quality.

This crimper kit is excellent. Good weight to the crimper. Slick design. I did all my home connections via cat 6 and all tested 100%. Thank you!

Well built, works perfectly. All in 1

The tool works fine, and will get you out of a jam in a pinch.I will start off by saying the connectors that come with this kit are not suitable for cat6 or above. Every cable I made with a cat6 cable using these connectors wouldn't go over 100Mbps with cable rated for 10Gbps. I remade those cables several times, and finally with cat6 jack ends at which point the cables got the proper throughput.The tool however, is of good quality overall. The cutter splits cables with ease. The stripper works, just be aware you will cut your colored wires if you try to spin it like you do with the little push down cutters, so give it a no spin squeeze, maybe a jiggle, then just yank the jacket off with your hand. The crimper works fine, with the connectors I used in it, they appeared to seat well(note: I gave it three solid presses) and hold the cable good with cable that has a core. With the connectors that came with it, there was a few times I didn't feel like the press seating well enough, so I used my 25 year old crimper to make sure.Every cable I have made with this tool has worked without question, regardless of the note above about the speed issues with the included connectors.If you need a kit, don't get this. Find one where you can verify the rating of the included connectors and etc. If all you need is a tool, this tool will work, go find a tool only package.This kit, or a tool, is good bang for the buck if you can catch it on a discount. I wouldn't pay the full retail price for it, and instead recommend searching around more.

This was my first time terminating ethernet cables, and I wasn't sure if I could handle it. A couple of YouTube videos and this kit got me up and running in no time. I only had a couple of bad connections. Take your time, and pay close attention to the directions. I was able to make my main run and a few short cables. It didn't take much time, and I saved a lot of money with this. The tool seems very sturdy, and the circuit tester and stripper are adequate for occasional use.

Great tool with all you need to fix or add a cat5 line. The diagram on the sice of the tool really helps out when lining up the cable colors

Once I received the kit, I found the modular connectors that came with the kit were bigger in size than the ethernet wall sockets in my home. On reaching out to the customer service, Nancy from the customer service team patiently worked with me to help me understand that crimping the connector to the cable also reduced the width of the connector so that the crimped end perfectly fits into a LAN socket /ethernet wall socket. Thanks a lot Nancy, for your timely help. I recommended this seller and its products based on its excellent customer service

good product.

Where has this tool been all my life? For all these years, I have been struggling with RJ45 network cables with broken clips. I finally decided to buy a tool to fix it it works great. The tool is really easy to use. It does take a little bit of trial and error to get the colored cables aligned correctly, but that's my fault and not the tool or anything.If you have lots broken clips on your network cables and you have the patience to fix them all, then get this tool! No more duct-taping a broken clip network cable jack to the wall or devices anymore.

Llegó en tiempo, y es muy fácil de usar. Disminuye las fallas que se tenían con el otro modelo (En donde no se cortan los cables).

These are so much easier than regular connectors. You can double check the wires before you crimp. And you can also pull the wire tightly into the connector before crimping. We use this a lot for being amateurs- probably put on over 50 ends by now…. Still works well. Nice cutters too.

The tool is well made and performs all of its functions well. The plugs work well and the tester gives peace of mind on a long cable installation between a router and an outdoor wifi aerial. All round very good stuff at a very reasonable price.

Purchased a few months ago to put push through rj45 ends on for camera job. Crimper works 100% tester is extremely useful for dault finding. The included rj45 ends and boots are of great quality