LLPT 94 Adhesion Promoter 10ml Bottle Primer with 10 Dry Wipes for Acrylic Double Sided Mounting Molding Tape

I understand that some people received leaking packages, but there was no problem with my order. The two bottles are shipped nestled in a foam block inside a cardboard box so there is practically no way that they should arrive broken, and I'm thinking that earlier problems may just have been from the tops not being screwed on tightly. I used this product to promote adhesion between a 3M VHB adhesive pad, and a 3D printed fitting of carbon fiber reinforced nylon filament (typically difficult to adhere) to mount a tablet on an exercise bike, and it appears to be working perfectly.

I've been working with vinyl for years and this is the best adhesion promoter I have ever used.

I used this to replace an existing 3m sticky pad on a dash camera I installed incorrectly and it has worked well initially.

A must when using llpt 2 sided tape. Insures a tight bond on tile of a rack in the shower

Adhesion promoter work great plus size of the bottles are better than the little foil packets you get that are half dried out when you need them.

Helps a lot to stick tight very fast in any surface

Exelente producto lo recomiendo al 1000%

Opted to use this brand of adhesion promoter instead of the 3M 4298 pads or the Primer 94 pen to get the most bang for the buck. As expected, the pad that I opened up was dry but I just laid adhesion promoter from the bottle onto the surface I was working on with the provided brush attached to the inside of the cap and then used the dry pad to carefully spread it over the working surface for complete coverage. Suffice it to say that I have more adhesion promoter left in the bottle than I will most likely ever need (along with 9 more pads). If you are a hobbyist that utilizes adhesion promoter often, this is definitely the best way to go to save costs. And it works.

Previously I had cleaned the area of my car's dash with 90% rubbing alcohol, and applied my 3M Dual Lock which had the acrylic backing tape. It held fine for a couple of weeks, but slowly started to let go, so I bought this adhesive promoter to see if I could improve the bond. I re-cleaned the area with alcohol, and taped off the remaining area with masking tape so as not to get the adhesive promotor anywhere it wasn't needed. The area has some texture to the plastic, so I did three coats of adhesive promoter, letting each coat dry for a few minutes. Then I applied a new strip of Dual Lock and the bond was immediate. No second chances on alignment! I'm glad I got it right the first time. Clearly a superior bond vs without the adhesive promoter. I only needed a single foil pouch to do all three coats, and the applicator had plenty of product on it, not dried out as many have found. I did tighten the lid on the included bottle when it arrived, as there was a strong smell of the product on arrival, but no apparent leakage of the fluid.

I was to stick a security camera with 3mm tape and this adhesive promoter on a wall and it seems to be holding well even during winter!

poorly screwed, leaked while in storage, I do not recommend this store, they do not check before sending, and I do not have time to waste time on returning it now

Perfect adhesion to material.

Adhesive promoter works great